Hi lads.

My car uses a Pectel T2 but I can't find anywhere that does diagnostics. So I want to get software and lead so I can do my own. No mapping etc just diagnostics and sensor logging.

I have a Pectel monitor downloaded from an Escos website but maybe for those ecu's. I've had some software sent to me by email by a pal who also has a T2 and his is working only on Windows 98. I'm windows 7 and it won't run, even using WIndows 98 compatibility mode (unless it needs a lead all connected up first to work?)
I need a lead too but again no idea where to look. I have a VCDS lead but doesn't seem to work.

Anyone able to help?

 

I've just sold the laptop and lead I had to somebody who i thinks is running pectal, on a cossie mk2 escort, I had a lead made by my mate, it was for cossie management though, the pc also needed a serial port.

Have you had a look at the set up msd sell

http://shop.motorsport-developments....weber-91-p.asp

This might be of use?

 

I have a Dell laptop and a Samsung notebook and neither has serial ports

 

I brought the computer and lead mate ,can send you the software to do it and you the diagram to make the lead,but you need a computer with a serial port nothing else will work .

 

If you don't mind mate that would be excellent. My lasses bro is into his computers so I'll ask him about serial ports, even if I change my laptop or summit.

 

send me your name and address and will send you a copy and the lead diagram

 

you could chance a serial adapter, listed halfway down this page

http://www.extraefi.co.uk/Misc_products.htm

 

This the diagram?


Will pm my details over

 

Pm sent

 

thats the diagram yeah

 

That lead drawing suggests it is for IAW monitor which works with the Weber Marelli L8 & P8 ECUs.

To monitor datastream from a Pectel T2 you'll need a male jack plug to 9pin serial lead and a copy of DESCPRO.

 

and the correct map base for the type of ecu!
Needs to be loaded onto the laptop for the descpro to work with the ecu

 

i have descpro and pi tool box i will send you that as well ,not a problem its easy to make the 9 pin jack pin one up. looks like large headphone jack, had it on my t6 pectel ecu

 

Yeah I have the jack connector there too so ideal

 

I may be able to possibly get more leads made up.

 

Let me know how much stu thanks

 

You will still need the correct profile on the laptop to access the ECU even if you have Descpro and the correct lead so it depends which ones come with the Descpro install you get. There are lots of versions of Descpro and even more profiles.

That diagram above is totally wrong for what you need cable wise. You need a simple TX/RX/Comms Ground cable. (3 wires)

You may also find that the ECU is locked as well.

Good luck!

 

Yes polly x the leads for a weber iaw software motitor, not for the pectel it just reads the data stream from the ecu

 

Like I said. The lead is the least of your worries!

 

I have some profiles ,and maps that Ahmed give me that's if its not locked if so it's off to pectel

 

If you a fancy a trip to Brum I will put it on a car and see if I have a profile for it.

 

Sorry but I cant understand what you're trying to say there!!

 

I've emailed Mountune themselves to ask if they can help with any of it with regard to profiles etc as they mapped it but awaiting their response. But I know a lad with a T230 and same ecu as mine who has been successful in getting the software working. He got his from Paul Hills but my laptop doesn't like it for some reason (as said in first post)

Does the lead and everything have to be connected for the software to load or should it load up anyway?

 

Sorry martin it sound right have some maps on my laptop from my t6 pectel for different injector boost air injector and other things but have no way to unlock it as don't have the pectel dongle

 

If its a T230 ecu then it will be locked, you will either have to have the ecu fixed for 'any developer' (in which case you will loose the map) or try and get a dongle (good luck with that option!).

 

So you can't look at the maps you have off line on your laptop?? If they need a dongle then I'd bin them off, if they're simply password protected then maybe try and get hold of the password?? Btw puctuation would make it easier to read

 

its this bastard iphone martin, and i was dragged up lol

 

As I say Martin, I know a lad who has his T230 running on the software and his is locked and he can see what each sensor is showing up in real time.

 

Bump...removing my SCS T38 and installing a new EFR turbo so need a cable to tune the T2. Anyone able to help me out with where I can get a cable or drawings so I can make one?

 

You have pm

 

Look on ebay for the data cable.last time i looked there was one for sale on the