cold start problems
#1
Advanced PassionFord User
Thread Starter
Join Date: Jan 2006
Location: preston
Posts: 1,639
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
any ideas guys my car is a right pig to start when cold she just spins over but wont fire have to pump the pedal to get it to catch , once warm she starts fine first turn of the key
![Wall](https://passionford.com/forum/images/smilies/wall.gif)
#2
Advanced PassionFord User
Join Date: Nov 2007
Location: home
Posts: 1,593
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
ive had the same prob...i used to get sum1 to press the "flap" down on the metering head while i turned the key..when on my own i wedged it open with a bit fag box or summat till i could get it set up
#4
PassionFord Regular
Join Date: Oct 2006
Location: Puticlub
Posts: 356
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Check the following:
- Auxiliary air valve device, (rear from inlet manifold)
- Cold start injector and all injectors (maybe are faulty)
- Termo-time switch sensor (inlet manifold down cold start injector)
Also will be ok check and clean pluggs.
CheeRs
- Auxiliary air valve device, (rear from inlet manifold)
- Cold start injector and all injectors (maybe are faulty)
- Termo-time switch sensor (inlet manifold down cold start injector)
Also will be ok check and clean pluggs.
CheeRs
#5
Advanced PassionFord User
Thread Starter
Join Date: Jan 2006
Location: preston
Posts: 1,639
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
wonder if its the cold start valve it did the same with the old engine and when i changed engine i used my old inlet with all the injectors and sensors , still got the one from the new engine somewhere in the workshop so might try changing it
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Archiejay
General Car Related Discussion.
7
12-08-2015 12:07 PM