sethgremlin

hi i hope someone could help me, i have an orion lxi 1993 model, when i come to a stop or put the clutch in, every now and then it cuts out.
sometimes the revs move up and down by themselves too.
what could be causing this and is it cheap to fix?
thanks
Seth

johnny99

Idle control valve, poss.

John

sethgremlin

thanks i'll check it out.

tabetha

As said ISCV most likely, but also give the MAF a clean at the same time.
tabetha

instain

if its anything like my old 1 it runs fine just when you cone to stop and take your foot off the accelerator, if it is i got told ecu was on its way but dont quote me cause i just weight it in at that point

sethgremlin

thanks, i got quotes for the parts, just need to find a cheap place to fit em.

tabetha

DIY easiest thing in the world to do.
tabetha

sethgremlin

heh not for me, although i do know a couple of people who might be able to help.
thank you

tabetha

A VERY easy job to do, more by feel than sight but still easy.
tabetha

sethgremlin

i'll have to get me a haines i think.
this car is a nice car other than the cutting out issue.
it only happens once its warmed up.

dangerousscally

ive had the same symtons with ma s2 rst running mfi but only when it gets warm. i adjusted the tickover screw abit. it runs much better when of the accelrator

sethgremlin

apparently my car is the cfi model so i have no icv or maf sensor. so what should i do?