hi all as you may or may not know ive been having problems getting my xr2i too run and im rapidly loosing faith im tempted to scrap

the car will not spark ive done voltage and resistant checks on the ignition coil , crank position sensor , edis4 and ht leads and their all fine ive also bought new sparkplugs (motorcraft) and it still wont spark it just cranks over and over and theirs no spark at all

has any one got any ideas ?
could it be the Ecu although everything else is working

 

sounds stupid i know but have you checked all the fuses?

are the dash lights coming on when you turn the key?

if you look in the enginebay part of the engine loom will clip into the car loom, the plug with have 7 wires (iirc) going through it, disconnect the plug and check that the red wire is live, also check the black and the black/green wire are live when you put the ignition on.

sounds like a power feed problem, ie fuse etc. either than or the ecus wankered. check the above though.

 

thanks for the responce

all fuses are fine

all lights come on everthing works fine apart from getting no spark

and ill check wires 2nite cheers