percybigun

just had a few more things done:

-snow performance water/methanol injection system
-bigger crank pulley for more boost (this is working VERY well indeed!)
-ARP conrod bolts
-adjustable cam gears
-lightened flywheel
-black diamond uprated clutch
-bored out the hole much bigger in the inlet manifold where the throttle body is
-42lb injectors
-oil separator and catch tank
-big cold air feed to cone filter
-finally got the nitrous system hooked up with 25bhp jets

its booked in for a chip remap on 14th january so i will post up results and power curve graphs etc. also getting the cam gears set up properly at the same time.

its MUCH quicker than before (now on 10-11psi instead of 7-8psi), but i am not driving it flat out just yet until the remap. i had a dabble of the nitrous last night and bloody hell it doesnt half kick in even with just the 25bhp jets

also it is alot louder than before, presumably because theres more air going through. it sounds completely mental with the nitrous activated

whitecossie

have ya got any vids of the car would love to hear it with the supercharger on

pjv7771

who did your nitrous mate

lazy_arse_pie

christ on a bike that must be one rapid mondy

percybigun

the nitrous system (and virtually all the work) was done at www.powerandperformance.co.uk near norwich

theres a video clip here when it was on lower boost but it illustrates the sound very well indeedhttp://www.percybigun.co.uk/mondeo1/NOS_MONSTER.wmv

Twins

iTrader: (18)

16vzetec

whats the power figure???
how much is the conversion?

whitecossie

rage cannot be found

COCHYN

Doesn't look very quick on video, but I'm sure it is. Very nice build you have there. What's kind of power is she dishing out, without Nitrous?

percybigun

it was 207bhp at flywheel (without nitrous) before these new mods were done when it was on low boost. once its remapped and had the cam gears setup, it should be 230-240bhp without nitrous.

the supercharger kit costs about Ł1300 shipped, its the one from www.jacksonracing.com for ford focus but i got it from www.importcarpartsplus.com for cheaper.

right click and save target as on the video link.

Fiddy

sounds lovely, wish mine looked half that good, very nice matey.

choppa

is that an M45 or an M60 blower you got there?

percybigun

M45

heeman10

Looks brilliant Percy!! I don't see a cold air feed to the filter though?? Vid is downloading

MadMac

How much did the conversion cost you to do? I was looking at doing a supercharger conversion on the 2.0 Zetec I have in the garage.

What sort of power out put are you expecting too?

Charlie Chalk

iTrader: (1)

Not the car i would have the engine in personally, but smart anyway



Any further "big" plans?

percybigun

cold air feed goes under it. few more plans like maybe a intercooler, headwork etc.

as it is now it should be round about 240bhp (flywheel) plus nitrous.

the conversion cost about Ł700 at www.powerandperformance.co.uk but add to that the cost of management, bigger injectors and some other bits.

makes a change for something like this to not be in a focus, sierra, fiesta or escort lol

Stavros

car sounds cool

how you gonna do that tho? supercharger is mounted directly on the inlet manifold isnt it?

to fit an intercooler would mean fitting the charger somewhere else, major work.

IMO you will be able to keep charge temps in check (and therefore maximise power) with water injection alone.

percybigun

yeah thats what i thought but there is somebody making a way round it here:

http://forums.focaljet.com/forced-in...sign-here.html

anyway i had my car remapped, cam gears setup etc at engine advantages on saturday. it made 230bhp at flywheel without nitrous, and 257bhp at fly with a 25 shot of NOS.
water injection aint working properly yet, but should be easy for me to sort out.

dyno sheet here (right click and save target as, or copy and paste to browser)

http://www.percybigun.co.uk/mondeo1/dyno.jpg

RST TOM

nice one mate