Intercooler Test (Pics added Page 10)
13-11-2010, 06:23 PM
#367
Only messing mate you know it works wonders on your car, i'm really interested to see yours with a Hart fitted - treat yourself for xmas
Just one genuine question regarding this cooler, the core height is smaller to a normal one and once fitted behind say a standard 3dr bumper will there be enough air flow as the standard bumper is pretty restrictive for the size of the spec r as it doesn't come up as far as the grill.
13-11-2010, 08:00 PM
#369
PassionFord Post Whore!!
13-11-2010, 08:12 PM
#370
i'm really interested to see yours with a Hart fitted - treat yourself for xmas
Just one genuine question regarding this cooler, the core height is smaller to a normal one and once fitted behind say a standard 3dr bumper will there be enough air flow as the standard bumper is pretty restrictive for the size of the spec r as it doesn't come up as far as the grill.
Just one genuine question regarding this cooler, the core height is smaller to a normal one and once fitted behind say a standard 3dr bumper will there be enough air flow as the standard bumper is pretty restrictive for the size of the spec r as it doesn't come up as far as the grill.
I will see if i can get some photos for you.
There must be enough air flow other wise Mark Shead would of told Pete about it.
Steve
Last edited by cossie4i+; 13-11-2010 at 08:13 PM.
14-11-2010, 01:37 PM
#379
afternoon young pete long time no speak fella 3 door its tucked up lol like it has been since i have owned her she needs a good set up at the cross roads now need to sell sapp or 3 doors come next year lol me thinks it will be the sapp as i aint really had a chance to enjoy the 3 door yet ,hope ya car is all well fella
3 door its tucked up lol like it has been since i have owned her she needs a good set up at the cross roads now need to sell sapp or 3 doors come next year lol me thinks it will be the sapp as i aint really had a chance to enjoy the 3 door yet ,hope ya car is all well fella
17-11-2010, 02:57 PM
#386
mine has just arrived today
when i spoke to pete today, he said your car made 26lbs more torque than the airtec cooler when danny looked back through figures
i'm sure danny will comment on this when he see's it.
i had some extra brackets fitted for a oil cooler
when i spoke to pete today, he said your car made 26lbs more torque than the airtec cooler when danny looked back through figures
i'm sure danny will comment on this when he see's it.
i had some extra brackets fitted for a oil cooler
Last edited by B13 JUS; 17-11-2010 at 05:03 PM.
17-11-2010, 04:16 PM
#388
Will do a double check for you tomo when im down at ep..
cheers danny
17-11-2010, 05:32 PM
#390
here are some more pictures i asked pete for, of my cooler fitted to a 3dr. also for anyone who was asking about it fitting with other rads, these coolers fit all rads.
the pictures of the 2 coolers are for.. a hart plenum and 1 to match the standard plenum.
this is a picture of the off set brackets you get when you buy the cooler. (for free
)
here's one with my airtec 60mm rad fitted with my cooler
picture of how it lines up for the best flow possible
i wanted oil cooler brackets fitting because i will be adding one at some point, this was all in with my price.
this is just for show because the one pete will supply me is going to be side exit cooler so it will save on the price of the fittings, not needing 90 degree bends
also it will be rubber mounted to eliminate heat soak
the pictures of the 2 coolers are for.. a hart plenum and 1 to match the standard plenum.
this is a picture of the off set brackets you get when you buy the cooler. (for free
)here's one with my airtec 60mm rad fitted with my cooler
picture of how it lines up for the best flow possible
i wanted oil cooler brackets fitting because i will be adding one at some point, this was all in with my price.
this is just for show because the one pete will supply me is going to be side exit cooler so it will save on the price of the fittings, not needing 90 degree bends
also it will be rubber mounted to eliminate heat soak
Last edited by B13 JUS; 17-11-2010 at 05:53 PM.
17-11-2010, 06:53 PM
#394
Any pics of what the cores look like internally ?
External appearances look vaguely familiar. Although given how they seem to perform....they cant be what I'm thinking.
External appearances look vaguely familiar. Although given how they seem to perform....they cant be what I'm thinking.
17-11-2010, 08:43 PM
#399
I've found that life I needed.. It's HERE!!
Join Date: Nov 2004
Location: stoke-on-trent
Posts: 1,058
Likes: 0
Received 0 Likes
on
0 Posts
well he cant exactly put any design into the core itself as its just a off the shelf core from garrett with his end tanks on.
im hoping to take my car down to EP again early next year so they can help me with my fuelling, might see if we can bolt my cooler onto dannys car for a bit of testing to see how the big thick ebay one holds up
im hoping to take my car down to EP again early next year so they can help me with my fuelling, might see if we can bolt my cooler onto dannys car for a bit of testing to see how the big thick ebay one holds up
