i can fix it

 

did the head come complete to you?

 

no i built it from scratch

 

Are you deffo sure you put all the valve spring seats in?poss put 2 on one and left one with out on number 2?

 

nooooo, its perfect mate

 

so its on the over run you say!have you checked double checked the wiring?i know you say its a new loom but u never know!perhaps go on a road test with the good old bulb test on cylinder 2 and see if you are getting a interment short ?

 

loom is mint, i made it myself, its got a rattle developing down below

it will be a bore clearance issue im sure, i was lazy putting it back together if im honest, i didnt do the job as well as i did the first time, i kind of lost interest in it after the seat fell out. that was the final blow

 

noise poss det if you have a loom fault causing over fuel?got to be worth a go?

 

its not over fuelling, its deffo got a miss a certain rpm,

 

still could be poss mapping issues?maybe needs set up?

 

it is setup!

 

crack the head off mate its only a couple of hours work u got nothing to lose and everything to gain!

 

i will on saturday

 

good egg

 

when it gets stripped for bits

 

you come this far you might as well finish it mate!

 

its finished alright

all the bits are sold already

 

you aint taken payment yet!might as well have a look before you make ya final decision!

 

pmsl

 

Not good to hear James after all your hard work
Sell all the parts off of your engine and i will do you a super cheap deal on mine its just run in so ready to drop in and get stu to map.

 

Good plan Neil

 

Great news for me then

Steve.

 

Noooooooooooo i want his rear brakes

Steve.

 

m5

 

you can buy my sapp if you want james!

 

mmm, let me think, err no thanks

 

your tired and stressed!I tell you what,as its you i will hold it for you over the weekend(will hold longer if required week,month,year)so you can sit down and have a proper thnk about it ok!?

 

pmsl

bloody low class ford owners

 

 

I dont know if Doug still owns it, its been at Tonys all year so far

Steve.

 

i think tony wants to buy it

 

I think he has had it so long he has taken ownership

Steve.

 

lol for 4.7k he can

 

How much

Its only a old taxi

Steve

 

far to cheap' your car is mint Dougie

 

cheers doug see not only do you have a class name but you know a class car when you see it prob with my car its not hpi clear chap!rear end damage back in 1996!not that it should matter as it is a straight car,plus has a valuation of 6.5k on it from rsoc!but in real terms i would be lucky to see 5k i think

 

Damn , how long did it take you to drive up to tony?

 

Only a couple of hours so its not to bad!