My FRST back from Frenzy Performance :) - UPDATE
#1
My FRST back from Frenzy Performance :) - UPDATE
Hi,
Now got my car back from Frenzy Perfromance after having the boost monkey Gen 8 ECU and new loom fitted. Karl has done a top job, explained any issues we had along the way and kept me updated every step of the way. Very impresseed!
The car now droves lovely and delivers the power very well for the stage 3 T2 turbo i had fitted. Work is very neat too! Will be back for more work when i can decide which way to go (zetec or re-build CVH)
Anyway few pics below - Had the following done
New Boost Monkey Gen 8 ECU
New Loom
New Rad
New Intercooler
New stage 3 T2 turbo with cosworth internals
New MSD actuator
New MSD fuel pump
New Brainded fuel lines
New hoses
New leads, plus and distributer
New Exhaust - Mongoose 4"
New ford fuel pressure regulator - Mine gave way! £330 brand new from ford!! killed me lol
Live Map
Few pics below
New lines going in
New turbo on - Painted it too
New loom
New regulator
Cleaned the bay when home
Now just to change back to my normal wheel for ford fest - hope to see you all there
Now got my car back from Frenzy Perfromance after having the boost monkey Gen 8 ECU and new loom fitted. Karl has done a top job, explained any issues we had along the way and kept me updated every step of the way. Very impresseed!
The car now droves lovely and delivers the power very well for the stage 3 T2 turbo i had fitted. Work is very neat too! Will be back for more work when i can decide which way to go (zetec or re-build CVH)
Anyway few pics below - Had the following done
New Boost Monkey Gen 8 ECU
New Loom
New Rad
New Intercooler
New stage 3 T2 turbo with cosworth internals
New MSD actuator
New MSD fuel pump
New Brainded fuel lines
New hoses
New leads, plus and distributer
New Exhaust - Mongoose 4"
New ford fuel pressure regulator - Mine gave way! £330 brand new from ford!! killed me lol
Live Map
Few pics below
New lines going in
New turbo on - Painted it too
New loom
New regulator
Cleaned the bay when home
Now just to change back to my normal wheel for ford fest - hope to see you all there
Last edited by JK12; 16-11-2015 at 02:10 PM.
The following users liked this post:
slammedorion (04-05-2021)
#5
10K+ Poster!!
That does look really nice.
Trending Topics
The following users liked this post:
JK12 (03-09-2015)
The following users liked this post:
JK12 (04-09-2015)
The following users liked this post:
JK12 (04-09-2015)
The following users liked this post:
JK12 (04-09-2015)
The following users liked this post:
JK12 (09-09-2015)
The following users liked this post:
JK12 (10-09-2015)
The following users liked this post:
JK12 (11-09-2015)
#21
Well small update - Been thinking long and hard if i should re-build the CVH for more power or go Zetec, did not want to go away from the CVH as was worried it takes away the orginality of the car??
But then found this for a price i could not refuse! currently gathering new oil pump, water pump, gaskets, belts etc to freshen this up! Looking for decent clutch too if anyone can recomend one?
Need to see if i can fit decent manifold on with out having to cut the front of the RST bumper as want car looking standard from outside! (any one know?)
Box wise im going to order a stage 2 plus from CTS - Hoping this will help put the power down!
So hoping to have car back with karl at Frenzy performance in January to get her running!
But then found this for a price i could not refuse! currently gathering new oil pump, water pump, gaskets, belts etc to freshen this up! Looking for decent clutch too if anyone can recomend one?
Need to see if i can fit decent manifold on with out having to cut the front of the RST bumper as want car looking standard from outside! (any one know?)
Box wise im going to order a stage 2 plus from CTS - Hoping this will help put the power down!
So hoping to have car back with karl at Frenzy performance in January to get her running!
#24
PassionFord Post Whore!!
iTrader: (4)
Car looks spot on mate! I've seen lots of Karls work and I am always impressed with his attention to detail when doing ecu installs.
I have seen a thread on here recently with Karl Norris using a MK2 focus RS gearbox on a zetec. Might be worth a look in as its shorter than the mtx75 so wouldn't need the inner wing chopping about and also rated to 400 lbs or something silly! Plus has good ratios.
Its what I would be doing if I were going high powered zetec!
I have seen a thread on here recently with Karl Norris using a MK2 focus RS gearbox on a zetec. Might be worth a look in as its shorter than the mtx75 so wouldn't need the inner wing chopping about and also rated to 400 lbs or something silly! Plus has good ratios.
Its what I would be doing if I were going high powered zetec!
Last edited by Rob_DOHC; 16-11-2015 at 03:53 PM.
The following users liked this post:
JK12 (17-11-2015)
#33
Hi guys and girls,
I have got a similar question to the title of this thread. I have got a DSF2000 that I have owned for about 13 years however. I have lost the instructions and I need to upload the factory tune to the vehicle. Can anyone help please?
Many thanks
Dale
I have got a similar question to the title of this thread. I have got a DSF2000 that I have owned for about 13 years however. I have lost the instructions and I need to upload the factory tune to the vehicle. Can anyone help please?
Many thanks
Dale
Thread
Thread Starter
Forum
Replies
Last Post
AGAR-COSWORTH
General Car Related Discussion.
15
24-05-2021 12:11 PM