PassionFord - Ford Focus, Escort & RS Forum Discussion
The top mounts are being replace with WRC adjustables. I am going to tidy this area and remove things like the bolt sticking out, weld up and redundant holes then after cage goes in it will all be painted. Not sure on having it smoothed like proper 90s or not yet.
The top mounts are being replace with WRC adjustables. I am going to tidy this area and remove things like the bolt sticking out, weld up and redundant holes then after cage goes in it will all be painted. Not sure on having it smoothed like proper 90s or not yet.
0 2018/01/27 09:01:55
0 2018/01/14 04:37:40
I pretty much clean the car every time I drive it so don’t mind a lot of wheel cleaning
I pretty much clean the car every time I drive it so don’t mind a lot of wheel cleaning
0 2018/01/14 04:37:32
Old rear 195
Old rear 195
0 2018/01/14 04:30:42
Old front wheel and tyre
Old front wheel and tyre
0 2018/01/14 04:30:32
New wheel and tyre rear view
New wheel and tyre rear view
0 2018/01/14 04:30:22
New wheel and tyre side view
New wheel and tyre side view
0 2018/01/14 04:29:38
When we were 17 my mate had a new MG metro borrowed from his mum, he went through really fast and swamped the engine, water came in through the doors as the river was in flood.
When we were 17 my mate had a new MG metro borrowed from his mum, he went through really fast and swamped the engine, water came in through the doors as the river was in flood.
0 2018/01/10 12:17:11
We once went through in my mates MG metro (we were young) and really went for it, it broke down and the car began to move in the water and the river came in through the doors...there was a sign saying "flood"
We once went through in my mates MG metro (we were young) and really went for it, it broke down and the car began to move in the water and the river came in through the doors...there was a sign saying "flood"
0 2018/01/10 12:15:35
Pressure and return both on and all now pointing in same direction and tight
Pressure and return both on and all now pointing in same direction and tight
0 2017/12/30 07:45:56
Reservoir on 90 and then back to supply the pump
Reservoir on 90 and then back to supply the pump
0 2017/12/30 07:45:50
It’s at an angle in the pic as the jar is jacked up on one side.
It’s at an angle in the pic as the jar is jacked up on one side.
0 2017/12/30 07:45:43
Moved the reservoir back so had to weld up a 90 degree bend so made a simple mount off the 90 to hold it to the bulkhead.
Moved the reservoir back so had to weld up a 90 degree bend so made a simple mount off the 90 to hold it to the bulkhead.
0 2017/12/30 07:45:37
0 2017/12/30 05:22:48
Anti vibration bit in place and wrapped the pump in rubber. When this bolts to the car it all lines up square.
Anti vibration bit in place and wrapped the pump in rubber. When this bolts to the car it all lines up square.
0 2017/12/30 05:22:41
Another angle of the bracket on the pump
Another angle of the bracket on the pump
0 2017/12/30 05:22:34
Bracket I made bolts on to the motor using the bolts that hold the motor to the pump
Bracket I made bolts on to the motor using the bolts that hold the motor to the pump
0 2017/12/30 05:22:29
This is the pirtek pressure side
This is the pirtek pressure side
0 2017/12/30 05:22:22
Trial fitted for space but I need to move the reservoir
Trial fitted for space but I need to move the reservoir
0 2017/12/30 05:22:15
Made these brackets to hold the pump to the car with an anti vibration bung in between
Made these brackets to hold the pump to the car with an anti vibration bung in between
0 2017/12/30 05:22:09
0 2017/12/25 12:07:32
About to watch Baby Driver on 102 inch screen, any other recommendation films to watch?
About to watch Baby Driver on 102 inch screen, any other recommendation films to watch?
0 2017/12/24 11:38:06
0 2017/12/21 06:20:16
Parked up at my mates hotel, looks massive next to that Rangie. It is a G wagon that has been pimped
Parked up at my mates hotel, looks massive next to that Rangie. It is a G wagon that has been pimped
0 2017/12/14 06:46:22
Like that?
Like that?
0 2017/12/07 08:10:59
Mk motorsport do these for £380 including the proper bearings. I have posted these pics somewhere else I think.
Mk motorsport do these for £380 including the proper bearings. I have posted these pics somewhere else I think.
0 2017/12/01 07:37:03
0 2017/12/01 07:36:59
Click that picture and follow the instructions
Click that picture and follow the instructions
0 2017/11/09 07:38:45
0 2017/10/03 08:05:55
0 2017/10/03 08:05:48
This is the home made back wheel made from a van wheel that I cut and spoked and used slime to seal.
This is the home made back wheel made from a van wheel that I cut and spoked and used slime to seal.
0 2017/10/03 08:05:38
Press that yellow button and just browse where the pic is and the forum hosts it for you
Press that yellow button and just browse where the pic is and the forum hosts it for you
0 2017/10/01 08:06:50
0 2017/09/29 00:40:25
0 2017/09/29 00:40:18
Here you can see the top where you put the bolt in to secure the coil pack
Here you can see the top where you put the bolt in to secure the coil pack
0 2017/09/29 00:40:11
These are the bolts for the cam cover, Mark also makes them for the other height of coil pack, neat idea
These are the bolts for the cam cover, Mark also makes them for the other height of coil pack, neat idea
0 2017/09/29 00:40:04
Coil pack bolts on to head of bolt that holds down the cam cover
Coil pack bolts on to head of bolt that holds down the cam cover
0 2017/09/29 00:39:56
New breather and cam trigger
New breather and cam trigger
0 2017/09/29 00:39:48
These ones by MK can use normal or bladed ARB. Would have been much cheaper for me To have used these instead of the WRC setup. You can use the comp struts on these and adjust the roll centre.
These ones by MK can use normal or bladed ARB. Would have been much cheaper for me To have used these instead of the WRC setup. You can use the comp struts on these and adjust the roll centre.
0 2017/09/14 01:24:31
0 2017/09/14 01:24:28