PassionFord - Ford Focus, Escort & RS Forum Discussion
Much better shape and really neat
Much better shape and really neat
0 2018/03/29 08:56:50
Getting some traction now. Tunnel is being prepped, I have asked Mark to find a way that the electrics can hide through the tunnel so that you cannot see wires in the car
Getting some traction now. Tunnel is being prepped, I have asked Mark to find a way that the electrics can hide through the tunnel so that you cannot see wires in the car
0 2018/03/29 08:56:48
0 2018/03/18 10:46:48
0 2018/03/18 10:46:38
You can see the distributor delete on the right.
You can see the distributor delete on the right.
0 2018/03/17 09:39:49
Few bits to clean up but will do that when I put the new pulleys on.
Few bits to clean up but will do that when I put the new pulleys on.
0 2018/03/17 09:39:37
I started to put bits on the engine after I had cleaned them. New Titanium bolts
I started to put bits on the engine after I had cleaned them. New Titanium bolts
0 2018/03/17 09:39:23
0 2018/03/04 08:35:14
The orange relays are timed for the front heated window, it is split in two halves.
The orange relays are timed for the front heated window, it is split in two halves.
0 2018/03/04 08:35:01
Each relay is also labelled, these will be under a cover and behind a dash panel.
Each relay is also labelled, these will be under a cover and behind a dash panel.
0 2018/03/04 08:34:54
Every single wire is labelled with dymo heat shrink.
Every single wire is labelled with dymo heat shrink.
0 2018/03/04 08:34:45
Still some shrouding and tidying to do. The little screen is the toucan that shows all the dials reading from ecu that I have shown before.
Still some shrouding and tidying to do. The little screen is the toucan that shows all the dials reading from ecu that I have shown before.
0 2018/03/04 08:34:36
I have spent about 10 hours so far but most controls are now wired in to my new loom that I am making.
I have spent about 10 hours so far but most controls are now wired in to my new loom that I am making.
0 2018/03/04 08:34:24
A bit like these
A bit like these
0 2018/02/27 10:18:01
Bead rolled floors
Bead rolled floors
0 2018/02/27 10:17:59
New floor, tunnel and bulkhead will be a bit like these
New floor, tunnel and bulkhead will be a bit like these
0 2018/02/27 10:17:57
0 2018/02/27 04:00:20
My new dash panel will be Matt black anodised so I bought these Matt warning lights as they are black legend when off (stealth) and then colour when on
My new dash panel will be Matt black anodised so I bought these Matt warning lights as they are black legend when off (stealth) and then colour when on
0 2018/02/27 04:00:14
Could wrap it like this or even have a company do a version on my red background
Could wrap it like this or even have a company do a version on my red background
0 2018/02/26 10:18:19
We were fed up with the wooden one falling over in the wind. I might powder coat it brown next time I put some wheels in for refurb.
We were fed up with the wooden one falling over in the wind. I might powder coat it brown next time I put some wheels in for refurb.
0 2018/02/24 09:27:40
Look, 1 finger and full arms length. 1000 cranking amps and 4 times the life of a normal battery. It has a little computer in there so if you leave the car sitting or leave the lights on it will turn off and then you press a button and it will have kept enough power to always start the car. Sealed and as it isn’t lifepo4 it is safe and works with normal alternator. Not cheap but 3kg is sooo light.
Look, 1 finger and full arms length. 1000 cranking amps and 4 times the life of a normal battery. It has a little computer in there so if you leave the car sitting or leave the lights on it will turn off and then you press a button and it will have kept enough power to always start the car. Sealed and as it isn’t lifepo4 it is safe and works with normal alternator. Not cheap but 3kg is sooo light.
0 2018/02/22 00:38:30
At least it was super light to push up to the trailer. Big Thanks to Mark Walker and his lovely Mrs for travelling 5 hours to come on Sunday and discuss everything needed and then do the whole journey again with the car today.
At least it was super light to push up to the trailer. Big Thanks to Mark Walker and his lovely Mrs for travelling 5 hours to come on Sunday and discuss everything needed and then do the whole journey again with the car today.
0 2018/02/19 05:00:23
I felt quite emmotional LOL as it left, there is nothing left of it.
I felt quite emmotional LOL as it left, there is nothing left of it.
0 2018/02/19 05:00:13
0 2018/02/17 08:35:41
0 2018/02/17 08:35:34
Engine will get a lick of Engine lacquer
Engine will get a lick of Engine lacquer
0 2018/02/17 08:35:26
He has done a nice job on my new big wing sump
He has done a nice job on my new big wing sump
0 2018/02/17 05:52:09
0 2018/02/17 05:40:41
0 2018/02/17 05:40:38
Billet main caps on arrow stroker crank
Billet main caps on arrow stroker crank
0 2018/02/17 05:40:36
Mark has fitted the oil pump which will allow the big wing sump to now go on.
Mark has fitted the oil pump which will allow the big wing sump to now go on.
0 2018/02/17 05:40:34
Years of modifications, sound offs and different choices of different owners have taken their toll so it will all be refreshed one way or another
Years of modifications, sound offs and different choices of different owners have taken their toll so it will all be refreshed one way or another
0 2018/02/16 10:38:33
0 2018/02/16 10:38:26
Not a lot left of the car now
Not a lot left of the car now
0 2018/02/16 10:38:20
Mark Ian going to make me a new fuel cell, this sump will poke through the bottom of the floor to fill the fuel pump(s)
Mark Ian going to make me a new fuel cell, this sump will poke through the bottom of the floor to fill the fuel pump(s)
0 2018/02/16 10:38:14
More holes than Swiss cheese
More holes than Swiss cheese
0 2018/02/16 10:38:12
Toys arrived so I can start to plan out the buttons and have ordered a modular fuse box to make the relays and loom work, the “race” button is actually the anti lag until I get the custom badge made up
Toys arrived so I can start to plan out the buttons and have ordered a modular fuse box to make the relays and loom work, the “race” button is actually the anti lag until I get the custom badge made up
0 2018/02/13 03:46:43
0 2018/02/11 09:37:24
Tunnel is coming out and new one going in
Tunnel is coming out and new one going in
0 2018/02/11 09:37:19
Part way through
Part way through
0 2018/02/11 09:37:11