PassionFord - Ford Focus, Escort & RS Forum Discussion
Here you can see the bumper with the twin exahaust holes filled and painted and the T16 style single exhaust.
Here you can see the bumper with the twin exahaust holes filled and painted and the T16 style single exhaust.
0 2015/02/02 02:23:59
0 2015/01/16 01:03:42
Here I am jumping it.
Here I am jumping it.
0 2015/01/16 01:00:52
A few people on pistonheads have been asking about my Bomber 72v Electric Bike so I thought I would post it up here too. 50mph, 4.5kw so around 10hp (think) and 50 mile range on one charge. 9 speed sequential gearbox in the hub for the pedals. wheelies are easy
A few people on pistonheads have been asking about my Bomber 72v Electric Bike so I thought I would post it up here too. 50mph, 4.5kw so around 10hp (think) and 50 mile range on one charge. 9 speed sequential gearbox in the hub for the pedals. wheelies are easy
0 2015/01/16 00:57:17
Standard engine, borg warner efr 7064, 1000cc injectors (for later, maybe) and a vipec with coil on plug. The Turbo will do 530bhp.
Standard engine, borg warner efr 7064, 1000cc injectors (for later, maybe) and a vipec with coil on plug. The Turbo will do 530bhp.
0 2015/01/09 06:33:00
Look at mine at 4000 rpm which is much more than 250 to 280bhp and that is on a less than 500 bhp level, this turbo would do 530bhp if the engine internals were optimised.
Look at mine at 4000 rpm which is much more than 250 to 280bhp and that is on a less than 500 bhp level, this turbo would do 530bhp if the engine internals were optimised.
0 2015/01/09 02:48:49
painted and new seals
painted and new seals
0 2014/12/22 03:18:22
Here you can see a caliper after it has been dipped in bilt hamber C rust remover
Here you can see a caliper after it has been dipped in bilt hamber C rust remover
0 2014/12/22 03:13:02
servo trial fit
servo trial fit
0 2014/12/22 03:08:45
I refurbed the poedal box and servo then added the clutch master, I have new rubber pedal covers to go on
I refurbed the poedal box and servo then added the clutch master, I have new rubber pedal covers to go on
0 2014/12/22 02:44:51
4x4 hubs shot blasted, new bearings and then paint
4x4 hubs shot blasted, new bearings and then paint
0 2014/12/22 02:43:57
Here you can see the added strength for the rose joint on the clutch pedal.
Here you can see the added strength for the rose joint on the clutch pedal.
0 2014/12/22 02:31:29
0 2014/12/22 02:27:34
0 2014/12/22 02:27:04
0 2014/12/22 02:25:45
Before paint, but you can see how the master will work. I will post up a pic with it in place soon with the servo etc. My 308 mm Reyland front discs are arriving soon and MT have just sorted me out with some new rear bearing carriers and he kindly shot blasted them so I can get new bearings in this week and painted up.
Before paint, but you can see how the master will work. I will post up a pic with it in place soon with the servo etc. My 308 mm Reyland front discs are arriving soon and MT have just sorted me out with some new rear bearing carriers and he kindly shot blasted them so I can get new bearings in this week and painted up.
0 2014/12/17 09:15:11
I tidied up the welds, then seam sealed for neatness and painted it up.
I tidied up the welds, then seam sealed for neatness and painted it up.
0 2014/12/17 09:12:08
Welded it all in place and added strength bars behind to stop any flex and then boxed it in so that the bulkhead has a rubber air tight seal exactly as a standard 205 does. I do not think the likes of MK have to worry about me pinching the welding from them.
Welded it all in place and added strength bars behind to stop any flex and then boxed it in so that the bulkhead has a rubber air tight seal exactly as a standard 205 does. I do not think the likes of MK have to worry about me pinching the welding from them.
0 2014/12/17 09:10:19
Checked it all moved together and then checked it passed through the bulkhead without hitting the 4 inch down pipe, it does but I am building a heat proof barrier to also protect the 205 servo and 405 master brake cylinder
Checked it all moved together and then checked it passed through the bulkhead without hitting the 4 inch down pipe, it does but I am building a heat proof barrier to also protect the 205 servo and 405 master brake cylinder
0 2014/12/17 09:08:44
Mock up of Reyland hydraulic conversion
Mock up of Reyland hydraulic conversion
0 2014/12/17 09:00:39
Old solid rear disc versus 300mm MT conversion
Old solid rear disc versus 300mm MT conversion
0 2014/12/17 08:58:07
0 2014/11/12 07:44:40
Here is me being a sideways hero....for no other reason than to show off!
Here is me being a sideways hero....for no other reason than to show off!
0 2014/11/03 02:55:54
Borg warner, I am now removing the Master Cylinder.
Borg warner, I am now removing the Master Cylinder.
0 2014/10/31 04:02:56
New Rocker Cover and coil packs along with 1000 cc injectors, The rocker was done by Mick at Spray station and the silver is a paint so doesnt need a polish. I have since wrapped the rest of the loom. Rod did the vipec loom for me.
New Rocker Cover and coil packs along with 1000 cc injectors, The rocker was done by Mick at Spray station and the silver is a paint so doesnt need a polish. I have since wrapped the rest of the loom. Rod did the vipec loom for me.
0 2014/10/31 03:58:27
Here it is sharing the driveway with my Steel Grey 205 gti, one of 300 made in that colour and I have just had a full repaint, this car is pretty much as it left the factory apart from the gti6 2.0 16v engine and brakes.
Here it is sharing the driveway with my Steel Grey 205 gti, one of 300 made in that colour and I have just had a full repaint, this car is pretty much as it left the factory apart from the gti6 2.0 16v engine and brakes.
0 2014/10/31 03:54:56
Here is the rear box now, I have the bumper off to have the old exhaust holes filled and painted.
Here is the rear box now, I have the bumper off to have the old exhaust holes filled and painted.
0 2014/10/31 03:53:37
Trial pic
Trial pic
0 2014/10/31 03:44:55