PassionFord - Ford Focus, Escort & RS Forum Discussion
If you expand this you can see the 02j code.
If you expand this you can see the 02j code.
0 2017/06/18 11:50:22
Needs a good clean up but now I have my bellhousing to bolt up to the 20v turbo, I will not use the dual mass flywheel, instead I will put on a lightened and balanced g60 Vw flywheel as my mate can buy them trade. The Ford clutch from The people carrier thingy works on this and uses the Vw hydraulic clutch push. Just need to make the other part of the adapter plate template on Sunday now.
Needs a good clean up but now I have my bellhousing to bolt up to the 20v turbo, I will not use the dual mass flywheel, instead I will put on a lightened and balanced g60 Vw flywheel as my mate can buy them trade. The Ford clutch from The people carrier thingy works on this and uses the Vw hydraulic clutch push. Just need to make the other part of the adapter plate template on Sunday now.
0 2017/06/17 09:49:49
I might cut off the extra bolt hole to make it neater as I am sure I don't need it. This is now very light.
I might cut off the extra bolt hole to make it neater as I am sure I don't need it. This is now very light.
0 2017/06/17 09:49:38
So I have roughly cut off the bit I don't need. You can see that I will retain the hole where the hydraulic clutch actuator goes.
So I have roughly cut off the bit I don't need. You can see that I will retain the hole where the hydraulic clutch actuator goes.
0 2017/06/17 09:49:24
This is the machined flat surface that we are after to mount first part of adapter plate to but I don't need the diff end.
This is the machined flat surface that we are after to mount first part of adapter plate to but I don't need the diff end.
0 2017/06/17 09:49:10
O2j gearbox from mk4 golf, split apart and removing diff and gearset.
O2j gearbox from mk4 golf, split apart and removing diff and gearset.
0 2017/06/17 09:48:59
Will get the wheels rerurbished soon
Will get the wheels rerurbished soon
0 2017/06/16 09:41:36
Wings nearly back on, bare metalled and treated then re painted, my mate has a body shop. £200 per side all in and done in 4 days. Need quick polish and final fit up then bumper back on. Have resisted a front mount intercooler for now.
Wings nearly back on, bare metalled and treated then re painted, my mate has a body shop. £200 per side all in and done in 4 days. Need quick polish and final fit up then bumper back on. Have resisted a front mount intercooler for now.
0 2017/06/16 09:41:25
0 2017/06/11 07:27:32
Fitted a Porsche approved lightweight battery to this Club Sport, weighed 5 kilos and had to make a new clamp for the battery, 10,500 miles from New in 1989, only about 30 came to U.K.. quite nervous working on it as just valued at £220k it is minty mint.
Fitted a Porsche approved lightweight battery to this Club Sport, weighed 5 kilos and had to make a new clamp for the battery, 10,500 miles from New in 1989, only about 30 came to U.K.. quite nervous working on it as just valued at £220k it is minty mint.
0 2017/06/11 07:27:25
Stone chipped the rear arches to tidy them up
Stone chipped the rear arches to tidy them up
0 2017/06/11 07:26:39
Ready for MK4 golf bellhousing other end now
Ready for MK4 golf bellhousing other end now
0 2017/06/11 07:24:59
0 2017/06/11 04:35:16
These will be counter sunk and next plate bolts up to this one.
These will be counter sunk and next plate bolts up to this one.
0 2017/06/11 04:35:09
0 2017/06/11 04:35:02
0 2017/06/10 10:06:44
0 2017/06/10 10:06:34
Full stainless pipe makes a nice deep noise
Full stainless pipe makes a nice deep noise
0 2017/06/10 10:06:24
Edge of wing. Will get it back to bare metal but need to check that the body shop I use knows how to work with Ally, he does a lot of vintage landies so he should be fine
Edge of wing. Will get it back to bare metal but need to check that the body shop I use knows how to work with Ally, he does a lot of vintage landies so he should be fine
0 2017/06/10 09:58:31
0 2017/06/10 09:58:23
Inside the edge of wing, there is seam sealer round it so this is what makes me think some of it is steel?
Inside the edge of wing, there is seam sealer round it so this is what makes me think some of it is steel?
0 2017/06/10 09:58:16
This is the bottom of an ally wing, I wonder if the last edge is steel? Will use a magnet on them, you can tell the wing is ally though as very light, I wonder if the steel has stuck to the ally as the edges of the wings are powdery ally.
This is the bottom of an ally wing, I wonder if the last edge is steel? Will use a magnet on them, you can tell the wing is ally though as very light, I wonder if the steel has stuck to the ally as the edges of the wings are powdery ally.
0 2017/06/10 09:58:10
Finally got the light out but took the whole bumper off anyway, I think whilst it is off I will replace the two tiny intercoolers with a nice front mount if I can buy one second hand or cheaply enough, just missed a Forge one at a breakers for £70. With decent intercooler, bigger injectors and higher fuel pressure they can be mapped to just over 300bhp with standard internals (bam engine code)
Finally got the light out but took the whole bumper off anyway, I think whilst it is off I will replace the two tiny intercoolers with a nice front mount if I can buy one second hand or cheaply enough, just missed a Forge one at a breakers for £70. With decent intercooler, bigger injectors and higher fuel pressure they can be mapped to just over 300bhp with standard internals (bam engine code)
0 2017/06/10 09:58:03
Bit of rust where wing meets body
Bit of rust where wing meets body
0 2017/06/10 09:57:51
These have been on a little while, rides very well and not firm at all.
These have been on a little while, rides very well and not firm at all.
0 2017/06/10 09:57:43
Treated the corrosion where the ally wing touches steel sill.
Treated the corrosion where the ally wing touches steel sill.
0 2017/06/10 09:57:36
0 2017/06/10 05:36:24
Another from the side on google images
Another from the side on google images
0 2017/06/07 13:48:58
You can see the front ones and the direction they go in.
You can see the front ones and the direction they go in.
0 2017/06/07 13:47:38
0 2017/06/05 10:56:44
Beam out and getting refurb
Beam out and getting refurb
0 2017/06/05 10:56:33
Torque tube
Torque tube
0 2017/06/05 10:56:21
Covered in crap, this is now all off
Covered in crap, this is now all off
0 2017/06/05 10:56:12
0 2017/06/05 10:37:54
"This side down" on the floor. Marks OCD is not as string as it used to be.
"This side down" on the floor. Marks OCD is not as string as it used to be.
0 2017/06/04 12:35:59
Lol at the floor, "this side down" pointing up....surprised Marks OCD didn't fire up.
Lol at the floor, "this side down" pointing up....surprised Marks OCD didn't fire up.
0 2017/06/04 12:34:25
0 2017/05/23 10:39:39
0 2017/05/23 10:39:36
0 2017/05/18 07:28:54
0 2017/05/18 07:28:44