Technical help Q & A Got A technical problem with you car? Keep it in here where the techies hang out and we will try to solve it for you!!

ford granada cosworth indicator problem

Thread Tools
 
Search this Thread
 
Old Feb 7, 2011 | 08:49 PM
  #1  
cardifftwilite1's Avatar
cardifftwilite1
Thread Starter
Virgin
 
Joined: Feb 2011
Posts: 8
Likes: 0
From: cardiff
Post ford granada cosworth indicator problem

hi, i have a Lreg grany, which im having problems with, the indicators, wont work, ive put a new stalk on, a new relay,which is on the stalk itself. hazards work fine, im at a loss, as to wot to try next?

Any help would be great!!!


thanks
Reply
Old Feb 8, 2011 | 07:26 AM
  #2  
tabetha's Avatar
tabetha
20K+ Super Poster.
 
Joined: Jul 2006
Posts: 24,596
Likes: 4
From: uk
Default

The fact that the hazzards work show the circuit is ok to the indicators, the power goes from a live source that is ignition switched to the indicator unit, so check there is a live at the indicator unit, this then goes out the indicator unit to the stalk, where it stops, as it is a dead end circuit, unless the stalk is put to left or right, where current will flow to the lights on that side, this causes a bi metallic strip to heat up, as it passes the current, it gets hot and bends away from the contact so breaking the circuit, it cools bends back and touches the contact again, passes current and the lights are on again.
This is how you get the on off, so check for power at the indicator relay from ignition then power out etc.
tabetha
Reply
Old Feb 8, 2011 | 07:43 AM
  #3  
dojj's Avatar
dojj
Resident Wrestling Legend
20 Year Member
Liked
Loved
Community Favorite
iTrader: (3)
 
Joined: May 2003
Posts: 50,018
Likes: 259
From: Little India
Default

the hazzard lights work on the flasher relay

you will find that the most likely problem is the fuse for the indicators or the fuse box itself getting wet
Reply
Old Feb 8, 2011 | 08:29 AM
  #4  
cardifftwilite1's Avatar
cardifftwilite1
Thread Starter
Virgin
 
Joined: Feb 2011
Posts: 8
Likes: 0
From: cardiff
Post indicator probs

hi, thanks for reply, ive checked the fuses, as far as i can see they are all fine in both fuse boxes, although im 100% sure as to which the correct fuse is, as i dont have the manual!!!!

thanks
Reply
Old Feb 8, 2011 | 08:47 AM
  #5  
dojj's Avatar
dojj
Resident Wrestling Legend
20 Year Member
Liked
Loved
Community Favorite
iTrader: (3)
 
Joined: May 2003
Posts: 50,018
Likes: 259
From: Little India
Default

the insides of the covers will tell you

change them anyway as i had a dodgy fuse once that no end of problem solving didn't turn up until we pulled it apart and you could see that there was a small crack in the joint so it was hit and miss it it worked or not
Reply
Old Feb 8, 2011 | 09:05 AM
  #6  
cardifftwilite1's Avatar
cardifftwilite1
Thread Starter
Virgin
 
Joined: Feb 2011
Posts: 8
Likes: 0
From: cardiff
Default

Originally Posted by dojj
the insides of the covers will tell you

change them anyway as i had a dodgy fuse once that no end of problem solving didn't turn up until we pulled it apart and you could see that there was a small crack in the joint so it was hit and miss it it worked or not
hi again, all the covers have on them are the fuse numbers!!!!!

thanks
Reply
Old Feb 8, 2011 | 09:51 AM
  #7  
dojj's Avatar
dojj
Resident Wrestling Legend
20 Year Member
Liked
Loved
Community Favorite
iTrader: (3)
 
Joined: May 2003
Posts: 50,018
Likes: 259
From: Little India
Default

fuse 27 on the drivers side and fuse 45 on the passenger side is all that i can find as there doesn't seem to be a seperate feed for them, unless you can deciper connection C and E in the central fuse board which is what seems to feed the indicators
Reply

Trending Topics

Old Feb 8, 2011 | 02:08 PM
  #8  
cardifftwilite1's Avatar
cardifftwilite1
Thread Starter
Virgin
 
Joined: Feb 2011
Posts: 8
Likes: 0
From: cardiff
Post

Originally Posted by dojj
fuse 27 on the drivers side and fuse 45 on the passenger side is all that i can find as there doesn't seem to be a seperate feed for them, unless you can deciper connection C and E in the central fuse board which is what seems to feed the indicators


ok, thanks for advice, will change the fuses and c wot happen`s
thanks again
will let you no of the outcome
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
dodge8283
General Car Related Discussion.
27
Aug 19, 2015 08:42 AM
Focosmitch
Ford RS Cosworth Parts for Sale
2
Aug 14, 2015 07:29 AM
RIB1122
Ford RS Cosworth Parts for Sale
0
Aug 12, 2015 08:51 PM
dlwarrior
Technical help Q & A
3
Aug 5, 2015 10:19 AM




All times are GMT. The time now is 02:42 PM.