Mk2 Fiesta ST 170
#1
I've found that life I needed.. It's HERE!!
Thread Starter
Mk2 Fiesta ST 170
Some pictures of my sons Fiesta. We've had this for 7 years now first it belonged to son no. 1 who modified from a standard car to how it is today. It's now owned by son no. 2 and is still running a 1.1 but he's been gathering parts and maybe it will get the power to match its looks soon.
Last edited by boost monster; 26-10-2018 at 01:24 PM. Reason: New topic
#3
Advanced PassionFord User
Really nice that is.
#4
PassionFord Post Whore!!
Looks well
Trending Topics
#8
I've found that life I needed.. It's HERE!!
Thread Starter
Yea plate cost a bit. Engine has arrived but it will be a few months before it's fitted.
#10
10K+ Poster!!
Nice looking car
#12
I've found that life I needed.. It's HERE!!
Thread Starter
Thanks for the positive comments it certainly gets plenty attention when it's out and about
Here's the plan
This is the fourth engine that has been bought to go in it so hopefully this time.
Here's the plan
This is the fourth engine that has been bought to go in it so hopefully this time.
#16
I've found that life I needed.. It's HERE!!
Thread Starter
Mk2 Fiesta ST 170
A little progress Engine cleaned and painted got to be worth 20 bhp and a shiny new flywheel Gearbox rebuild with RST LSD is next
Last edited by boost monster; 19-02-2018 at 08:37 AM. Reason: New engine
#18
Advanced PassionFord User
I really like your car, and motor plans well done.
#20
I've found that life I needed.. It's HERE!!
Thread Starter
#22
I've found that life I needed.. It's HERE!!
Thread Starter
The following users liked this post:
boost monster (04-03-2018)
#24
I've found that life I needed.. It's HERE!!
Thread Starter
A little progress. Inlet manifold from dan st engineering and ecu have been purchased.
#25
10K+ Poster!!
Why not run the standard injection?
#26
I've found that life I needed.. It's HERE!!
Thread Starter
#28
I've found that life I needed.. It's HERE!!
Thread Starter
The carbs and manifold. Also got a alternator bracket and engine mount.
#29
Advanced PassionFord User
Oh that looks lush, bet it will sound awesome
#31
I've found that life I needed.. It's HERE!!
Thread Starter
He is trying to keep the belt covers and they need a little work the clear the engine mount, nearly there.
He decided to make a bracket to suit the small alternator he has. Gearbox and lsd were dropped of at the repair shop on Friday.
He decided to make a bracket to suit the small alternator he has. Gearbox and lsd were dropped of at the repair shop on Friday.
#32
I've found that life I needed.. It's HERE!!
Thread Starter
Well yesterday the biggest piece off the plan came. We finally got a garage to do the work, it’s been with solicitors since October but now mine. So full steam ahead.
#33
Advanced PassionFord User
Brilliant news, and looking good already.
#35
I've found that life I needed.. It's HERE!!
Thread Starter
I can confirm that waxoyl goes on easier than it comes off
Anybody need a 52k 1.1 engine.
#38
I've found that life I needed.. It's HERE!!
Thread Starter
To escape the boredom of waxoyl cleaning he tried his 285 mm discs and 4 pots to see if they would fit behind the 13” wheels. Looks tight but doable.👍
#40
I've found that life I needed.. It's HERE!!
Thread Starter
They are wilwood 4 pots and will be on brackets made by my son ( mdf) prototyping is happening now! I think the discs are from a 4x4 Sierra and they have the correct offset.
He has a Mondeo servo and master cyclinder.
He has a Mondeo servo and master cyclinder.