Series 1 4x4 cosworth
#962
#980
.
Quick question, what are you doing for a cover over the heater blower mate, I'm having a bit of a mare with mine. Saying that my blower looks about an inch or more higher than yours. Have you shortened the arms on the wipers (the ones that point down, not the one that joins the 2 together) I've had to take 20mm out of mine just to clear the plug on top of the blowers.
Ginger
.
Quick question, what are you doing for a cover over the heater blower mate, I'm having a bit of a mare with mine. Saying that my blower looks about an inch or more higher than yours. Have you shortened the arms on the wipers (the ones that point down, not the one that joins the 2 together) I've had to take 20mm out of mine just to clear the plug on top of the blowers.
Ginger
.
#981
Thread Starter
Series 1 4x4 cossie
iTrader: (1)
Joined: Mar 2008
Posts: 2,925
Likes: 43
From: Bonnie Scotland !! Or offshore in Africa!!!!
.
Quick question, what are you doing for a cover over the heater blower mate, I'm having a bit of a mare with mine. Saying that my blower looks about an inch or more higher than yours. Have you shortened the arms on the wipers (the ones that point down, not the one that joins the 2 together) I've had to take 20mm out of mine just to clear the plug on top of the blowers.
Ginger
.
Quick question, what are you doing for a cover over the heater blower mate, I'm having a bit of a mare with mine. Saying that my blower looks about an inch or more higher than yours. Have you shortened the arms on the wipers (the ones that point down, not the one that joins the 2 together) I've had to take 20mm out of mine just to clear the plug on top of the blowers.
Ginger
.
#983
.
Thats what i've had to do, i had another look after my last post and I've defo fitted the floor etc higher up in the car, my strut tops are a good inch higher than Cutch's. I started dismattling the the blower so i can make a cardboard template cover, goona be a tight fit :-(
Do you know if doberman has pics of his on his thread???
Ginger
P.S. Cars look amazing Cutch
.
Thats what i've had to do, i had another look after my last post and I've defo fitted the floor etc higher up in the car, my strut tops are a good inch higher than Cutch's. I started dismattling the the blower so i can make a cardboard template cover, goona be a tight fit :-(
Do you know if doberman has pics of his on his thread???
Ginger
P.S. Cars look amazing Cutch
.
Last edited by GINGExR2 T; 28-04-2012 at 08:24 AM.
#986
Thread Starter
Series 1 4x4 cossie
iTrader: (1)
Joined: Mar 2008
Posts: 2,925
Likes: 43
From: Bonnie Scotland !! Or offshore in Africa!!!!
Right finally got back onto the car today after having to go into hospital to get my knee operated on! Not a nice experience but it seems to be fixed...
Started puting the interior into the car, got the carpet in and cut the middle section out to make it fit!
Put the rear seat in and seat belts
And i could only get the passenger side in as I can only find that sides modified runners!
Now I am missing interior C pillars, B pillars are broken, interior door sills, and inside window scrapers.
Started puting the interior into the car, got the carpet in and cut the middle section out to make it fit!
Put the rear seat in and seat belts
And i could only get the passenger side in as I can only find that sides modified runners!
Now I am missing interior C pillars, B pillars are broken, interior door sills, and inside window scrapers.
#991
Thread Starter
Series 1 4x4 cossie
iTrader: (1)
Joined: Mar 2008
Posts: 2,925
Likes: 43
From: Bonnie Scotland !! Or offshore in Africa!!!!
Well thanks to RSmatt for sending me some hose and Carlo for offering too i managed to get my breather done,
Made up a template for the bracket,
Cut out and painted up,
On inner wing
Breather on with hoses, the one ontop of the rocker cover is going to be replaced with one from Roose so that i get a nice 90 deg bend in it and the correct id at both ends. But the one i was struggling with was fixed with Matts donation!
Strut brace lying ontop,
Now going out to do the heatshield.
Made up a template for the bracket,
Cut out and painted up,
On inner wing
Breather on with hoses, the one ontop of the rocker cover is going to be replaced with one from Roose so that i get a nice 90 deg bend in it and the correct id at both ends. But the one i was struggling with was fixed with Matts donation!
Strut brace lying ontop,
Now going out to do the heatshield.
#994
Thread Starter
Series 1 4x4 cossie
iTrader: (1)
Joined: Mar 2008
Posts: 2,925
Likes: 43
From: Bonnie Scotland !! Or offshore in Africa!!!!
yes mate, i wrote above the pic that i am getting one made up with a 90 deg in it, going to have roose? make me one for my petrol tank, intercooler with dump valve and the rocker cover breather. just put it on to see it on
Last edited by cutch; 06-05-2012 at 04:45 PM.
#997
Thread Starter
Series 1 4x4 cossie
iTrader: (1)
Joined: Mar 2008
Posts: 2,925
Likes: 43
From: Bonnie Scotland !! Or offshore in Africa!!!!
Heatshield template made,
And after god knows how many times in and out!
Think i did ok for my first time!
And now my engine bay should be nearly finished...
Tomorrow sort out something on the wipers, prime the power steering and bolt down the fuse box.
And after god knows how many times in and out!
Think i did ok for my first time!
And now my engine bay should be nearly finished...
Tomorrow sort out something on the wipers, prime the power steering and bolt down the fuse box.
#999
You know once you have finished your going to get really bored with it after a few weeks ..........................
Then you may want to swap it for a 3 door ???
Bloody great effort and a work of art,id love to have this sitting in my garage
Then you may want to swap it for a 3 door ???
Bloody great effort and a work of art,id love to have this sitting in my garage