BEEFY'S s1 cos- tues 1-5-2012 Project now for sale , breaking -
#3161
nice mate !!
got a txt off the missus at work today - this arrived
its my 9 x 18 in mock up wheel , i won it on the bay in the correct 5x112 pcd for my hubs
225-35-18 on it aswell so perfect size tyre double result ,
lol the listing had it as a compomotive mo - pleasantly surprised to open the wrapping to find its actually a raceline rl7 lol- may keep my eyes peeled for the other three lol
also popped into my local hose and hydraulics place
des the owners orderd the required metric to jic fittings i need for the block and water pump
should be here tomorrow eve and for £8 for 4 fittings im quite pleased
got a txt off the missus at work today - this arrived
its my 9 x 18 in mock up wheel , i won it on the bay in the correct 5x112 pcd for my hubs
225-35-18 on it aswell so perfect size tyre double result ,
lol the listing had it as a compomotive mo - pleasantly surprised to open the wrapping to find its actually a raceline rl7 lol- may keep my eyes peeled for the other three lol
also popped into my local hose and hydraulics place
des the owners orderd the required metric to jic fittings i need for the block and water pump
should be here tomorrow eve and for £8 for 4 fittings im quite pleased
Last edited by -beefy-; 29-03-2011 at 04:49 PM.
#3162
sit boo boo sit
iTrader: (4)
nice mate !!
got a txt off the missus at work today - this arrived
its my 9 x 18 in mock up wheel , i won it on the bay in the correct 5x112 pcd for my hubs
225-35-18 on it aswell so perfect size tyre double result ,
lol the listing had it as a compomotive mo - pleasantly surprised to open the wrapping to find its actually a raceline rl7 lol- may keep my eyes peeled for the other three lol
also popped into my local hose and hydraulics place
des the owners orderd the required metric to jic fittings i need for the block and water pump
should be here tomorrow eve and for £8 for 4 fittings im quite pleased
got a txt off the missus at work today - this arrived
its my 9 x 18 in mock up wheel , i won it on the bay in the correct 5x112 pcd for my hubs
225-35-18 on it aswell so perfect size tyre double result ,
lol the listing had it as a compomotive mo - pleasantly surprised to open the wrapping to find its actually a raceline rl7 lol- may keep my eyes peeled for the other three lol
also popped into my local hose and hydraulics place
des the owners orderd the required metric to jic fittings i need for the block and water pump
should be here tomorrow eve and for £8 for 4 fittings im quite pleased
Though it looks nowt like a welding mask....Lol..
Dya get me message re valves old boy?
#3174
PassionFord Post Whore!!
iTrader: (1)
ta mate thats what we did in the end !
ta mucka
steve im assuming its a breather mate , it came fitted in the sump , i think ill drop stu a pm re it , the original return is still on the other side ,
worst worst case i have to remove the sump and weld / fit a return ,
will boil down to what setup i use i guess ,
told you fella - i like my cossie one lol ,
will be in touch for a bottom pulley , verniers
will do son
thanks mate ,
cheers for the comments peeps
ta mucka
steve im assuming its a breather mate , it came fitted in the sump , i think ill drop stu a pm re it , the original return is still on the other side ,
worst worst case i have to remove the sump and weld / fit a return ,
will boil down to what setup i use i guess ,
told you fella - i like my cossie one lol ,
will be in touch for a bottom pulley , verniers
will do son
thanks mate ,
cheers for the comments peeps
this is mine now fitted with a 45 degree bend to clear the starter
steve
Last edited by The Youth.; 29-03-2011 at 08:34 PM.
#3176
picked these up eairler
my metric and npt to jic adapters
from
really really helpful bunch of lads in there , if anyone needs anything pop in or call and ask for des , tell him beef sent ya
even gave me a cool little conversion chart to help me work out whent i need in future
got a few copies if anyone needs one
so m22 to -10
m16 to -8
there loose fitted , also got a 3/8npt to - 10 for the back of the block , but dont have a spanner at the new house to fit the adapter / fitting tonight think im going to swap out the straight -10 in the sump to a 45 deg i have here , and then use that on the bk of block
beef
my metric and npt to jic adapters
from
really really helpful bunch of lads in there , if anyone needs anything pop in or call and ask for des , tell him beef sent ya
even gave me a cool little conversion chart to help me work out whent i need in future
got a few copies if anyone needs one
so m22 to -10
m16 to -8
there loose fitted , also got a 3/8npt to - 10 for the back of the block , but dont have a spanner at the new house to fit the adapter / fitting tonight think im going to swap out the straight -10 in the sump to a 45 deg i have here , and then use that on the bk of block
beef
Last edited by -beefy-; 30-03-2011 at 05:39 PM.
#3196
she read it mate , more pissed about how she looks in the pic lol
i get no chew from the missus when it comes to the car mate she really is one in a million
how many women would let you plonk ya engine on a 3 week old front room carpet ?
i think pillow talk tonight will be what inlet and turbo to put on the sides of it !!
#3199
Too many posts.. I need a life!!
Absolutely stunning do you fancy doing mine......