My 397BHP Zetec Turbo 3dr. Its over...
29-06-2008, 08:30 PM
#965
lol cheers rab, i need to swap a couple of those connectors as i bought too many big ones, and need another 2 os the smaller 90 degree bends, then with them all in place i can measure up how much hose i need. will try to do this tomoz if i finish work early enough.
the front end doesnt look toooooo bad in person, but it needs a 500 splitter, thats for sure!
the front end doesnt look toooooo bad in person, but it needs a 500 splitter, thats for sure!
29-06-2008, 08:37 PM
#966
Fucking superstar........
Join Date: May 2004
Location: Argyll.... It's lonely...
Posts: 13,240
Likes: 0
Received 0 Likes
on
0 Posts
04-07-2008, 08:59 PM
#969
it is a nice shirt isnt it!
right, went back to pirtek yesterday and got the last few fittings, and went in today to buy some ptfe lined hose... 10 metres of the stuff... only to be told they didnt have enough in stok and will order it for tuesday
FFS lol
looking at a good Ł150 for the hose and ferrels i guess, but at least they crimp em for free
so hopefully by next weekend all the plumbing in will be done
well mostly, i need to sort out the fuel pump/filter fittings...
right, went back to pirtek yesterday and got the last few fittings, and went in today to buy some ptfe lined hose... 10 metres of the stuff... only to be told they didnt have enough in stok and will order it for tuesday
FFS lol
looking at a good Ł150 for the hose and ferrels i guess, but at least they crimp em for free
so hopefully by next weekend all the plumbing in will be done
well mostly, i need to sort out the fuel pump/filter fittings...
10-07-2008, 03:42 PM
#971
Too many posts.. I need a life!!
Join Date: Nov 2005
Location: ...
Posts: 854
Likes: 0
Received 0 Likes
on
0 Posts
Common mate finger out need to make it to RS Day 09 under its own steam lol
Looking awesome mate if you get time i would search for a genuine 3 door bumper to finish it off
Looking awesome mate if you get time i would search for a genuine 3 door bumper to finish it off
12-07-2008, 04:54 AM
#975
PassionFord Post Troll
dan i seriously think out of the whole resto section i want to see yours on the road the most!! just been through the whole thing again looks awsome, the bad boy grills even growing on me a little!!
12-07-2008, 09:42 PM
#978
just finished doing the fuel, water and oil hoses!!
i just need to take them all off again and take them to have the ferrels crimped on
overall shot
bolted the FPR to the inner wing
oil breather and water hose, i decided that as the car will hardly be used, i have binned off the heater/fan blowers. doing this has made it much easier to plumb in, and also gives me space to mount the coilpack
in the boot - obviously i need to tidy up the hose runs, but this will be done once its all crimped
fuel tank fittings
tank vent going up to roof
i also need to get the fittings for the fuel pump and filter, i bought the pump to tank adaptor from pj motorsport last sat, but its still not been delivered yet...
also need to get a length of larger diameter hose from tank to pump. and then get a fitting from filter tot he hose you see there... oh, and the bajos to join the filter and pump lol
and finally, i made a start on the carbon dial surround for the stack ST700SR (right) and boost gauge (left) with an ACT guage in the upper middle and the idiot lights in the lower middle.
the 80mm hole has since been cut out, but no pics lol
i just need to take them all off again and take them to have the ferrels crimped on
overall shot
bolted the FPR to the inner wing
oil breather and water hose, i decided that as the car will hardly be used, i have binned off the heater/fan blowers. doing this has made it much easier to plumb in, and also gives me space to mount the coilpack
in the boot - obviously i need to tidy up the hose runs, but this will be done once its all crimped
fuel tank fittings
tank vent going up to roof
i also need to get the fittings for the fuel pump and filter, i bought the pump to tank adaptor from pj motorsport last sat, but its still not been delivered yet...
also need to get a length of larger diameter hose from tank to pump. and then get a fitting from filter tot he hose you see there... oh, and the bajos to join the filter and pump lol
and finally, i made a start on the carbon dial surround for the stack ST700SR (right) and boost gauge (left) with an ACT guage in the upper middle and the idiot lights in the lower middle.
the 80mm hole has since been cut out, but no pics lol
13-07-2008, 08:34 PM
#986
thats where most people vent them to, just up high in the car.
the black hose going from the rad to the header tank you mean? its supposed to lol. the breather is the tank next to the header with the orange caps on
all hose and fittings are from pirtek
http://www.pirtek.co.uk/
15-07-2008, 10:36 AM
#994
Boost Junkie
Long time no see Dan. Nice to see the build is coming along. I try and keep up with all the updates and yes im always lurking around here lol. Only 180 posts in 4 years lol
Even though im an impreza owner now i cant keep away for the RS's long. Im always pining for another cossie lol.
Hope youre doing well.
Keep up the good work
Even though im an impreza owner now i cant keep away for the RS's long. Im always pining for another cossie lol.
Hope youre doing well.
Keep up the good work
15-07-2008, 09:04 PM
#995
cheers everyone
got most of the fuel hoses crimped up ready to fit today, all except the long ones through the car as i still need to sort out the pump/filter fittings. looks much better now.
didnt get the black rubber hoses done either as i had to order some fireproof sleeve, and they have to fit that before the ferrels are crimped on.
frayz, bloody hell man, it has been a long time!!! probably a good 3 years i reckon! hope your doing well, and its good to hear from you!!
got most of the fuel hoses crimped up ready to fit today, all except the long ones through the car as i still need to sort out the pump/filter fittings. looks much better now.
didnt get the black rubber hoses done either as i had to order some fireproof sleeve, and they have to fit that before the ferrels are crimped on.
frayz, bloody hell man, it has been a long time!!! probably a good 3 years i reckon! hope your doing well, and its good to hear from you!!
