My 397BHP Zetec Turbo 3dr. Its over...
well, thought it was about time i started a resto thread lol afterall, i have had the car 8 months lol :top:
so here goes i bought the car off Steve (itsmeagain) last August i think it was, its a beastly 1.6GL with 65K on the clock! proppa low miles and the bodywork is in VERY good condition. so here a few pics lol im loving the numberplate :cry: its the bollocks :cry: :cry: :top: https://img.photobucket.com/albums/v...geass/3dr3.jpg https://img.photobucket.com/albums/v...geass/3dr2.jpg https://img.photobucket.com/albums/v...geass/3dr1.jpg |
Should be a very good project mate if all goes to plan :cool: :top:
|
the plan was to totally strip and cage the car so it can be used as atrack car along with a show car for the FF stands at the shows, so it didnt stay like that for long, i stripped the complete interior out while lining it up for a cage and ended up driving it like this for a month or three :cry:
it was quite funny tho, as when i removed the foam from the rear wheel arches, it seems a mouse or something has been lunchin on it for a while as there were big holes chewed through stuff :cry: https://img.photobucket.com/albums/v...dgeass/int.jpg just the sound deadening alone weighed in at 11KG :eek: |
Originally Posted by D19 STE
Should be a very good project mate if all goes to plan :cool: :top:
ill keep adding updates as i go, its already had a fir of stuff done now but no point bangin it all up straight away :cry: :top: |
seen this in fast ford. looks like a great project. would love to do one myself. you already have a lot of parts for it dont you? get more pics up, ie with the cage etc.
know what you mean about the sound deadening. I've stripped my series 1 and the sound deadening weighed a ton. :top: |
yeah i have got a lot stuff for it now mate, soon after buying the car i bought full 2wd cossie running gear minus T5 and prop off pugo, a T34 which turns out to have a maram shaft and some body kit stuff.
i also blagged me a set of AVO Monotube coil overs too :top: std height :cry: https://img.photobucket.com/albums/v...s/100_1699.jpg https://img.photobucket.com/albums/v...s/100_1700.jpg AVO's :cool: https://img.photobucket.com/albums/v...s/100_1701.jpg https://img.photobucket.com/albums/v...s/100_1702.jpg https://img.photobucket.com/albums/v...s/100_1703.jpg how low :cry: yup, thats fuck all :cry: :cry: :cry: :top: https://img.photobucket.com/albums/v...s/100_1704.jpg after :cry: :top: https://img.photobucket.com/albums/v...s/100_1705.jpg |
Car looks bloody clean in the first few picks until you got your hands on it! :DD:
If you think the sound deadning was heavy, wait til you get some poly windows in there. You will be suprised at the weight of the glass. Try opening the tailgate / boot with out the gas struts on!!! You need to be He bloody man. I can rest cols fibreglas / poly replacement on my head while i while i fill up the fuel cell! |
lol i swapped the tail gates this weekend mate, its now got a nice white one on with a RS500 spoiler, done it on my own and it was a reeeeeeeeeet cuuuuuuuunt :cry:
|
Liked your little updates in fast ford mate, luv this project. Looks quality slammed!
whats the engine spec gonna be or is that top secret? :top: :clap: :clap: :clap: :clap: |
cheers mate :top:
no my engine isnt top secret, im NOT one of those ghays that doesnt like people copying... anyway, spec is: 2.0l silver top Zetec +0.5mm Wiseco forged pistons Carrillo steel rods std crank Specialized engine ported/polished/big valve head cams?? dunno yet, most likey std 2.0l spec Primary Designs tubular manifold T34 with .63 zorst housing and Maram shaft - ALS! :cool: Titan motorsport roller barrel throttles, with one off plenum being made 650cc injectors (not got em yet) SECS S8 management SECS fly-by-wire throttle contol (possibly lol) one off flywheel from doug (Garage19) so can fit a T5 box and cossie clutch to the zetec :cool: Helix organic clutch aim is 400bhp, so that means running the T34 at about 32psi lol :top: :cry: think thats it :top: |
Didnt know this used to be Steves monster.
Looks good Dan cant wait to see it in its beastly sprayed state. Need to get myself this months ff. |
Originally Posted by fudgeass
cheers mate :top:
no my engine isnt top secret, im one of those ghays that doesnt like people copying... anyway, spec is: 2.0l silver top Zetec +0.5mm Wiseco forged pistons Carrillo steel rods std crank Specialized engine ported/polished/big valve head cams?? dunno yet, most likey std 2.0l spec Primary Designs tubular manifold T34 with .63 zorst housing and Maram shaft - ALS! :cool: Titan motorsport roller barrel throttles, with one off plenum being made 650cc injectors (not got em yet) SECS S8 management SECS fly-by-wire throttle contol (possibly lol) one off flywheel from doug (Garage19) so can fit a T5 box and cossie clutch to the zetec :cool: Helix organic clutch aim is 400bhp, so that means running the T34 at about 32psi lol :top: :cry: think thats it :top: 32psi foooooooooooooooooooooooooooooook me. |
really nice, it looks mad slammed, keep us updated on his baby
|
Goona look mental mate! Get the rest of the pics up you fuckin pussy! ;) :cry: :cry: :cry: :cry: :cry: :cry:
Oh, and has the Mrs caught you drifting in it again yet!? :eek: :cry: ;) |
thats wel clean, and should look the bollocks wen dun.
youd better get a move on, just bought FF mag an someone else is buildin 1. chop chop! |
love this project :top:
|
Originally Posted by pratley
thats wel clean, and should look the bollocks wen dun.
youd better get a move on, just bought FF mag an someone else is buildin 1. chop chop! |
:top: :top: :top: Nice M8 and different with that engine in it :clap: :clap: :clap:
As said get some pics up with the cage in. looked good in the mag while they were trial fitting everything up :cool: :cool: Keep the updates coming :D Paul. |
Amazing something that looks pretty turd was transformed, by Ford, into cars such as the 3dr Cosworth and RS500 isn't it? Here's hoping you do just as successful a job, but with modern 16v power! Good luck with it! :top:
|
Love it mate :)
|
Originally Posted by jhw
Originally Posted by fudgeass
cheers mate :top:
no my engine isnt top secret, im one of those ghays that doesnt like people copying... anyway, spec is: 2.0l silver top Zetec +0.5mm Wiseco forged pistons Carrillo steel rods std crank Specialized engine ported/polished/big valve head cams?? dunno yet, most likey std 2.0l spec Primary Designs tubular manifold T34 with .63 zorst housing and Maram shaft - ALS! :cool: Titan motorsport roller barrel throttles, with one off plenum being made 650cc injectors (not got em yet) SECS S8 management SECS fly-by-wire throttle contol (possibly lol) one off flywheel from doug (Garage19) so can fit a T5 box and cossie clutch to the zetec :cool: Helix organic clutch aim is 400bhp, so that means running the T34 at about 32psi lol :top: :cry: think thats it :top: 32psi foooooooooooooooooooooooooooooook me. cheers for the comments guys, Pratley is right, Colin Stannard (Garage19's mate) has stolen my idea and is building onetoo, but hes minted so can afford to just lob cashe everywhere, like the £3k zoo rear beam :cry: his bottom end is now all build up so im thnking that his is gonna be running before mine unfortunatly... the C OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO NT :cry: nah, good luck to ya Colin :top: |
heres some pics of the cage :cry: (BIG THANKS TO CAGED AT WESTBURY :cry: www.therollcagepeople.co.uk)
ghay :gay: https://img.photobucket.com/albums/v...geass/gimp.jpg trial fitting and stuff before welding and painting https://img.photobucket.com/albums/v...ss/harness.jpg https://img.photobucket.com/albums/v...ss/doorbar.jpg https://img.photobucket.com/albums/v...geass/rear.jpg and the thing in all painted up :top: https://img.photobucket.com/albums/v...eass/cage1.jpg https://img.photobucket.com/albums/v...eass/cage5.jpg https://img.photobucket.com/albums/v...eass/cage3.jpg https://img.photobucket.com/albums/v...eass/cage2.jpg flocked dash from Doug (Garage19) :top: https://img.photobucket.com/albums/v...eass/dash2.jpg https://img.photobucket.com/albums/v...eass/dash1.jpg and thats your lot for now lol |
:clap: :clap: :clap: :clap: :cool: :cool: :cool:
|
Looking good Dan :clap: :top:
|
:cool: cheers guys.
about to go and fit the front bumper (fibreglass rep :cry: ) and its pissing down... i put the whale tail and rear bumper on at the weekend, but no pics. it looks really good now :cry: :top: |
:top: :top: :top:
|
Originally Posted by fudgeass
Originally Posted by jhw
Originally Posted by fudgeass
cheers mate :top:
no my engine isnt top secret, im one of those ghays that doesnt like people copying... anyway, spec is: 2.0l silver top Zetec +0.5mm Wiseco forged pistons Carrillo steel rods std crank Specialized engine ported/polished/big valve head cams?? dunno yet, most likey std 2.0l spec Primary Designs tubular manifold T34 with .63 zorst housing and Maram shaft - ALS! :cool: Titan motorsport roller barrel throttles, with one off plenum being made 650cc injectors (not got em yet) SECS S8 management SECS fly-by-wire throttle contol (possibly lol) one off flywheel from doug (Garage19) so can fit a T5 box and cossie clutch to the zetec :cool: Helix organic clutch aim is 400bhp, so that means running the T34 at about 32psi lol :top: :cry: think thats it :top: 32psi foooooooooooooooooooooooooooooook me. cheers for the comments guys, Pratley is right, Colin Stannard (Garage19's mate) has stolen my idea and is building onetoo, but hes minted so can afford to just lob cashe everywhere, like the £3k zoo rear beam :cry: his bottom end is now all build up so im thnking that his is gonna be running before mine unfortunatly... the C OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO NT :cry: nah, good luck to ya Colin :top: You gotta give money bags his due, he has fabricated alot of custom parts himself, engine is built at home, so are inlet, and tubular manifold, engine mounts etc and engine will be home mapped. He just has the expendable income to spend on good components. Bastid :cry: Why did i ever move out, get married etc... :cry: |
and me mate, women eh :cry: :cry: :cry:
ps get col to knock up some more mounts, ill buy him a pint (or 3) :top: |
looks like we live quite close to each other :top:
|
Originally Posted by sidewayz
looks like we live quite close to each other :top:
ive only seen 2 white rst's round here, one is paul palmer and i dunno who the other one is not seen any red uns about tho |
Yep, used to be my car.
I bought this car, not for any real reason actually, was just driving through the countryside and saw it by side of the road :cry: I reversed back up to have a look and it was soooooooooo mint it was crazy, so i knocked on a few doors to find out whos it was n try n buy it off em :cry: Massive book of history n allsorts. I bought it, drove it home, and only drove it once after that IIRC, and that was down to work to sell it to Dan :cry: :top: I couldve sold it for loads as its stupidly good nick, but as Dan was gonna do a quality project id rather jus sell it to a mate who was gonna give it a good home. Glad its gone to a good home as i didnt know what to do with it, was just toooooo mint not to snap up when i saw it :top: Gonna be the bollocks when its done :top: |
Looks really clean
:top: |
looks good :top: can we have just one pic of it from outside now :D please
|
you asked for it :cry:
and no, the drivers side bit of bumper isnt on properly yet as it was pissing down and i needed to get under the car to drill some holes :cry: i think it looks rather fetching on the steelies, especially with the indicator bulbs selotaped to the grill :cry: :cry: :cry: https://img.photobucket.com/albums/v...s/100_1851.jpg |
:cry:
Careful that don't end up on BarryBoys Be really smart when it's done :top: |
:top: :top: cool thread, lol @ that last pic, should be awesome when its finnished wat colour u going for?
|
cant say colour yet, as its top secret :cry:
hopefully the next time its driven is down to the bodyshop :cry: it turns heads i tell thee, and its low as fuck with that bumper on :cry: |
I posted this on Retro Rides and look what i got :cry:
http://retrorides.proboards29.com/in...0618521&page=8 |
i know the colour :blabla: im still not sure on that cage, had i had more time it would have looked better :wall:
|
whats worng with the cage dan?
looks spot on to me? |
All times are GMT. The time now is 09:47 AM. |
© 2024 MH Sub I, LLC dba Internet Brands