Heater problem.
Thread Starter
Wahay!! I've lost my Virginity!!
Joined: May 2010
Posts: 89
Likes: 4
From: washington tyne & wear
Can anybody give me inform on a problem I have with my car hearter. It work hot and cold But the last couple of days,. ONLY works on No.4.can anybody help (inform) Paul.
Last edited by focus on ford; Oct 7, 2019 at 05:12 PM.
Hi a new switch is often needed if you wiggle or push the switch and flick between 1.2.3. it may work for a moment, and identify your faulty part,
Trending Topics
Just as GVK says, the resistor is on the heater box, it has some wires going in to it and is held in by a screw, if you remove the wiring clip and the screw the resistor should come right out. You put the new one in, screw it on, clip on the wiring and test for proper operation of the blower motor. Good luck with it and let us know how you get on
Thread Starter
Wahay!! I've lost my Virginity!!
Joined: May 2010
Posts: 89
Likes: 4
From: washington tyne & wear
Focus 02, some of the members have said what it could be. Just have not getting around to get the part just now. But it will not wait, it is going to have to be done ASAP Paul.
Thread Starter
Wahay!! I've lost my Virginity!!
Joined: May 2010
Posts: 89
Likes: 4
From: washington tyne & wear
Thanks, I just need to get one then fit it. Just the sellers on ebay don't have good rating, so will have to visit the scrap yard I think thanks for you help Paul.
Thread Starter
Wahay!! I've lost my Virginity!!
Joined: May 2010
Posts: 89
Likes: 4
From: washington tyne & wear
Just like to say BIG thank you, to the members of the group. For the help they give with this problem. The instrucations, that you all give was spot on. helped me solve the problem, with my heating Thanks Paul.
Thread
Thread Starter
Forum
Replies
Last Post
MATCOS
Alternate Car Brands (Non Ford)
5
Feb 25, 2006 03:11 PM
MATCOS
General Car Related Discussion.
6
Feb 1, 2006 02:27 PM








