F1 Spec????
#121
But the Schmitthelm springs, like SBS mentioned, are extremely good quality springs, its a good choice of part, overkill for most YB's but certainly there is NOTHING wrong with them.
You are taking people's replies out of context if you think people are saying they are "shit", no one is saying that.
ok i get annoyed quickly but im not going to sit there and take shit but i will stop getting back at ppl about thier engines
#122
Decent of you to admit it Danny,
I think people are splitting hairs over a simple term "Historic" and "Current" one implies it is happening now the other that it was used in the past,
Me personally l think to say it is F1 spec is aload of tosh as the first thing l would do as a customer is quiz you on it as a point but thats just me,
With regards Joe l guess what you are saying is he is heavily involved in the support and maintence of older F1q engines, again to split hairs on how old it has to be to be considered old is crazy
Mike
I think people are splitting hairs over a simple term "Historic" and "Current" one implies it is happening now the other that it was used in the past,
Me personally l think to say it is F1 spec is aload of tosh as the first thing l would do as a customer is quiz you on it as a point but thats just me,
With regards Joe l guess what you are saying is he is heavily involved in the support and maintence of older F1q engines, again to split hairs on how old it has to be to be considered old is crazy
Mike
#123
i didnt and you know that...
incase youve forgotten ybs are over 2 decades!!!why are you still using these different times and dates when no body else has????
i told miker a spec and you took the piss and now iv proven you wrong!!!
so now you try throwing times and dates in the mix as well as a load of bollox to make yourself look more clever...
cheers danny
#125
incase youve forgotten ybs are over 2 decades!!!why are you still using these different times and dates when no body else has????
i told miker a spec and you took the piss and now iv proven you wrong!!!
My comment was that modern F1 cars dont use valve springs, thats not wrong, its entirely correct.
#127
Decent of you to admit it Danny,
I think people are splitting hairs over a simple term "Historic" and "Current" one implies it is happening now the other that it was used in the past,
Me personally l think to say it is F1 spec is aload of tosh as the first thing l would do as a customer is quiz you on it as a point but thats just me,
With regards Joe l guess what you are saying is he is heavily involved in the support and maintence of older F1q engines, again to split hairs on how old it has to be to be considered old is crazy
Mike
I think people are splitting hairs over a simple term "Historic" and "Current" one implies it is happening now the other that it was used in the past,
Me personally l think to say it is F1 spec is aload of tosh as the first thing l would do as a customer is quiz you on it as a point but thats just me,
With regards Joe l guess what you are saying is he is heavily involved in the support and maintence of older F1q engines, again to split hairs on how old it has to be to be considered old is crazy
Mike
Some YB tuners use DFV springs as a readily available source of good quality springs
Some people who are essentially only backstreet tuners, and not in anyway linked to the manufacturers sometimes end up rebuilding non current F1 engines
Some people love to big their speclist up with terms that arent really meaningful, on my nova ive got touring car rods and lifters, a wrc fuel pump and a group b plenum for example
#128
I wasnt just talking about you, I see LOADS of people (admitedly mainly they seem to be Joe's customers so I think we know where this tends to originate from) using the term "F1 spec" for their springs.
Because despite it being said lots of times now, you seem to be unable to differniate between F1 and Historic F1
wrong about what?
My comment was that modern F1 cars dont use valve springs, thats not wrong, its entirely correct.
Because despite it being said lots of times now, you seem to be unable to differniate between F1 and Historic F1
wrong about what?
My comment was that modern F1 cars dont use valve springs, thats not wrong, its entirely correct.
he also gets invited to alot of auctions by them and a few years back he bought enough spares to build shit loads of dfv engines hence having alot of these valve springs and as theyre a lot of money he has to explain to ppl they have f1 springs hence why ppl say this...does this make them wrong???of course it doesnt
cheers danny
#130
pmsl
#132
Guest
Posts: n/a
You lot are on your high horse's i see well get off them ffs and grow a pair of ball's it's a forum for christ sake :@
One thing and you all jump on the bandwagon,well get a grip and fuck ya misse's instead of whinging like cunt's Oh sorry your misses not putting out well i aint suprised with the attiude's most of u have
One thing and you all jump on the bandwagon,well get a grip and fuck ya misse's instead of whinging like cunt's Oh sorry your misses not putting out well i aint suprised with the attiude's most of u have
#133
What an unfortunate typo regarding Joe @ "Bluesmoke" (as someone put on here)
I know what Danny meant, but reading that sentence made me spit my tea out
PMSL at the tags too:
200mph valve springs, absolute bull chancer ms, bring back abc motosport, crock of shite, danny = angry man, danny fails violently, f1 bullshit, spring your load, total chancer
Not taking sides here, can't be arsed and don't know much either way, just thought the above 2 points were funny as hell
I know what Danny meant, but reading that sentence made me spit my tea out
PMSL at the tags too:
200mph valve springs, absolute bull chancer ms, bring back abc motosport, crock of shite, danny = angry man, danny fails violently, f1 bullshit, spring your load, total chancer
Not taking sides here, can't be arsed and don't know much either way, just thought the above 2 points were funny as hell
#135
What an unfortunate typo regarding Joe @ "Bluesmoke" (as someone put on here)
I know what Danny meant, but reading that sentence made me spit my tea out
PMSL at the tags too:
200mph valve springs, absolute bull chancer ms, bring back abc motosport, crock of shite, danny = angry man, danny fails violently, f1 bullshit, spring your load, total chancer
Not taking sides here, can't be arsed and don't know much either way, just thought the above 2 points were funny as hell
I know what Danny meant, but reading that sentence made me spit my tea out
PMSL at the tags too:
200mph valve springs, absolute bull chancer ms, bring back abc motosport, crock of shite, danny = angry man, danny fails violently, f1 bullshit, spring your load, total chancer
Not taking sides here, can't be arsed and don't know much either way, just thought the above 2 points were funny as hell
as if you needed to put the tags up!!!incase anyone didnt see them...
nice one si b
cheers danny
#136
well you saw his post so why bring it up??????
#138
The typo I was referring to wasn't the Bluesmoke joke Danny - it was regarding what you wrote.
You said "He knows HES shit", which sounds a very rude dig at Joe from you of all people
You meant "He knows HIS shit"
I was only laughing at that, as just a letter difference and it's totally changed what I know you meant :
Originally Posted by b19 dfp
not letting people slate him as he knows hes shit!!! cheers danny
You said "He knows HES shit", which sounds a very rude dig at Joe from you of all people
You meant "He knows HIS shit"
I was only laughing at that, as just a letter difference and it's totally changed what I know you meant :
Originally Posted by b19 dfp
not letting people slate him as he knows hes shit!!! cheers danny
#139
Don't let the others ribbing you get your back up though - right or wrong, just rise above it.
People love it when other people fall for the bait, justified or not
Let your car do the talking for you
People love it when other people fall for the bait, justified or not
Let your car do the talking for you
#140
the springs are made by the same company that make f1 springs wound however you want..
if joe stevens builds some f1 engines (wich he does loads) what has that got to do with him competing against brawn in f1?????
hope that helps and youl now sleep tonight???
cheers danny
if joe stevens builds some f1 engines (wich he does loads) what has that got to do with him competing against brawn in f1?????
hope that helps and youl now sleep tonight???
cheers danny
see, my thread has helped at least one person out. it would seem its helped you out to know what springs you put in your own engines. as the first reply i got yesterday reads that they are not f1 springs but made by a company that makes/made f1 springs. But we we all know that they ARE f1 springs. I'm glad my post could be of some service
#143
this topic is funny i had some bloke blagging my boss up saying for Ł5000 he could modify an engine ohv in a 1.1 fiesta to destroy practly anything on the road and would look no different, when i said i think the guys full of shit he came back with well i think this guy knows his stuff he used to build F1 engines
#145
well some people think that cossies are shoite shoite shoite old fords. So they go on another forum. Whilst i wouldn't suggest you go to another car forum, why dont you go to another thread instead, there maybe something you like there
Last edited by wozzy; 09-12-2009 at 07:30 PM.
#146
after reading most of this thread, i gather that a few people are comparing engine builders against each other..can it be comparable when they build different engines? also probably a daft question, but what makes a good engine builder?
#147
Correct me if I'm wrong Chip but aren't the current xe's still built using Swindon parts ? not Arrow as you have in your engine.
Not nit picking obviously.
Lots of second hand information coming up in this thread from you which tbh IS a bit out of order as your out to wind Danny up.
I can think of a few well respected people that have used similar parts in their engines and mentioned it yet you or others haven't given them hell about it then.
Not nit picking obviously.
Lots of second hand information coming up in this thread from you which tbh IS a bit out of order as your out to wind Danny up.
I can think of a few well respected people that have used similar parts in their engines and mentioned it yet you or others haven't given them hell about it then.
Last edited by JonnyBravo; 09-12-2009 at 07:45 PM.
#149
Correct me if I'm wrong Chip but aren't the current xe's still built using Swindon parts ? not Arrow as you have in your engine.
Not nit picking obviously.
Lots of second hand information coming up in this thread from you which tbh IS a bit out of order as your out to wind Danny up.
I can think of a few well respected people that have used similar parts in their engines and mentioned it yet you or others haven't given them hell about it then.
Not nit picking obviously.
Lots of second hand information coming up in this thread from you which tbh IS a bit out of order as your out to wind Danny up.
I can think of a few well respected people that have used similar parts in their engines and mentioned it yet you or others haven't given them hell about it then.
not that its blatentley obvious to notice that...
#150
I class Chip as a mate, we are all entitled to our own opinions which is why he goes on like he does.
I just feel in this case its uncalled for.
I'd be happy to use any of the big name tuners that have been mentioned so I'm not part of any crew, nor would I be if I had a MAD SCS or anyones elses engine, Its the internet, step away from it and you quickly appreciate they are all very good at what they do.
I just feel in this case its uncalled for.
I'd be happy to use any of the big name tuners that have been mentioned so I'm not part of any crew, nor would I be if I had a MAD SCS or anyones elses engine, Its the internet, step away from it and you quickly appreciate they are all very good at what they do.
#151
and yes i will let the car do the talking as its already proving itself..
cheers danny
#152
I class Chip as a mate, we are all entitled to our own opinions which is why he goes on like he does.
I just feel in this case its uncalled for.
I'd be happy to use any of the big name tuners that have been mentioned so I'm not part of any crew, nor would I be if I had a MAD SCS or anyones elses engine, Its the internet, step away from it and you quickly appreciate they are all very good at what they do.
I just feel in this case its uncalled for.
I'd be happy to use any of the big name tuners that have been mentioned so I'm not part of any crew, nor would I be if I had a MAD SCS or anyones elses engine, Its the internet, step away from it and you quickly appreciate they are all very good at what they do.
#153
Benni.
#154
I class Chip as a mate, we are all entitled to our own opinions which is why he goes on like he does.
I just feel in this case its uncalled for.
I'd be happy to use any of the big name tuners that have been mentioned so I'm not part of any crew, nor would I be if I had a MAD SCS or anyones elses engine, Its the internet, step away from it and you quickly appreciate they are all very good at what they do.
I just feel in this case its uncalled for.
I'd be happy to use any of the big name tuners that have been mentioned so I'm not part of any crew, nor would I be if I had a MAD SCS or anyones elses engine, Its the internet, step away from it and you quickly appreciate they are all very good at what they do.
in truth i respect any one that does well at something and iv always said this..
mad martoon harvey i rate as top builders and theyve all achieved something and are willing to prove it in one way or another...
what does piss me of and get my back up is alot of mad customers realy do believe that thier engines are superior wich i know is not the truth as most of us all use the same parts(except f1 valve springs of course)so dont understand this but that doesnt mean all the mad crew just a stupid few and i shouldnt turn it around to that either...
what im trying to say its a shame more people arent like yourself
cheers danny
#155
You know when some people wind you the fuck up? Well to me its that Chip geezer, i have not seen anything other than preaching or winding up from him. He ruins any decent thread and yes i reported his abuse to a moderator to get nothing done, he is obviously above the moderators too. Nearly every thread turns into "his" show.
Still on a friendly note, how is that shack going?
God how can i hate someone so much that i don't know, i think its best i kill myself LOL. Obviously he is a normal human being in the flesh and would most probably get on fine with him, but PLEASE loose the up yourself attitude if only for my sanity
Still on a friendly note, how is that shack going?
God how can i hate someone so much that i don't know, i think its best i kill myself LOL. Obviously he is a normal human being in the flesh and would most probably get on fine with him, but PLEASE loose the up yourself attitude if only for my sanity
Last edited by Turner RS; 09-12-2009 at 08:24 PM.
#156
Turner RS,
Everytime you post about Chip he accuses you of stalking him on here, and you deny it, yet here you are again talking about Chip
This is like Eastenders but real life lol
Everytime you post about Chip he accuses you of stalking him on here, and you deny it, yet here you are again talking about Chip
This is like Eastenders but real life lol
#157
Guest
Posts: n/a
#158
You know when some people wind you the fuck up? Well to me its that Chip geezer, i have not seen anything other than preaching or winding up from him. He ruins any decent thread and yes i reported his abuse to a moderator to get nothing done, he is obviously above the moderators too. Nearly every thread turns into "his" show.
Still on a friendly note, how is that shack going?
God how can i hate someone so much that i don't know, i think its best i kill myself LOL. Obviously he is a normal human being in the flesh and would most probably get on fine with him, but PLEASE loose the up yourself attitude if only for my sanity
Still on a friendly note, how is that shack going?
God how can i hate someone so much that i don't know, i think its best i kill myself LOL. Obviously he is a normal human being in the flesh and would most probably get on fine with him, but PLEASE loose the up yourself attitude if only for my sanity
#159
Ignore feature? I am not THAT offended LOL, it makes my day reading his drivvel if i am honest, without it i wouldnt bother posting LOL! I love to hate him Call that stalking, a sexual desire, hatred whatever it is just the internet and its a place to escape real life as Richie says its Eastenders
#160
Ignore feature? I am not THAT offended LOL, it makes my day reading his drivvel if i am honest, without it i wouldnt bother posting LOL! I love to hate him Call that stalking, a sexual desire, hatred whatever it is just the internet and its a place to escape real life as Richie says its Eastenders