COLEYST200

iTrader: (3)

can any one give me a ball park figer wot im looking at to have a 205 block rebord . and a crank regrind ??????????

COLEYST200

iTrader: (3)

Any one

LHD220Turbo

iTrader: (4)

between £80-100 for a rebore

and between £80 - £120 for the crank; i'd recommend getting the crank balanced with the flywheel.

prices will vary a fair bit to be honest

COLEYST200

iTrader: (3)

THANKS MATE thats helped me a lot

LHD220Turbo

iTrader: (4)

no problem

maybe someone on here can recommend a company in Brum to do it, just get it done properly rather than worry about the price......although to be fair, any decent machinist could do it

clarke5700

depending on how much has to come off i can get a crank ground for £80 and same with the block realy

Dirty Harry

iTrader: (12)

Just a word of caution there is vrank grinders and there is proper crank grinders also boring
anyone engien recon place can bore and grind BUT to what standard
personally you need a good machine shop to do it as lets face facts its not a 1300 CVH your building is it
if your unsure I would contact Martin Hadland seeing your in Brum,Iam sure he will advice you on where to go

LHD220Turbo

iTrader: (4)

Coley; didnt realise it was your car that died on the rollers

https://passionford.com/forum/showth...47#post3727147

you poor fucker! -

JTECH James

iTrader: (13)

the machine shop martin uses is superb, they did all my work

marco polo

iTrader: (1)

hi coley
are you sure it needs a crank regrind ?

RUBY123

iTrader: (2)

halesowen engines is very good and reasonable i had a block bored out and honed and i think it cost £50 something quid plus its not that far for you as you are in birmingham

jacko

90 all in for us