Bloke at work has had rather a nasty accident!
#1
Bloke at work has had rather a nasty accident!
Some guy I work with was using an angle grinder to cut some bits up. Anyway, the grinding disc dug in and it flicked back, getting him right in the face!
Slashed him from where his jaw bone is, up his cheek, and across his nose
He said he didn't feel any pain at all, the fooker even drove himself to a hospital with tea towels wrapped round his face, to literally hold his face on. Didn't get as far as his eye as he did have goggles on, so really, he had a very lucky escape!!
Slashed him from where his jaw bone is, up his cheek, and across his nose
He said he didn't feel any pain at all, the fooker even drove himself to a hospital with tea towels wrapped round his face, to literally hold his face on. Didn't get as far as his eye as he did have goggles on, so really, he had a very lucky escape!!
#4
PassionFord Post Whore!!
Join Date: May 2003
Location: huddersfield
Posts: 5,807
Likes: 0
Received 0 Likes
on
0 Posts
very nasty, seen someone at work had a finger taken clean off, also so many people knocked clean sparco forgetting there was a fuck off big crane hook above their heads lol
matt
matt
#6
Lukesville
iTrader: (2)
I had a similar experience where the fucker back lashed at me and sliced through my jacket.... thank fuck it was winter and i had a jumper on uderneath.I went white as a ghost and immedialty check to see if my nipple was intact.
Hope your mate is ok and all can be sorted for him.
Hope your mate is ok and all can be sorted for him.
Trending Topics
#10
Never gonna give you up!
Join Date: Sep 2004
Location: Location: Location: Location: Location:
Posts: 5,852
Likes: 0
Received 0 Likes
on
0 Posts
Accident? Bullshit he did it on purpose!!
Early finish on a friday rocks!! Long weekend. Your colleague is a clever guy
Early finish on a friday rocks!! Long weekend. Your colleague is a clever guy
#12
Advanced PassionFord User
Christ almighty that sounds nasty, hope the dude is alright !
Took the tip of one of my fingers about a year ago with a grinder, the smell of burnt flesh was worse than the pain
Didnt hurt too much at the time but next couple of days were mighty sore !
Took the tip of one of my fingers about a year ago with a grinder, the smell of burnt flesh was worse than the pain
Didnt hurt too much at the time but next couple of days were mighty sore !
#13
I've found that life I needed.. It's HERE!!
Join Date: Nov 2006
Posts: 1,169
Likes: 0
Received 0 Likes
on
0 Posts
my fear when i use an angle grider is the disk shattering, thankfully i've not had it happen (touch wood) but your mate was lucky not to have his face wrapped round the spindle of the grinder.
#14
DEYTUKURJERBS
I rarely even wear goggles when using a grinder, and i use them alllll the time.
Kinda makes me worried now. Well, a bit. I like to live in the "it wont happen to me though" way.
Hence why I prob got AIDS by now
Kinda makes me worried now. Well, a bit. I like to live in the "it wont happen to me though" way.
Hence why I prob got AIDS by now
#15
PassionFord Post Troll
iTrader: (3)
i was once cleaning out the inner arch on my old van with a knotted wire brush attatchment and i touched it against the lip to the outer arch, ripped the grinder out of my hand, straight across my arm and then tangled itself up in my t shirt cutting my arm and chest to pieces, still got the scars now!
#17
Cossiemodo
Join Date: Jan 2006
Location: Liverpool
Posts: 3,075
Likes: 0
Received 0 Likes
on
0 Posts
i was once cleaning out the inner arch on my old van with a knotted wire brush attatchment and i touched it against the lip to the outer arch, ripped the grinder out of my hand, straight across my arm and then tangled itself up in my t shirt cutting my arm and chest to pieces, still got the scars now!
#18
I've found that life I needed.. It's HERE!!
Join Date: Oct 2007
Location: Straight outta Essex
Posts: 1,081
Likes: 0
Received 0 Likes
on
0 Posts
Thats very nasty, hope hes ok!
I saw my old man get the bottom of his lip taken off when a Sthil saw blade exploded whilst cutting steel on a barn conversion job. He was lucky as it could of taken his face off.
Also saw a guy try to open a site tool box with the padlock hoop and the handle at the same time! I watched his finger roll across the top of the box and onto the floor. We all looked at each other and he was looking as if to say who the hell does that finger belong to? Didnt take him to long to find out though!
I saw my old man get the bottom of his lip taken off when a Sthil saw blade exploded whilst cutting steel on a barn conversion job. He was lucky as it could of taken his face off.
Also saw a guy try to open a site tool box with the padlock hoop and the handle at the same time! I watched his finger roll across the top of the box and onto the floor. We all looked at each other and he was looking as if to say who the hell does that finger belong to? Didnt take him to long to find out though!
#19
BANNED
BANNED
iTrader: (2)
Join Date: Jul 2006
Location: West London
Posts: 12,617
Likes: 0
Received 0 Likes
on
0 Posts
nasty. wouldnt mind seeing it though lol.
the grinder i had at work bounced off what i was grinding and came down on my knuckle right in the middle. went right to the bone didnt hurt and didnt bleed either. one of the office girls didnt like it though when i showed her the bone moving between the skin that looked like moses had parted.
but saying that for about yr after it i had problems bending it
the grinder i had at work bounced off what i was grinding and came down on my knuckle right in the middle. went right to the bone didnt hurt and didnt bleed either. one of the office girls didnt like it though when i showed her the bone moving between the skin that looked like moses had parted.
but saying that for about yr after it i had problems bending it
#21
I've found that life I needed.. It's HERE!!
I managed to take the end off two of my fingers at work on my miller. When i got to hospital the nurse asked what i had done to which i replyed "cut the end's of my fingers off" she said "I don't think you would have done". She nearly passed out when i showed her lol The ex-rays looked good, you could see loads of bits of broken bones. From what I can remember the local anesthetic hurt more than the accident
#22
i was once cleaning out the inner arch on my old van with a knotted wire brush attatchment and i touched it against the lip to the outer arch, ripped the grinder out of my hand, straight across my arm and then tangled itself up in my t shirt cutting my arm and chest to pieces, still got the scars now!
Im sure I got a couple of the wires fly off and hit me.
I bought a full face mask after that, and try to use that when using a grinder of any sort now.
For all they cost, its worth buying 2-3 of them, just to have them lying handy anywhere in the workshop...so no excuse not to use one.
#23
Baby Cheesus
iTrader: (4)
sounds nasty rich!
i was working down the lockup with stav one night, cutting the downpipe off the 3dr and the fookin disc shattered and kinda rolled up my arm. didnt hurt at the time, just put another disc on an carried on lol
didnt really bleed much either but fook me it hurt a while later. still got a nice scar too
i was working down the lockup with stav one night, cutting the downpipe off the 3dr and the fookin disc shattered and kinda rolled up my arm. didnt hurt at the time, just put another disc on an carried on lol
didnt really bleed much either but fook me it hurt a while later. still got a nice scar too
#25
Too many posts.. I need a life!!
Join Date: Feb 2006
Location: corby or manchester
Posts: 809
Likes: 0
Received 0 Likes
on
0 Posts
see that kind of thing happen a lot in work (without injury) when some dumb cunt chops through something heavy and the object being cut collapses under its own weight near the end of the cut
#26
PassionFord Post Troll
iTrader: (2)
Join Date: May 2008
Location: shotminster
Posts: 2,524
Likes: 0
Received 0 Likes
on
0 Posts
i was cutting a pipe against mt garage door with a grinder...the pipe sliped and went through my shoe all the way the the last layer..was well lucky i didnt slice into my big toe..............but to cut half ur face offf...fuck
#31
10K+ Poster!!
iTrader: (5)
i hate grinders with a passion, i really do lol
doesnt help when i worked on the rail way and we used a 12" engine powered cutting saw to cut rail lol, the disc got a wobble on and what you have to do is chuck the machine away from you as the discs shatter when they geta wobble on sod having one of thos shatter on you
but grinders are just dangerous
doesnt help when i worked on the rail way and we used a 12" engine powered cutting saw to cut rail lol, the disc got a wobble on and what you have to do is chuck the machine away from you as the discs shatter when they geta wobble on sod having one of thos shatter on you
but grinders are just dangerous
Thread
Thread Starter
Forum
Replies
Last Post
borboyous
Cars for Sale
6
22-08-2015 11:17 AM
yawiejon
General Car Related Discussion.
15
09-08-2015 06:36 PM