NEW PRODUCT. ATTENTION ALL WEBER L8 & P8 OWNERS.
#82
Ok, all the above will work as per normal except the following.
You will LOSE:
Boost valve duty cycle.
But you will gain:
Lambda correction %
Injection phasing position.
Idle valve duty cycle %...
And the ability to:
Reset The P8 properly.
Drive the following items at will:
DIS Cyl 1 and 4
DIS Cyl 2 and 3
Injectors
Fuel Pump
Idle valve
Boost Valve.
Be aware your P8 needs to be modified internally to allow this data to pass through to the connectors. This can be done here for £35.
The software for L8 and P8 datastreaming can be added to our old chips for £50 including delivery back to you next day. All new chips will already be thus equipped as std.
You will LOSE:
Boost valve duty cycle.
But you will gain:
Lambda correction %
Injection phasing position.
Idle valve duty cycle %...
And the ability to:
Reset The P8 properly.
Drive the following items at will:
DIS Cyl 1 and 4
DIS Cyl 2 and 3
Injectors
Fuel Pump
Idle valve
Boost Valve.
Be aware your P8 needs to be modified internally to allow this data to pass through to the connectors. This can be done here for £35.
The software for L8 and P8 datastreaming can be added to our old chips for £50 including delivery back to you next day. All new chips will already be thus equipped as std.
#83
PassionFord Post Whore!!
Join Date: Sep 2003
Location: Macclesfield - you'll never leave....!
Posts: 4,519
Likes: 0
Received 1 Like
on
1 Post
how will the boost work stu, will there now be no overboost facility in the chip , ie the escos lectron valve will work like a amal valve which will just open at a pre determined level...?
#84
Originally Posted by Dave Henshall
how will the boost work Stu, will there now be no overboost facility in the chip , ie the escos lectron valve will work like a amal valve which will just open at a pre determined level...?
The ability to monitor and datalog the boost valve in the RP Labs monitor will be lost. Your chip will function EXACTLY as it always did before.
#90
PassionFord Post Whore!!
Join Date: Sep 2003
Location: Macclesfield - you'll never leave....!
Posts: 4,519
Likes: 0
Received 1 Like
on
1 Post
does the interface come from the ecu (ie internal to the car) or does it go onto the loom and out to under the bonnet on a escos? would you have to splce into it it at the ecu end of the loom if you wanted it internal to the car withou running more cabled thorugh the bulk head?
#96
Testing the future
Stu is on holiday, as are RP Labs.
There should be little requirment for the laptop. Just enough space to install the software, and then any disk space left used to datalog. Windows 98 at a minimum I believe, but we should wait for confirmation from Stu.
There should be little requirment for the laptop. Just enough space to install the software, and then any disk space left used to datalog. Windows 98 at a minimum I believe, but we should wait for confirmation from Stu.
#97
Too many posts.. I need a life!!
iTrader: (3)
Join Date: Sep 2005
Location: Denmark
Posts: 767
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by foreigneRS
Stu is on holiday, as are RP Labs.
There should be little requirment for the laptop. Just enough space to install the software, and then any disk space left used to datalog. Windows 98 at a minimum I believe, but we should wait for confirmation from Stu.
There should be little requirment for the laptop. Just enough space to install the software, and then any disk space left used to datalog. Windows 98 at a minimum I believe, but we should wait for confirmation from Stu.
#100
BANNED
BANNED
iTrader: (1)
Join Date: Jul 2003
Location: Wiltshire
Posts: 12,483
Likes: 0
Received 0 Likes
on
0 Posts
A general comment....
Best make sure you get a PC/laptop with a built in RS232 serial port .
Unfortunately, nearly all new laptops now dont have them as standard.
Not all PC hardware is compatiable with most software.
Best make sure you get a PC/laptop with a built in RS232 serial port .
Unfortunately, nearly all new laptops now dont have them as standard.
Not all PC hardware is compatiable with most software.
#101
Too many posts.. I need a life!!
iTrader: (3)
Join Date: Sep 2005
Location: Denmark
Posts: 767
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by SECS
A general comment....
Best make sure you get a PC/laptop with a built in RS232 serial port .
Unfortunately, nearly all new laptops now dont have them as standard.
Not all PC hardware is compatiable with most software.
Best make sure you get a PC/laptop with a built in RS232 serial port .
Unfortunately, nearly all new laptops now dont have them as standard.
Not all PC hardware is compatiable with most software.
#103
Too many posts.. I need a life!!
iTrader: (3)
Join Date: Sep 2005
Location: Denmark
Posts: 767
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by foreigneRS
i have used this software with a pcmcia serial converter from brainbox
I see my serialport back on the laptop, but can not see if it is this or that...
#104
Testing the future
JanDK if you have a 9 pin serial port on your laptop, which you most probably will if it is over 5 years old, then you have the correct thing
the converter that i talk about is because my new laptop, and most new laptops tese days, do not have the serial port as most devices these days connect in other ways (bluetooth, usb, etc)
the converter that i talk about is because my new laptop, and most new laptops tese days, do not have the serial port as most devices these days connect in other ways (bluetooth, usb, etc)
#105
Too many posts.. I need a life!!
iTrader: (3)
Join Date: Sep 2005
Location: Denmark
Posts: 767
Likes: 0
Received 0 Likes
on
0 Posts
Then I DO understand what we are talking about!!!! It is JUST a ordenary plain regular standard serial port I got one of those thats for sure I have seen it with my own eyes!
Thanks Nick...
In the end of the week I will have to laptop ready for carprojects then I just need to make a choice of who is making my new chip and ofcause MotorsportDevelopment to modd my ecu for this IAW software.. wuii
Thanks Nick...
In the end of the week I will have to laptop ready for carprojects then I just need to make a choice of who is making my new chip and ofcause MotorsportDevelopment to modd my ecu for this IAW software.. wuii
#111
PassionFord Post Whore!!
Join Date: Sep 2003
Location: Macclesfield - you'll never leave....!
Posts: 4,519
Likes: 0
Received 1 Like
on
1 Post
hmmm,
forgot about this, looking at the collins powerchip monitor, it does make this option quite cheap in comparison IF you already have access to a laptop,
in reality, i'd be best sending my complete ecu (chip installed) to have the mods done at msd, and buy the software and cable,
£ 35 ecu mod
£ 50 chip mod
£ 25 cable
£ 150 software
+ £ free laptop
= cheaper than the powerchips monitor
a quick q regarding the software security side....
would I have control over what the software is installed on, as in authenticate a passkey on a web server or email address, that allows me to change what laptop i run it on, as i will more than likely need it on multilpe machines, but only active on 1 at any one time, how fast/easy is it to swap licence keys fom one machine to another, and are there any limits to how many time you can swap it over..?
forgot about this, looking at the collins powerchip monitor, it does make this option quite cheap in comparison IF you already have access to a laptop,
in reality, i'd be best sending my complete ecu (chip installed) to have the mods done at msd, and buy the software and cable,
£ 35 ecu mod
£ 50 chip mod
£ 25 cable
£ 150 software
+ £ free laptop
= cheaper than the powerchips monitor
a quick q regarding the software security side....
would I have control over what the software is installed on, as in authenticate a passkey on a web server or email address, that allows me to change what laptop i run it on, as i will more than likely need it on multilpe machines, but only active on 1 at any one time, how fast/easy is it to swap licence keys fom one machine to another, and are there any limits to how many time you can swap it over..?
#112
PassionFord Post Whore!!
Join Date: Sep 2003
Location: Macclesfield - you'll never leave....!
Posts: 4,519
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by Stu @ M Developments
Drive the following items at will:
DIS Cyl 1 and 4
DIS Cyl 2 and 3
stu,
will that that be true for the secs driver board modded p8's aswell not just the pectel software that uses the p8's own driver..?
#114
PassionFord Post Whore!!
Join Date: Sep 2003
Location: Macclesfield - you'll never leave....!
Posts: 4,519
Likes: 0
Received 1 Like
on
1 Post
so if i went to an aftermarket rev counter say, and i needed the room in the ecu for other boards i could remove the secs driver and set up the aftermarket tacho to read correctly by reading half the pulses from one side of the coilpack?
#115
Originally Posted by Dave Henshall
so if i went to an aftermarket rev counter say, and i needed the room in the ecu for other boards i could remove the secs driver and set up the aftermarket tacho to read correctly by reading half the pulses from one side of the coilpack?
Aftremarket will work with our driver you have now, again just set it to "DIS"
But yes, for examples sake; If you wanted to, you could remove and sell your driver and we could enable the distless option in your software whilst we were upgrading your softare to serial datastream output.
Thread
Thread Starter
Forum
Replies
Last Post