Need your help - Starting Problem
#1
Too many posts.. I need a life!!
Thread Starter
Join Date: Apr 2004
Posts: 783
Likes: 0
Received 0 Likes
on
0 Posts
Need your help - Starting Problem
I have a prob with my rouse cossie.
It is down to starting the car. The car takes a while to start when cold and willl not start when hot.
I have changed the water temp sensor
Act sensor
Ignition modual
Coil lead
Anything else I can do, or people have ides what it is down to?
It is down to starting the car. The car takes a while to start when cold and willl not start when hot.
I have changed the water temp sensor
Act sensor
Ignition modual
Coil lead
Anything else I can do, or people have ides what it is down to?
#4
PassionFord Post Troll
my cos is the same.Fires when cold but when its hot it turns and turns.if i bump it it fires straight away. ihave changed every sensor and the engine has just had full rebuild.i even have changed the ecu.if you solve it please let me know and ill do the same.some one has mentioned vapour lock,I have my question in the tec Q &A forum
https://passionford.com/forum/viewto...asc&highlight=
https://passionford.com/forum/viewto...asc&highlight=
Trending Topics
#8
PassionFord Post Troll
that is the only thing i havn't changed new one is in the post,its just something which crossed my mind,probly's not solve the fucker
#10
PassionFord Post Troll
i just thought that when its been running the filter is full of shit making it hard to get fuel through???just an idea.iv changed ev thing else i might aswell change this just for peace of mind cos dnt know when it was last done.if i still cant solve it i think im going to start looking towards the electrics iv you sort it please p.m me mate
#14
PassionFord Post Troll
Originally Posted by haz87
ever considered it might just be the starter motor
The simple things are usually the ones that get overlooked
The simple things are usually the ones that get overlooked
#16
Thread
Thread Starter
Forum
Replies
Last Post