fiesta performance parts + 2.1 Zetec turbo
#1
I've found that life I needed.. It's HERE!!
Thread Starter
iTrader: (1)
Join Date: Jun 2003
Location: oswestry - shropshire
Posts: 1,187
Likes: 0
Received 0 Likes
on
0 Posts
fiesta performance parts + 2.1 Zetec turbo
I could really do with clearing out my mates place of all my spare bits so please buy something as they are all cheap!
Parts avaliable:
2.1 Zetec Turbo engine, fully rebuilt with Wozzna low compression 86mm pistons only done about 400 miles £1000
Worth this for the engine machining work and pistons alone !!!
Well lane turbo centre dump valve with samco hose for fitting £20
Alloy boost hose jointer £5
Turbo rear spoiler £30
excellent condition no scratches or marks
RS turbo steering wheel stitching unbroken some wear on the top of the wheel £30
Crystal oval side repeaters with bulbs £2.50
Momo handbrake handle £20
Indicator and wiper stawks £2
Heater matrix base pannel clips intact £5
Mk5 smooth rear wiper arm £5
140mph dash clocks with rev counter £5
Rear Xr2i or Turbo bumper in silver very good condition £10
Black parcel shelf mint condition £10
White Turbo Arches and Skirts £25
Primer Turbo skirts and arches £25
Primer Turbo rear bumper £10
Other bits i haven't taken a pic of yet
Opening turbo rear windows complete with seals and brackets etc £50
Pair of Electric windows mech complete£30
Pair of Central locking latches and motors £20
Rear Wiper motor £5
Rear anti roll bar £30
Grey carpet £10
Heated screen £40 collection only!!!!
Turbo front brake calipers and disks £30
Standard steering rack £5
8v XR2i Rad £5
16v Xr2i / RS1800 Rad £10
Mk3 mirrors good condition £5
All prices are plus postage and packaging
Parts avaliable:
2.1 Zetec Turbo engine, fully rebuilt with Wozzna low compression 86mm pistons only done about 400 miles £1000
Worth this for the engine machining work and pistons alone !!!
Well lane turbo centre dump valve with samco hose for fitting £20
Alloy boost hose jointer £5
Turbo rear spoiler £30
excellent condition no scratches or marks
RS turbo steering wheel stitching unbroken some wear on the top of the wheel £30
Crystal oval side repeaters with bulbs £2.50
Momo handbrake handle £20
Indicator and wiper stawks £2
Heater matrix base pannel clips intact £5
Mk5 smooth rear wiper arm £5
140mph dash clocks with rev counter £5
Rear Xr2i or Turbo bumper in silver very good condition £10
Black parcel shelf mint condition £10
White Turbo Arches and Skirts £25
Primer Turbo skirts and arches £25
Primer Turbo rear bumper £10
Other bits i haven't taken a pic of yet
Opening turbo rear windows complete with seals and brackets etc £50
Pair of Electric windows mech complete£30
Pair of Central locking latches and motors £20
Rear Wiper motor £5
Rear anti roll bar £30
Grey carpet £10
Heated screen £40 collection only!!!!
Turbo front brake calipers and disks £30
Standard steering rack £5
8v XR2i Rad £5
16v Xr2i / RS1800 Rad £10
Mk3 mirrors good condition £5
All prices are plus postage and packaging
Last edited by xrsi; 05-01-2009 at 05:13 PM.
#4
I've found that life I needed.. It's HERE!!
Thread Starter
iTrader: (1)
Join Date: Jun 2003
Location: oswestry - shropshire
Posts: 1,187
Likes: 0
Received 0 Likes
on
0 Posts
rods are std rods with ARP bolts, as for work, the engine bottom end was speced by the owner of the car who i bbrought it off and did alot of the work himself but have loads of recipts to back everything up.
Management was omex 600 on a base map as its still running in, turbo was a t3 and yes it was a normal downpipe as sump is the escort/fiesta zetec one that is needed to clear the downpipe.
in the next week or so if it doesnt sell im going to be getting my own engine off my engine stand and getting this on it so that i can wip the sump off and get pics of the things inside it to proove the spec etc.
Management was omex 600 on a base map as its still running in, turbo was a t3 and yes it was a normal downpipe as sump is the escort/fiesta zetec one that is needed to clear the downpipe.
in the next week or so if it doesnt sell im going to be getting my own engine off my engine stand and getting this on it so that i can wip the sump off and get pics of the things inside it to proove the spec etc.
Trending Topics
#10
I've found that life I needed.. It's HERE!!
Thread Starter
iTrader: (1)
Join Date: Jun 2003
Location: oswestry - shropshire
Posts: 1,187
Likes: 0
Received 0 Likes
on
0 Posts
i would have to find/buy a pallet from somewhere and then would have to buy loads of shrink wrap to make sure it is safe on there and wouldnt get damaged.
but yeah if you arranged a courier then thats fine as long as they came with a way of lifting the pallet onto the truck and not by hand!
mark - omex and turbo are sold, engine is as is shown in pic.
mack - yep but wrong time of year to sell and i need the money thats tied up in it so thats why its that price
but yeah if you arranged a courier then thats fine as long as they came with a way of lifting the pallet onto the truck and not by hand!
mark - omex and turbo are sold, engine is as is shown in pic.
mack - yep but wrong time of year to sell and i need the money thats tied up in it so thats why its that price
Thread
Thread Starter
Forum
Replies
Last Post
JoeyBoyden
Restorations, Rebuilds & Projects.
26
04-01-2024 02:36 PM