MARTCOS

ello ppl just seeing if anybody knows which wires run to the fans as the previous owner cut a whole load of wires and struggling to relocate them, ive got the main wires coming off the fan itself but anybody know where these connect to.

cheers ian

orionmojo

iTrader: (1)

There should be a black miltiplug on the loom on the drivers side, infront of the rad and sits on the crossmember. The wires are brown and black, so pretty bland and will probably blend in well if they've been chopped.

Good luck!

MARTCOS

ok cheers mate i shall have a look in the morning hopefully wont be to much trouble to locate with any luck.

stevo123

IIRC they go past the drivers strut tower elong the inner wing before they get to the position mentioned above if that is any help. (There is a plug there that can be shorted to switch the fan on for setting timing etc as well). I always thought is was strange that ford recommend the fan running before setting ign timing - guess it has something to do with putting some load on the engine?

MARTCOS

cheers ppl all sorted the wally who had it before cut the switch off the the wires leading to the fan and just left the black and brown wires loose, but then put in a manual switch.

couldnt work out why just the manual switch, and not run both, surely it would of been easier if they cut in themselves and then if you needed to switch the manual on? lol

anyway all sorted and back to how it should be.

cheers


ian

essexRSTSouthend

While on the subject,running two fans on the original wires safe? Just wondering,as i've currently fitted my new fan switch from msd.Before i was running manual switch on different wires.

essexRSTSouthend

Any advice be great.

MARTCOS

as long as the wires are are all good and its fused i cant see it being any problem to be honest.

essexRSTSouthend

Ok cheers for that.