Well specced 2.1 zetec turbo ERST - DEPOSIT TAKEN.
#1
Well specced 2.1 zetec turbo ERST - DEPOSIT TAKEN.
Well, lets try again.............Now logged in as the owner so the ad SHOULD now stay and not be removed!
The car is a 1989 g reg 90 spec. Its had 3 previous owners, Dave has owned it 5 and it has covered 46k from new (400 miles in the last 2 years!)
folder full of receipts and history
Body
The body work is totally standard and the arches have not been trimmed or cut. It has been wax oiled underneath from an early age and it shows.
The car has never been welded or crashed but has seen paint on a few bits ( only to freshen up )
To stiffen up the shell after the coilovers were fitted, it has a adrenallin rear strutbrace which as been proffesionally painted black and the boot trimmed to make it look oe.
Interior
Original interior half retrimmed in top quality black leather with all metal work powdercoated black. (not a tennis cabriolet interior)
rs owners club mats
Suspension
gaz coilover shocks brand new & unused
powder coated rear arms and trailing rods with poly bushes
full S1 anti rollbar setup all powder coated and poly bushed with rose joints on the tie rods ( powder coated black and white )
adjustable TCA's on the front
Had full geometry setup after fitting
Brakes
Cosworth conversion on the front done with new callipers
focus rear disc conversion done with all new parts
braided hoses front and back including in engine bay
Engine
Built by field motorsport for dave keech (cliffs1 on here for his massive s1 project)
2.1 zetec turbo
Low compression pistons
oil spray jets
Farndon steel rods
Baffled sump ( pro painted metalic grey )
Multi layer head gasket
Ported and gas flowed head with larger valves
Noble motorsport cams
American high flow inlet ( powder coated high power silver )
Modified throttle body ( ALS )
403 grey injectors
Pectel p8 with antilag
wrc braided loom
Apexi avcr boost controller fitted but not setup yet
new group a bosch fuel pump in new cradle
mapped by msd (needs setting up since new boost controller fitting, but in last car with the other AVCR, made 380 brake with matching torque. I have misplaced the rdyno print out)
gt30 turbo
area six tubular manifold
custom magnecor coil leads with hidden coilpack and twin hidden ignition amplifiers
custom exhaust with 3.5 outward rolled pipe
custom grs evo 5 intercooler
custom pace ally radiator
pace header tank in black
bailey oil breather in black
brand new bosch alternator on custom cnc machined bracket to clear the water pump
brand new starter motor
Instruments
stack big boost gauge
stack tacho and speedo
stack fuel gauge
stack water gauge
stack egt gauge
stack oil temp gauge
stack oil pressure gauge
act gauge all mounted in custom pods done by twins
Original clocks will be fitted subject to price
alpine ipod ready headunit with uprated speakers allround but looking totally standard
Wheels
17inch rondells subject to price
standard s2 alloys with nearly new tyres on
Transmission
brand new ap racing high torque kit cost £350
S1 box with quaife diff fitted. ( sprayed metallic grey ) Built by barra, has started to jump out of reverse but have the original low mileage box to use the bits from. All forward gears work, select and drive mint.
New B&M quickshift
NOW £6k as is, need garage space to start storing my things.
Car is located near Guildford. Please call Dave after 6pm on 07518387289
The car is a 1989 g reg 90 spec. Its had 3 previous owners, Dave has owned it 5 and it has covered 46k from new (400 miles in the last 2 years!)
folder full of receipts and history
Body
The body work is totally standard and the arches have not been trimmed or cut. It has been wax oiled underneath from an early age and it shows.
The car has never been welded or crashed but has seen paint on a few bits ( only to freshen up )
To stiffen up the shell after the coilovers were fitted, it has a adrenallin rear strutbrace which as been proffesionally painted black and the boot trimmed to make it look oe.
Interior
Original interior half retrimmed in top quality black leather with all metal work powdercoated black. (not a tennis cabriolet interior)
rs owners club mats
Suspension
gaz coilover shocks brand new & unused
powder coated rear arms and trailing rods with poly bushes
full S1 anti rollbar setup all powder coated and poly bushed with rose joints on the tie rods ( powder coated black and white )
adjustable TCA's on the front
Had full geometry setup after fitting
Brakes
Cosworth conversion on the front done with new callipers
focus rear disc conversion done with all new parts
braided hoses front and back including in engine bay
Engine
Built by field motorsport for dave keech (cliffs1 on here for his massive s1 project)
2.1 zetec turbo
Low compression pistons
oil spray jets
Farndon steel rods
Baffled sump ( pro painted metalic grey )
Multi layer head gasket
Ported and gas flowed head with larger valves
Noble motorsport cams
American high flow inlet ( powder coated high power silver )
Modified throttle body ( ALS )
403 grey injectors
Pectel p8 with antilag
wrc braided loom
Apexi avcr boost controller fitted but not setup yet
new group a bosch fuel pump in new cradle
mapped by msd (needs setting up since new boost controller fitting, but in last car with the other AVCR, made 380 brake with matching torque. I have misplaced the rdyno print out)
gt30 turbo
area six tubular manifold
custom magnecor coil leads with hidden coilpack and twin hidden ignition amplifiers
custom exhaust with 3.5 outward rolled pipe
custom grs evo 5 intercooler
custom pace ally radiator
pace header tank in black
bailey oil breather in black
brand new bosch alternator on custom cnc machined bracket to clear the water pump
brand new starter motor
Instruments
stack big boost gauge
stack tacho and speedo
stack fuel gauge
stack water gauge
stack egt gauge
stack oil temp gauge
stack oil pressure gauge
act gauge all mounted in custom pods done by twins
Original clocks will be fitted subject to price
alpine ipod ready headunit with uprated speakers allround but looking totally standard
Wheels
17inch rondells subject to price
standard s2 alloys with nearly new tyres on
Transmission
brand new ap racing high torque kit cost £350
S1 box with quaife diff fitted. ( sprayed metallic grey ) Built by barra, has started to jump out of reverse but have the original low mileage box to use the bits from. All forward gears work, select and drive mint.
New B&M quickshift
NOW £6k as is, need garage space to start storing my things.
Car is located near Guildford. Please call Dave after 6pm on 07518387289
Last edited by davidrsturbo; 07-03-2011 at 04:03 AM. Reason: price added
#5
Made in Scotland
iTrader: (1)
Bit sad that the original got removed, but thems the rules I suppose... the car is absolutely amazing and near on the perfect Series 2 RS Turbo.
How much would a standard 90-spec go for in that condition with 46k miles on it?? ...exactly, think of it that way and this seems like a complete bargain with all the money and mods on it IMO.
Cheers,
Grant
How much would a standard 90-spec go for in that condition with 46k miles on it?? ...exactly, think of it that way and this seems like a complete bargain with all the money and mods on it IMO.
Cheers,
Grant
#7
Spanner monkey
The enigne, turbo, management and mapping alone was alot more than the price of the car!!
This is a very nice, well specced car. If i had the money, i would snap it up.
This is a very nice, well specced car. If i had the money, i would snap it up.
Trending Topics
#13
#19
Price drop to £6k as i really need my garage now to start storing stuff as my renovations are due to start asap.
Would really like to sell the car whole but if it doesn't sell now, i will consider the possibilty of breaking it :-(
Would really like to sell the car whole but if it doesn't sell now, i will consider the possibilty of breaking it :-(
#21
The engine was mapped when in cliffs car but needs the apexi boost controller which is fitted setting up along with the tps sensor at msd. All the bits are the same apart from the boost controller which he sold before I could raise funds to buy it.
If you want it come and buy it
If you want it come and buy it
#22
Regular Contributor
Join Date: Oct 2005
Location: Stourbridge
Posts: 277
Likes: 0
Received 0 Likes
on
0 Posts
Stunninng mate if i was looking for a car there is nothing i would want for 6k but this. Good look with the sale shouldnt hang around at that price, id buy it but quite attached to my money now lol.
#32
#34
I think I would get more for the current price of the car but I dont want to see another nice car broken up but starting to think that will happen to this one
Thread
Thread Starter
Forum
Replies
Last Post
JoeyBoyden
Restorations, Rebuilds & Projects.
26
04-01-2024 02:36 PM
Rsmat
General Car Related Discussion.
42
01-09-2015 09:39 PM