Rob_DOHC

iTrader: (4)

As im sure you've guessed im pretty new to this rst lark, i know the suspension set up of the two cars is different, but i don't know in what way, and which is better?

I have heard of a few people retrofitting S1 suspension to a S2 but wasn't sure why????

Rob,

jammerrs

rs1600i is the best front suspension i beleive, lot of people put this on mk4s and 3s

not too sure on the back though, id of thought S2 as it has thicker anti roll bars

Rob_DOHC

iTrader: (4)

Cheers for the reply do you know what was actually different though? and why/how people retrofit?

Rob,

rs shawn

In general the S1 and S2 shocks and springs are both the same. They will fit mk3 or mk4 cars, inc the same (mk3 Escort) shape orion either way.
The standard S1 suspension was harder and more motorsport based whereas the S2 was manufactured softer to appeal to the up & coming yuppie generation who couldn't afford Porsche cars but wanted something quick and more affordable but still daily drive-able, so had a less aggressive and noticable bodykit & spoiler and softer suspension for town driving.

After market upgrades now make little difference as the kits will fit and work on both cars. You will also find it difficult to buy new original suspension for both cars and if you find some it will be quite expensive, especially compared to uprated equipment. The concours and S1 purists will definately want the original parts so they become more expensive due to lack of new stock.

martinmilne

wat about the front antiroll bar thought it was more involved on the s1 and better ?? but im not sure either just things i heard

anodised

the s1 and rs1600i front rollbar is adjustable

the s2 is not

this is a rs16i item

martinmilne

do they fit on an s2 ? is it worth it

Alex_86

iTrader: (2)

if you just cut a little in it it would

but nope, strange no one has made a copy of the tt arb

anodised

they can be fitted on a s2 but you will need to change to the s1 gearbox and mounts

or find a tt rollbar

muz

You need to have a MK3 or MK5 Escort gearbox end casing or full gearbox for starters. You also have to to drill 2 new holes in the front panel and one new hole in the OSF chassis rail as not all the holes from the origional S2 ARB mounts line up. These 3 holes will also need metal tubes inserted between the tops and bottoms of the front panel to stop the panel crushing when the bolts are tightened as they will work loose otherwise.

Not a hard job really and very worth it.