Has anyone got the wiring/installation instructions for a Clifford Concept 300 Alarm?

Anything is of use, hopefully someone can help

 

Could you advise me on the wiring for the roof mounted clock from a MK4 RST Escort, I have the clock but no idea what the 4 wires going into the multiplug connect to

 

i've got it mate just let me know where to email it cuz im trying to pu it in my web site but i have to go now

 

Yes mate, basically, if your car doesnt have a clock already, you have to get a Permenant positive feed, ignition switched feed, illumation feed and an earth point to where the clock lives (usually routed up the drivers side A pillar) which is a nightmare to do if you have a sun roof. I have done it before, bit tricky but worthwhile.

cocaina_xr2i: was that for me, you have the Clifford Manual???

 

yes mate I've got the instructions for the cliford alarm

 

Excellent, the wiring insturctions yeah?

Email safechav@hotmail.com

 

Damm In my msn a red fez and here something else that i fink is a capri

 

MK2 RS2000

 

Yes mate, basically, if your car doesnt have a clock already, you have to get a Permenant positive feed, ignition switched feed, illumation feed and an earth point to where the clock lives (usually routed up the drivers side A pillar) which is a nightmare to do if you have a sun roof. I have done it before, bit tricky but worthwhile.

Thanks for the wiring info
Which feed is the blue wire for is this the illuminatin ?

 

lol ok then that is it... about the the instructions were they any good?

 

http://www.clifford.com/guides/ogs/c...0uk_owners.pdf