1.6 zetec-s tuning
Thread Starter
15000
Joined: Nov 2005
Posts: 17
Likes: 0
From: cannock
1.6 zetec-s tuning
thinkin bout buyin a 51plate zetec-s but its got 100k on it(motorwaymiles), seems to run sweet so im gonna leave it for a bit but was wondering if the 2litre cams will fit the engine and also the 2litre throttle body? if u have any more sugestions ill be more than happy 2 hear them. thnx
Part of the Furniture
Joined: Dec 2008
Posts: 157
Likes: 1
From: Doncaster
Nope and nope
1250, 1400, 1600, and 1700 Zetec SE engines are completely different from the 2.0 Zetec E
Best way to tune the 1.6 Sigma is (IMO)
Uprated Cams
Aftermarket ECU/remap with raised limiter (dependant on cams and management)
Full Exhaust inc 4-2-1 exhaust manifold +sports or decat (milltek and Piper work very well)
Panel Filter or Cone type induction kit
and (not essential, but reccomended HD big end bolts and HD valve Springs)
Should see in the region in 150bhp if set up right
And ultimately (if your pockest allow) ITB set up from bike TB's or a Jenvey DTH set up
Jon at Shawspeed specialise in these engines as there used in kit cars, so Hes the man to speak to.
1250, 1400, 1600, and 1700 Zetec SE engines are completely different from the 2.0 Zetec E
Best way to tune the 1.6 Sigma is (IMO)
Uprated Cams
Aftermarket ECU/remap with raised limiter (dependant on cams and management)
Full Exhaust inc 4-2-1 exhaust manifold +sports or decat (milltek and Piper work very well)
Panel Filter or Cone type induction kit
and (not essential, but reccomended HD big end bolts and HD valve Springs)
Should see in the region in 150bhp if set up right
And ultimately (if your pockest allow) ITB set up from bike TB's or a Jenvey DTH set up
Jon at Shawspeed specialise in these engines as there used in kit cars, so Hes the man to speak to.
Thread
Thread Starter
Forum
Replies
Last Post
SMILER258
Restorations, Rebuilds & Projects.
36
Sep 28, 2015 09:04 AM
