When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I have a 2006 fiesta zetec s and it has siezed up! I have a 56 plate 2l st engine and just wondering if it will fit stright in or is there mods you have to do to get it in?
I never got the ecu to go with it? Any chance i can get the 1.6 programed for that engine? Also my 1.6 had a screw on oil filter and the st has got paper filter will this be a problem?
it should be easy enough to do. drive train complete and ecu swap.
That is not true, at least if the Duratec is the same style as the Zetec-E engine it replaced, you will most likely find the exhaust and inlet are on opposing sides? There probably are a lot of other things as well, i.e. is the gearbox different on the ST to the Zetec S engine which will be an IB5, will it fit?
That is not true, at least if the Duratec is the same style as the Zetec-E engine it replaced, you will most likely find the exhaust and inlet are on opposing sides? There probably are a lot of other things as well, i.e. is the gearbox different on the ST to the Zetec S engine which will be an IB5, will it fit?
Martin
ford bell housing patterns will fit each other. but drive train includes the gearbox.
