omightone

Hi guys, i ordered a Omex rev limiter with launch control - Clubman twin coil.

But im kinda stuck on how to fit it. said its simple to install but im not really the type to mess with electricals. has anyone fitted one of these or can suggest how i fit it?

there is 2 blue wires a red and a black.

heres what it says in the instructions
http://www.omextechnology.co.uk/Revl...oads/RLCLC.PDF
(scroll to twin coil)

many thanks
steve.

Tank Mike

well your coil earths are pin 1 for cylinders 1&4 and pin 3 for cylinders 2&3 the coil possertive is pin 2

omightone

cheers for that, do you have a diagram of one tho mate? to locate the pins?

Tank Mike

the pins are on the coil, theres a 3 wire plug on the side of the coil. Basicly, put the blue wires to both outside wires and the red one to the middle one.

omightone

just to confirm, is this the plug going into it on the right? http://teambuttnaked.co.uk/coil2.jpg
cheers.

Tank Mike

yes

omightone

Thanks very much, so the far left is coil 1 neg, and far right in coil 2 neg?
cheers for the help.