i have a fez rs turbo runin stage 1 powerchip, kent 34 cam uprated rad an intercooler, full stainless an standard t2 turbo
i recently fooked me turbo an was gona go up the t3 route
but iv seen a gt2560 off a focus rs
so the question is would this be a to big a turbo for the fez and/or to much hassle to fit, i will be putin a 195 chip an bigger injectors an uprated fuel pump on at some point
cheers

 

I don't know what the Focus RS turbo is like size-wise, but the T3 isn't a straight swap either as it requires some mods to be made like moving the radiator forward an inch etc, Fords reason for fitting the T2 was due to the lack of space under the bonnet of the Fez.

Also the car would need to be mapped to suit the FRS turbo, as off the shelf chips (I.E 195) won't be calibrated for this turbo.

Martin

 

i know about movin the rad as mines already been done coz its had 1 on it before i bought it, the only thing with goin t3 is that iv put a double cap cooler on which has moved the rad back on an angle
i know the i can use the normal fez t2 manifold with the gt so it would be in the rite place with lots of room, was just thinkin if its gona be to laggy with what iv got, it needs sendin in to get setup anyway, i just dont wana waist my time getin an fitin the gt

 

Anyone!!!!!