as above its only a 1.3 if not any 1 no were i could hire 1 from ??

 

depends on what car, with 2 of ya it can be done if your not a weakling

 

its a escort mk4 1.3 and there will probly b more than 2 thanks pjay

 

No probs then matey

 

Just get the front of the car as high as possible on blocks etc then drop the engine out the bottom on a trolley jack. easiest way.

engine cranes can be hired cheaply enough from any hire shop.

 

easy peasy!








NO PROBLEM!!!lol i know it doesnt have a head on top of the engine but would only require lifting the car up another 30cm or so, not a problem with blcoks of wood!
and gearbox was still attached to...engine needs to go in the bin now, getting in the way!

hope that gives you an idea matey!

 

nice 1 mate, wat u use to drop the engine down??

as it is goin to be 1.3 engine+gearbox

 

forgot to mention i need an answer from any 1 asap as the car im tkin engine from has to be gone by monday!

 

Personally i would NEVER raise the front of a car like that

 

how do i get the drive shafts out??

 

Take the nut off the TCA and use a ball joint seperator to pop the joint and then just pull the hub and strut till the shaft pops out