Just wondering what is actually involved in corner weighting a car and how it's done???? And the difference it's likely to make to the handling?
Cheers.

 

as far as im aware... your car is put on 4 scales, then the coilovers are adjusted until the readingsn the scales are as equal as possible, not always possible due to front/rear weight differences, but as close as possible.

have a read of this

http://www.northamptonmotorsport.com/default.asp?id=20

 

Cool, cheers that's the sort of info i needed!!

 

Can this be done on a road car? Benni.

 

any car with coilovers

 

You can corner weight anything, but you can only adjust it if you have adjustable spring platforms like on a coilover, or I suppose you could use shims under the springs on a normal shock to change it, but a lot of fucking about

 

And make sure you get it done with the driver sitting in the car!

 

Doesn't need coilovers, any car can be done by adding weight to equalise all four corners, like the radicals were doing today at snetty!!
tabetha