Anonymous

Am rebuilding my engine and am cosidering doing the valve guides as well.
how much play should they have?
if i pull the valve out a little and woble it side to side there is a little play but not a massive amount, is this normal or are they worn?

also do new valve guides come ready to fit or do they need to be reemed out first?

cheers in advance

Mark_w

just had mine done and if you have any play then its worth doing........dont bother doing it trying it yourself and give the head and guides to a head specialist...the place i took mine to charged me £200 to chemical clean head,fit guides,and recut the valve seats and reassemble,with me supplying the new guides and new oil seals

mark

Anonymous

ok cheers mark, will do it myself though as there are very few pro's that i trust anymore. besides have done the rest of the engine myself including all the head work and dont really see the point in paying someone £200 for somthing that i can easily do myself
thanks for the info though mate

Mark_w

hope you got a good hydraulic press to remove them then and a state of the art valve cutting machine if you have you are lucky as they dont come out easy

Anonymous

yea got access to a bloody gurrrrrt press