turning down the boost??
#1
turning down the boost??
my van has just come back from the set up guys and they said turn down the boost strange thing is that its running 18psi on a standerd ecu had the fuel head rebuilt and fueling ok its not running lean know im gona fit my chip again and wanting to run an 12-14psi of boost will this be ok and do you just take the arm off and wind it out or in just want to know chears all
#2
Theres no way its running 18psi without a chip, if theres no chip it will hit the boost limit at 10psi assuming its got an RST lump.
If you've got a bleed valve which im guessing it has adjust that.
If you've got a bleed valve which im guessing it has adjust that.
#3
hello there mate iknew you be first to answer?
anywayz the engine is an rst we spoke to other day iput the conrod out me block not so good?
i then took the bleed valve off and took the chip out to and isaid to you the other day about boost gauges lieing
mine must be lieing
basicly as itold you the other day i alittle gesitant on acceration iv took it up to 3/12-4k but idont want to push her any more what do i do run the standed ecu or what?????
anywayz the engine is an rst we spoke to other day iput the conrod out me block not so good?
i then took the bleed valve off and took the chip out to and isaid to you the other day about boost gauges lieing
mine must be lieing
basicly as itold you the other day i alittle gesitant on acceration iv took it up to 3/12-4k but idont want to push her any more what do i do run the standed ecu or what?????
#4
Originally Posted by barry0777
hello there mate iknew you be first to answer?
anywayz the engine is an rst we spoke to other day iput the conrod out me block not so good?
i then took the bleed valve off and took the chip out to and isaid to you the other day about boost gauges lieing
mine must be lieing
basicly as itold you the other day i alittle gesitant on acceration iv took it up to 3/12-4k but idont want to push her any more what do i do run the standed ecu or what?????
anywayz the engine is an rst we spoke to other day iput the conrod out me block not so good?
i then took the bleed valve off and took the chip out to and isaid to you the other day about boost gauges lieing
mine must be lieing
basicly as itold you the other day i alittle gesitant on acceration iv took it up to 3/12-4k but idont want to push her any more what do i do run the standed ecu or what?????
throw your gauge in the bin! put a new one in!
put your chipped ecu in the car!
put the - 31 actuator on the turbo!
NOW GO TO YOUR NEAREST TUNER AND GET IT SET UP PROPERLY!!!!
#6
write guy have done all of what you said put the boost down to 11 psi with the chip??? my old gauge was a shit and it now live in the bin???must be a faulty spring or somthing have booked up my tunner and it going in nexted week??he said you can drive around but dont use thew turbo to much???thanks for the replys thow chears barry
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Mark RS
Ford RS Cosworth Parts for Sale
7
12-10-2015 07:01 AM
Russ Payne
Ford Sierra/Sapphire/RS500 Cosworth
1
25-09-2015 09:29 PM