My saff cossie updated (25/4/2020)
29-12-2013, 06:35 PM
Resident Wrestling Legend
Join Date: May 2003
Location: Little India
Posts: 50,018
go back to the first post, edit it to be able to click the box that says lcok thread after you post and job done
29-12-2013, 06:41 PM
Glennvestite
Thread Starter
Join Date: Jul 2006
Location: Darlington county durham
Posts: 62,764
When im gonna update the thread I will just put in my title what page its on lol.
29-12-2013, 07:53 PM
Advanced PassionFord User
Join Date: Jan 2007
Location: jara
Posts: 2,294
Quote:
Originally Posted by
Glenn_
Yeh I will matey. As soon as I know when the car has been started I will pop up and see the car and take some pics, well thats if its ok with Gaz which I cant see being a problem.
Glenn no need to keep going up to take pics or a progress report give gaz your email address and hell send pictures to you on a regular basis, its In good hands now mate.
29-12-2013, 08:06 PM
Advanced PassionFord User
Join Date: Sep 2004
Location: north east
Posts: 2,383
Likes: 0
Gaz should be starting yours very soon, it's my car that's holding him up but I'm sure he's finished with mine tomorrow.
29-12-2013, 10:03 PM
Glennvestite
Thread Starter
Join Date: Jul 2006
Location: Darlington county durham
Posts: 62,764
Has yours been a nightmare for him Jus.
Jeff I will see what he says tomorrow and go from there.
30-12-2013, 04:13 AM
TT T38 Power
Join Date: Apr 2005
Location: Somerset
Posts: 22,368
Hope all goes well for you now Glenn
Steve
30-12-2013, 10:39 AM
Glennvestite
Thread Starter
Join Date: Jul 2006
Location: Darlington county durham
Posts: 62,764
30-12-2013, 11:57 AM
Advanced PassionFord User
Join Date: Sep 2004
Location: north east
Posts: 2,383
Likes: 0
Quote:
Originally Posted by
Glenn_
Has yours been a nightmare for him Jus.
Jeff I will see what he says tomorrow and go from there.
Only getting it on the roll over jig was a problem, it wasn't up to the job so had to get it made stronger. It's took him 2 weeks to do it.
30-12-2013, 12:03 PM
Gary Krishna
Join Date: Mar 2008
Location: Rickmansworth, Hertfordshire.
Posts: 4,029
I'm sure it'll all be good from now on Glenn.
I've given up with the bodywork on mine, I'm just going to get it running, abuse it and then put it all into an Escort Cossie.
30-12-2013, 04:19 PM
Glennvestite
Thread Starter
Join Date: Jul 2006
Location: Darlington county durham
Posts: 62,764
Been to the bs today and dropped the rear beam out. It only took me an hour.
The osf seat mount has been repaired.
The rusty bit inside near the osr inner wheel arch.
The reason why the beam had to come out.
30-12-2013, 04:23 PM
Glennvestite
Thread Starter
Join Date: Jul 2006
Location: Darlington county durham
Posts: 62,764
Bahhhhhhh photobucket is a nightmare to use on my phone lol.
Heres the other pic.
30-12-2013, 04:25 PM
Glennvestite
Thread Starter
Join Date: Jul 2006
Location: Darlington county durham
Posts: 62,764
Quote:
Originally Posted by
B13 JUS
Only getting it on the roll over jig was a problem, it wasn't up to the job so had to get it made stronger. It's took him 2 weeks to do it.
What a nightmare. It wad looking well in the booth.
He showed me pics of the underneath on his camera. It looks mint.
30-12-2013, 04:26 PM
Glennvestite
Thread Starter
Join Date: Jul 2006
Location: Darlington county durham
Posts: 62,764
Quote:
Originally Posted by
Kitchen Devil
I'm sure it'll all be good from now on Glenn.
I've given up with the bodywork on mine, I'm just going to get it running, abuse it and then put it all into an Escort Cossie.
Have a word with Gaz I know it might ve a bit to far away fron you but it will ve worth it matey.
I would love an escort cossie.
30-12-2013, 04:40 PM
Ben
Join Date: Aug 2010
Location: Peterborough
Posts: 4,853
Glad to see it's getting sorted mate, and that you didn't break it! You'd of regretted that.
30-12-2013, 05:12 PM
Glennvestite
Thread Starter
Join Date: Jul 2006
Location: Darlington county durham
Posts: 62,764
Thanks matey. It will get there. At least I dont have to rush it together cause I have the puma now. I can do bits to rhe saff evwry now and then.
30-12-2013, 08:26 PM
Gary Krishna
Join Date: Mar 2008
Location: Rickmansworth, Hertfordshire.
Posts: 4,029
Quote:
Originally Posted by
Glenn_
Have a word with Gaz I know it might ve a bit to far away fron you but it will ve worth it matey.
I would love an escort cossie.
Tbh Glenn, I'd travel to the bloody moon if I knew the job I was going to get would be a good one!!
It must be something to do with White sapphires and bodyshops!!
30-12-2013, 09:24 PM
Glennvestite
Thread Starter
Join Date: Jul 2006
Location: Darlington county durham
Posts: 62,764
Tell me about it lol. The rusty bastards.
Does anyone have a spare set of rear koni shockers they dont want. One of mine has popped.
31-12-2013, 03:58 PM
Last Time, Get Off PF FFS
Join Date: Jun 2007
Location: Nuclear Submarine
Posts: 2,704
Quote:
Originally Posted by
Glenn_
Tell me about it lol. The rusty bastards.
Does anyone have a spare set of rear koni shockers they dont want. One of mine has popped.
If only you asked 6 months ago lol. I had one and couldn't get rid of it until I weighed it in
01-01-2014, 09:54 AM
Glennvestite
Thread Starter
Join Date: Jul 2006
Location: Darlington county durham
Posts: 62,764
Baaahhhhhh. You should never through any cossie parts away.
01-01-2014, 05:07 PM
PassionFord Post Troll
Join Date: Jan 2006
Location: WALES
Posts: 2,959
Glenn,I'm glad it's gone to Gaz, I hear he has done fantastic work for quite a few RS owners, I'm sure you have now turned a corner, I am looking forward to seeing the end result.
CheeRS.Lee.
01-01-2014, 05:21 PM
Advanced PassionFord User
Join Date: Dec 2011
Location: manchester
Posts: 2,169
Well done for keeping at it Glenn
01-01-2014, 08:28 PM
Advanced PassionFord User
Join Date: Feb 2006
Location: norfolk
Posts: 1,723
Nice to see its coming along at last Glenn
01-01-2014, 09:10 PM
PassionFord Post Whore!!
Join Date: Nov 2004
Location: Cheshire
Posts: 4,774
What paintwork is it gonna end up having in the end? Rear 1/4's and sills, or you having sides done?
Glad to see some progress pics...
02-01-2014, 08:14 AM
Glennvestite
Thread Starter
Join Date: Jul 2006
Location: Darlington county durham
Posts: 62,764
Sill and rear quarters. You gonna say get the sides done arnt you lol.
Thanks for the comments.
02-01-2014, 08:49 AM
PassionFord Post Whore!!
Join Date: Oct 2010
Location: Liverpool
Posts: 8,944
Bet it's a relief it's in good hands now then Glenn?
03-01-2014, 08:12 AM
Glennvestite
Thread Starter
Join Date: Jul 2006
Location: Darlington county durham
Posts: 62,764
Yeh defo matey. It sounds daft but from the 2 bits he has repaired so far the repair work just looks to be at a higher standard than what was done in the other bodyshop.
03-01-2014, 04:11 PM
15000
Join Date: Jan 2014
Location: Alness, highlands
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
Just read this thread from start to finish! What a carry on Glenn. I'm glad you've got it all sorted out and the car is now moving forward.
03-01-2014, 04:59 PM
How ye lads
Join Date: Mar 2010
Location: Ireland
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
Fantastic to see some work being done on this. All progress from here. Well done.
03-01-2014, 05:09 PM
PassionFord Post Whore!!
Join Date: Nov 2004
Location: Cheshire
Posts: 4,774
Quote:
Originally Posted by
Glenn_
Sill and rear quarters. You gonna say get the sides done arnt you lol.
Thanks for the comments.
I would but if it don't need it then there's no point...
Is he repairing your bumper that got damaged too?
03-01-2014, 08:32 PM
Glennvestite
Thread Starter
Join Date: Jul 2006
Location: Darlington county durham
Posts: 62,764
Quote:
Originally Posted by
Dave-m
Just read this thread from start to finish! What a carry on Glenn. I'm glad you've got it all sorted out and the car is now moving forward.
Thanks mate you must of been reading the thread for a while lol.
03-01-2014, 08:32 PM
Glennvestite
Thread Starter
Join Date: Jul 2006
Location: Darlington county durham
Posts: 62,764
Quote:
Originally Posted by
Roberto_98
Fantastic to see some work being done on this. All progress from here. Well done.
Thank you.
03-01-2014, 08:36 PM
Glennvestite
Thread Starter
Join Date: Jul 2006
Location: Darlington county durham
Posts: 62,764
Quote:
Originally Posted by
slammedorion
I would but if it don't need it then there's no point...
Is he repairing your bumper that got damaged too?
I managed to polish the marks out the front bumper and I bought a second hand bumper off ebay for 60 quid so Gaz is gonna repair it and repaint it.
I also got a door rubbing strip too thanks to KosieNutter.
04-01-2014, 12:42 PM
Too many posts.. I need a life!!
Join Date: Dec 2006
Location: ireland
Posts: 550
Received 0 Likes
on
0 Posts
Good to see you getting it done mate
04-01-2014, 10:32 PM
Glennvestite
Thread Starter
Join Date: Jul 2006
Location: Darlington county durham
Posts: 62,764
13-01-2014, 12:15 PM
Glennvestite
Thread Starter
Join Date: Jul 2006
Location: Darlington county durham
Posts: 62,764
Update time.... Im going back to bs tomorrow to refit the beam. All the welding has been done and the ns needs sorting out to get it to look right again.
I will take pics tomorrow.
13-01-2014, 12:24 PM
Gary Krishna
Join Date: Mar 2008
Location: Rickmansworth, Hertfordshire.
Posts: 4,029
Good stuff Glenn, glad it's getting sorted at last!
13-01-2014, 01:00 PM
Resident Wrestling Legend
Join Date: May 2003
Location: Little India
Posts: 50,018
Quote:
Originally Posted by
Glenn_
Update time.... Im going back to bs tomorrow to refit the beam. All the welding has been done and the ns needs sorting out to get it to look right again.
I will take pics tomorrow.
already?!
you need to tell him to slow down to doing 1 weld a day, he's making other body shops look bad with his speedy services
13-01-2014, 04:10 PM
Glennvestite
Thread Starter
Join Date: Jul 2006
Location: Darlington county durham
Posts: 62,764
Fpmsl at Dojj. He has just text me know saying the os is in paint. This is a proper bodyshop. I cant wait to see it tomorrow. He is on repairing the the wobbly nsr arch and sill since it wasnt finished off.
13-01-2014, 04:10 PM
Glennvestite
Thread Starter
Join Date: Jul 2006
Location: Darlington county durham
Posts: 62,764
Quote:
Originally Posted by
Kitchen Devil
Good stuff Glenn, glad it's getting sorted at last!
Matey get your car up to Gaz.s he will sort yours and make you love it again.
13-01-2014, 07:34 PM
Gary Krishna
Join Date: Mar 2008
Location: Rickmansworth, Hertfordshire.
Posts: 4,029
Quote:
Originally Posted by
Glenn_
Matey get your car up to Gaz.s he will sort yours and make you love it again.
My mind's made up mate, it's going.
I've lost all the love I ever had for it thanks to other people ruining it.