MRM SpeedShop’s 666 Van.
The following users liked this post:
Minirotty (08-02-2018)
#722
Lucifer II - 666
Thread Starter
Thanks bud
What I thought would take half an hour has taken all afternoon lol
Fitment of hub to pikey van column and extended length as changing seats to buckets.
Thankfully I have a lathe and pikkar drill in man cave so was able to make alloy spacer as bolt patterns didnt match
What I thought would take half an hour has taken all afternoon lol
Fitment of hub to pikey van column and extended length as changing seats to buckets.
Thankfully I have a lathe and pikkar drill in man cave so was able to make alloy spacer as bolt patterns didnt match
Last edited by Minirotty; 08-02-2018 at 07:48 PM.
#723
Lucifer II - 666
Thread Starter
Coil on plug design Im working on.
The following users liked this post:
Minirotty (01-12-2018)
#725
10K+ Poster!!
Liking that and those Throttle bodies look the nuts
The following users liked this post:
Minirotty (01-12-2018)
#726
Lucifer II - 666
Thread Starter
Not update here in a while!
Ive now got the van at mg pal Wozza 's house as I haven't any room at the mo after losing my barn start of the year.
Been popping over and working on the maxi conversion and its gona take a while but will be worth it!
Owh someones also copied my idea onto there mk5 van wouldnt mind so much but the blokes a bloody strange one!
post some pics up.
Ive now got the van at mg pal Wozza 's house as I haven't any room at the mo after losing my barn start of the year.
Been popping over and working on the maxi conversion and its gona take a while but will be worth it!
Owh someones also copied my idea onto there mk5 van wouldnt mind so much but the blokes a bloody strange one!
post some pics up.
#727
Lucifer II - 666
Thread Starter
#728
Lucifer II - 666
Thread Starter
#729
Lucifer II - 666
Thread Starter
Heads off and with ALDevelopmets atm.for.some more work I wanted carried out on it.
The following users liked this post:
Minirotty (02-12-2018)
#731
Advanced PassionFord User
After seeing on fb what the other guy has done so far with his van it looks garbage. I take it the holes in his sideskirts are to speed up water/rust issues
Liking those throttlebodies
Liking those throttlebodies
The following users liked this post:
Minirotty (02-12-2018)
The following users liked this post:
Minirotty (02-12-2018)
#733
Advanced PassionFord User
Looks great Kev. I need to pop up and see it as I'm a local now
The following users liked this post:
Minirotty (02-12-2018)
The following users liked this post:
Minirotty (02-12-2018)
#735
Lucifer II - 666
Thread Starter
Thanks mate
haha thanks mate
long story behind that lad too! I sold him his 2.3 Turbo engine, plug ans play set up etc and was initially going to fit it, but I got called up for an operation so had to cancel, I looked after him loads for not being able to do it, I even managed to get 5 friends who live by him offered to do the ebgine swap for him for FREE! But wasn’t good enough, he wasn’t pleasable and I gave up, blocked him from every group I run on FB etc
thanks mate bolt on item so wont always be fitted
Where you at now? Kettles always on lol
Not shy just dont like people lol
long story behind that lad too! I sold him his 2.3 Turbo engine, plug ans play set up etc and was initially going to fit it, but I got called up for an operation so had to cancel, I looked after him loads for not being able to do it, I even managed to get 5 friends who live by him offered to do the ebgine swap for him for FREE! But wasn’t good enough, he wasn’t pleasable and I gave up, blocked him from every group I run on FB etc
thanks mate bolt on item so wont always be fitted
Where you at now? Kettles always on lol
Not shy just dont like people lol
The following users liked this post:
turbo m (02-12-2018)
#736
Advanced PassionFord User
Yeah I saw the comments about the engine fitting.
You come first not him, your health is more important and to get arsy when you have gone out of your way to try help get it fitted for FREE for him is a joke that you don't need in your life.
You decided on the engine for bloo yet? just H/Gasget or doing more to it?
You come first not him, your health is more important and to get arsy when you have gone out of your way to try help get it fitted for FREE for him is a joke that you don't need in your life.
You decided on the engine for bloo yet? just H/Gasget or doing more to it?
#737
Lucifer II - 666
Thread Starter
I’m trying to keep BLOO standardish mate, fresh head being sorted and some mild cams
I’ll do some subtle work on the inlet and t/b but want to keep her a smooth engine for the roads.
I’ll do some subtle work on the inlet and t/b but want to keep her a smooth engine for the roads.
#738
Lucifer II - 666
Thread Starter
Couldn’t catch my breath yesterday when my freind Stu Collins tagged me on a for sale ad on FB for this dry sump pan for i4 engine! PACE... rare as hens teeth! I have one on my Maxi Lucifer 2 and thought I was lucky with one! As these aren’t made anymore because PACE’a mould got destroyed, they were made for Formula Asia single seaters. I agreed to buy and my friend Ste Oeriss collected as he lives near by.
I sold my previous set up once for £1000 and was lucky ebough to buy it back! This one, only needs a scavenger pump and good to go! This one... £30! lol yup, absolutly gob smacked!!!
So Pikey Van will also be FWD dry sump set up in the future.
Thread
Thread Starter
Forum
Replies
Last Post
Fudgey
General Car Related Discussion.
35
28-11-2005 02:42 PM
Jim Galbally
General Car Related Discussion.
56
23-07-2004 10:13 PM
focus boy
Shows & Track Days
27
01-05-2004 12:55 AM