MRM SpeedShop’s 666 Van.
#681
Lucifer II - 666
Thread Starter
#682
Lucifer II - 666
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
New engine plans for the Van, I've gotten hold of an engine I built for a customer, long story short... its a fresh built 249bhp and 200lbps 2.3 fully forged engine, running Emerald ECU and its all there just ready to plug and play into the Pikey Van!
But... I need to upgrade my fuel system to go with before I can run it!
But... I need to upgrade my fuel system to go with before I can run it!
![](https://imagizer.imageshack.com/img924/7398/5dhqVA.jpg)
The following users liked this post:
turbo m (17-03-2017)
The following users liked this post:
Minirotty (19-03-2017)
#684
Lucifer II - 666
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
owe yes mate, this is a 9K screamer!
#686
Lucifer II - 666
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Decided seeing as fitting silly power RS engine may as well make her full WRC Escort Maxi F2 spec including kit lol
![](https://cimg5.ibsrv.net/gimg/passionford.com-vbulletin/750x808/img_9167_43fbcc8657880d53ca5e0579b8046f767725c4f1.jpg)
![](https://cimg6.ibsrv.net/gimg/passionford.com-vbulletin/2000x1316/img_9206_d536985bcdd1be8510631a42587728a505608e42.jpg)
![](https://cimg7.ibsrv.net/gimg/passionford.com-vbulletin/750x705/img_9215_png_d9e1536c06e9cd49ed248f1536be11b05034773c.jpeg)
![](https://cimg8.ibsrv.net/gimg/passionford.com-vbulletin/750x388/img_9216_png_999d8306aca84d321eefde3f63e8c09514712752.jpeg)
![](https://cimg9.ibsrv.net/gimg/passionford.com-vbulletin/750x735/img_9217_png_7140c63f7dea0c7e6774edb16cbcd1b73d0a24b7.jpeg)
The following users liked this post:
Psycho Warren (01-08-2017)
#687
Advanced PassionFord User
![Default](https://passionford.com/forum/images/icons/icon1.gif)
That looks mighty
![Big Grin](https://passionford.com/forum/images/smilies/icon_biggrin.gif)
The following users liked this post:
Minirotty (01-08-2017)
The following users liked this post:
Minirotty (02-08-2017)
The following users liked this post:
Minirotty (02-08-2017)
The following users liked this post:
Minirotty (03-08-2017)
#691
Lucifer II - 666
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Thanks lads
Defo not been done before, probably upset people me doing it too lol
Defo not been done before, probably upset people me doing it too lol
#692
Lucifer II - 666
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
A few months ago I had a friend in need, his clutch broke kn his RS and was in urgent beed of one but leed time on them is about 6 weeks, so I let him have one of the new engine as well as the TTV fly wheel to go with it.
Well today I he gave me brand new TTV fly wheel and new 4 paddle clutch.
Also a billet quadrant for the peddle box he made himself for me.
Also managed to reaquire my 355mm 6 pots I'd previosly had on the van, so now will go back on.
Also a stainless steel manifold flange as I want to make my own manifold when I can, only ones available aftermarket are TLE which is designed wrong and one other which isn't to my liking either, so going to make my own when I'm able to again.
Well today I he gave me brand new TTV fly wheel and new 4 paddle clutch.
Also a billet quadrant for the peddle box he made himself for me.
![](https://cimg8.ibsrv.net/gimg/passionford.com-vbulletin/2000x1613/img_0251_48424e84aa2e9f2ea06ea5cd0ad3a5a1e53395b7.jpg)
Also managed to reaquire my 355mm 6 pots I'd previosly had on the van, so now will go back on.
![](https://cimg7.ibsrv.net/gimg/passionford.com-vbulletin/2000x1639/img_0250_82012e9457ae19743b705750951c06ad0b2b9cfd.jpg)
Also a stainless steel manifold flange as I want to make my own manifold when I can, only ones available aftermarket are TLE which is designed wrong and one other which isn't to my liking either, so going to make my own when I'm able to again.
![](https://cimg9.ibsrv.net/gimg/passionford.com-vbulletin/2000x1325/img_0253_7375a56593e0dc90e592cfb9fbc1ba7bf6064fe2.jpg)
Last edited by Minirotty; 24-09-2017 at 12:44 AM.
#694
Lucifer II - 666
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
I'm keeping the quads for now.
I've got the singles in my maxi, trying to twist a mates arm into making a mould to do carbon ones so if hw does ill fit some in van.
I've got the singles in my maxi, trying to twist a mates arm into making a mould to do carbon ones so if hw does ill fit some in van.
#695
10K+ Poster!!
![](https://passionford.com/forum/images/pf_gold_member.png)
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Looks good with the big arches on it.
#696
Lucifer II - 666
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Thanks bud, should look epic once done.
#697
Lucifer II - 666
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Few bits that can be done in the man cave over winter.
Strip and rebuikd the throttle bodies 50mm Jenveys and whilst stripping realised this was my prototype MRM SpeedShop DHT inlet for Jenveys! It donenwell to say Inforgot and it won two seasons of racing with it. Will also flow test the injectors too make sure theyre still up to scratch.
Also not happy with how they we preciously matched to the head so removing head and port matching the inlet system.
So some time to spend on man cave now.
Strip and rebuikd the throttle bodies 50mm Jenveys and whilst stripping realised this was my prototype MRM SpeedShop DHT inlet for Jenveys! It donenwell to say Inforgot and it won two seasons of racing with it. Will also flow test the injectors too make sure theyre still up to scratch.
Also not happy with how they we preciously matched to the head so removing head and port matching the inlet system.
So some time to spend on man cave now.
![](https://cimg7.ibsrv.net/gimg/passionford.com-vbulletin/2000x1504/8a17ceec_ee11_425a_9fab_9ec84d2b6e28_88c2cd86465c70c010197221ce9165ed895698fe.jpeg)
The following users liked this post:
Minirotty (20-11-2017)
The following users liked this post:
Minirotty (20-11-2017)
The following users liked this post:
Minirotty (20-11-2017)
The following users liked this post:
Minirotty (20-11-2017)
#702
Lucifer II - 666
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Thanks lads.
Thanks bud. Id I can get it in the man cave I’l mess with it lol
No probs mate, your wellcome to come have a cuppa in the man cave.
That’s the plan mate, filling time atm.
Bit more done today, my billet camber shim for the trumpets was one piece but I had cut it into secrions for the 52’s and then realised the 52’s had different bolt pattern so using the shim on the 50’s of the van. Needed to shape them all by hand which I enjoyed tbh.
Then also had to salvage the trumpets as whoever removed the engine from the ravecar they were in dented the ends, so I removed the chamfered edges, also contemplating making a alloy inlet air box direcr to trumpets, not sure yet.
That’s the plan mate, filling time atm.
Bit more done today, my billet camber shim for the trumpets was one piece but I had cut it into secrions for the 52’s and then realised the 52’s had different bolt pattern so using the shim on the 50’s of the van. Needed to shape them all by hand which I enjoyed tbh.
Then also had to salvage the trumpets as whoever removed the engine from the ravecar they were in dented the ends, so I removed the chamfered edges, also contemplating making a alloy inlet air box direcr to trumpets, not sure yet.
![](https://cimg9.ibsrv.net/gimg/passionford.com-vbulletin/1500x2000/2529d666_a32e_46b0_95e7_dd73917cd26c_608c8416b193f1136afed4072b7f61600c6e5433.jpeg)
![](https://cimg0.ibsrv.net/gimg/passionford.com-vbulletin/1520x2000/3060d753_881a_4065_83e3_59724ae6f31e_0291f22cbd2742634b57a22a68bc63f3e420a391.jpeg)
![](https://cimg1.ibsrv.net/gimg/passionford.com-vbulletin/2000x1042/46dce868_20af_44af_92c7_125ddd0a2d8c_3ada4180c9adc709f50598f7b48d0db2b1b2362c.jpeg)
![](https://cimg2.ibsrv.net/gimg/passionford.com-vbulletin/1532x1736/062386fe_897d_4754_ab11_90945a76f056_9954828af1af8c2332d430d8fccc50b956e31258.jpeg)
![](https://cimg6.ibsrv.net/gimg/passionford.com-vbulletin/1900x2000/37a8af29_6c7c_4a51_b1ad_8b823b3ec5aa_be7b76ec4d791f6792a8f747c947d7b1dfc6087b.jpeg)
![](https://cimg2.ibsrv.net/gimg/passionford.com-vbulletin/2000x1460/953b6f12_be98_4d19_a50b_25d849efb218_6e31a43b53b149cdd306f44ff9f31739d2908bec.jpeg)
![](https://cimg4.ibsrv.net/gimg/passionford.com-vbulletin/1580x2000/e17094f3_ed4d_4116_ac29_c6ba5ebd6f5e_de63e4160659d1c8204e1175d7f47d1e80289b63.jpeg)
![](https://cimg5.ibsrv.net/gimg/passionford.com-vbulletin/1560x2000/6a7a32a8_7e63_431d_bbd3_6be62cebc95f_740f4c050daaa2f8e501f256cf02a9bd1c85d5b3.jpeg)
![](https://cimg1.ibsrv.net/gimg/passionford.com-vbulletin/2000x1835/6cc9b8c6_8b0d_4923_adc0_f895a45e1409_04cfbfdcc609ac7f5c4b7871a26906fbd8ac9093.jpeg)
![](https://cimg5.ibsrv.net/gimg/passionford.com-vbulletin/1500x2000/447bc32e_da50_4e7c_b707_cd5ce4d17c83_ed54712440d744b3258acb3623d663d4f81235ba.jpeg)
#703
Advanced PassionFord User
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Sweeeeeeet! They’re going to sound awesome mate. I’ve got a zero miles ST170 engine sat doing nothing I’d love to stick some bodies on it like those. Keep up the creative madness
The following users liked this post:
Minirotty (22-11-2017)
#704
Lucifer II - 666
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Thanks mate, sorted out a new parts wash for the man cave.
![](https://cimg2.ibsrv.net/gimg/passionford.com-vbulletin/2000x1504/4605d294_6602_477a_837d_c555fa2fd704_207f482f14d5de30d7afe4b8a9ac6a89ef080198.jpeg)
#705
Lucifer II - 666
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
My new welding table for man cave should be here soon but got some pics sent me of table top
![](https://cimg7.ibsrv.net/gimg/passionford.com-vbulletin/1135x865/441e1221_747d_4f10_aac9_95ccfbfb8853_b6ee23b0cd5b6b0132342983ddc34e6637a694b9.jpeg)
![](https://cimg9.ibsrv.net/gimg/passionford.com-vbulletin/1275x668/bab28326_cb2b_4ee5_bf9c_20864f43297e_f38b45e953c54a05bedf985aad6fc41986d68d2e.jpeg)
![](https://cimg0.ibsrv.net/gimg/passionford.com-vbulletin/1018x641/1101f189_607b_4744_a1dc_827041b57890_2b673b04eaf08ccfea867a0c34aba830a5f8eeb8.jpeg)
The following users liked this post:
Minirotty (02-12-2017)
#707
Lucifer II - 666
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Table arrived so gota find time to assemble it now lol
Also got myself a new toy! Will help with itb ser ups.
![](https://cimg8.ibsrv.net/gimg/passionford.com-vbulletin/2000x1504/58a5a83e_5364_4b57_9865_e7033ecf8c26_20a53d86c04753f5ad6ecc3a4de22d8b10f5d61f.jpeg)
Also got myself a new toy! Will help with itb ser ups.
![](https://cimg0.ibsrv.net/gimg/passionford.com-vbulletin/2000x1504/94e17b7d_2081_4732_9e3f_2d71a308fbd0_bb7cac9a443529d3011b925688c5340b54b93bc7.jpeg)
#708
Advanced PassionFord User
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Nice toys you've got there mate. Got any spare -12 and -10 hose?
#709
Lucifer II - 666
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
I have mate but it’s all intended to be used in the bay of Lucifer2 and Pikey Van.
The following users liked this post:
Minirotty (08-12-2017)
#711
Advanced PassionFord User
The following users liked this post:
Minirotty (08-12-2017)
#713
Lucifer II - 666
Thread Starter
#714
Lucifer II - 666
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Started putting table together, stitch welded the frame thenthe table top.
Had a view in my head on how I wanted the tables legs and frame to look and been a oain to make happen as with box section mild steel its impossible to buy sizes which slot into one another soooo! After some shopping, 50mm x 2.5mm and 45mm x 2.5mm box and then lots of grinding and belt sanding inside of latger box. I’ve made the legs detachable from the table, why? Because my home has no side/rear access so need to eventualy (as plan on buying new home at some point) get the table through the house. As it’ll be so heavy it’ll be easier to be done in two pieces.
Anyway sorry for waffling, will update when I build the frame up.
Had a view in my head on how I wanted the tables legs and frame to look and been a oain to make happen as with box section mild steel its impossible to buy sizes which slot into one another soooo! After some shopping, 50mm x 2.5mm and 45mm x 2.5mm box and then lots of grinding and belt sanding inside of latger box. I’ve made the legs detachable from the table, why? Because my home has no side/rear access so need to eventualy (as plan on buying new home at some point) get the table through the house. As it’ll be so heavy it’ll be easier to be done in two pieces.
Anyway sorry for waffling, will update when I build the frame up.
![](https://cimg6.ibsrv.net/gimg/passionford.com-vbulletin/2000x990/2d477ba5_9c2c_464a_92f3_5c0e5bd26fe7_ed3dd1921ffd90edfb320ee36be5e64199787796.jpeg)
![](https://cimg9.ibsrv.net/gimg/passionford.com-vbulletin/1340x2000/181c628f_0453_4dde_ba37_a5d6e35017db_f0971408cc34a86daa1ea7a80962200e302e99a0.jpeg)
![](https://cimg0.ibsrv.net/gimg/passionford.com-vbulletin/2000x1504/0c0837b2_4d86_469e_91ef_1b1e75342e86_102db5cb435c4303c2c22da8eafe9296671c9612.jpeg)
![](https://cimg1.ibsrv.net/gimg/passionford.com-vbulletin/2000x1504/f69dd14d_7ff4_49a4_81a8_8dcecbea8eca_1560a94dc7f5123829e90105f0b3da1cf2b4fc0a.jpeg)
![](https://cimg2.ibsrv.net/gimg/passionford.com-vbulletin/2000x1504/beb4c487_c9fa_44df_84ec_189ba0df54cc_27a7eaa6691210f879656953dce6b04e3f3a730e.jpeg)
![](https://cimg3.ibsrv.net/gimg/passionford.com-vbulletin/2000x1504/190c723f_079d_420c_9b9f_860362be7bef_1d6417f047912ffa7c39703ee72873741b245a65.jpeg)
![](https://cimg5.ibsrv.net/gimg/passionford.com-vbulletin/2000x1504/c0d70d8e_0a02_4178_a9f7_cdd241d88a06_fd77c52e3267f94ebd4d02185bb3cffd55a93f5e.jpeg)
![](https://cimg6.ibsrv.net/gimg/passionford.com-vbulletin/2000x1504/07a35a3b_4e03_484c_bb7c_aad6019e57b3_39e8355634bdbaed2a9ccdf4af3ac974e3a64eba.jpeg)
Last edited by Minirotty; 16-12-2017 at 01:11 AM.
#715
Lucifer II - 666
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Table finished
![](https://cimg9.ibsrv.net/gimg/passionford.com-vbulletin/2000x1923/79c36a32_31f7_4e9a_9634_f491488e464a_b87a13e551f242715d780c6895f73dbb89875b13.jpeg)
![](https://cimg3.ibsrv.net/gimg/passionford.com-vbulletin/2000x1325/11a22bfc_bc56_4ed2_b9fd_d948a07e0fc8_75df03aaa9c77a6555f1391f60fbe69d331178df.jpeg)
![](https://cimg4.ibsrv.net/gimg/passionford.com-vbulletin/2000x1143/518515c1_9dfb_4f6e_b24e_e203237b9b50_d9142cc313a4613301f2b62b2018797d0d24a6ff.jpeg)
![](https://cimg5.ibsrv.net/gimg/passionford.com-vbulletin/2000x1504/e14036a7_df1e_412b_8a7d_22189bc73008_056542b5c2dea70edf63c1a1ca7155b32547d6a1.jpeg)
![](https://cimg8.ibsrv.net/gimg/passionford.com-vbulletin/2000x1504/fbe7e54e_f6cf_4518_8458_79404a97bae0_736d669aed39333b688fac17b0e11a32fb58ac5b.jpeg)
![](https://cimg9.ibsrv.net/gimg/passionford.com-vbulletin/2000x1235/db790f46_77b0_4cf9_9c55_87bc1fe34e87_4b280981d6fbb80532c5bfc9bce3a632b43c4f04.jpeg)
The following users liked this post:
Minirotty (23-12-2017)
The following users liked this post:
Minirotty (23-12-2017)
#718
Lucifer II - 666
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Thanks lads
Im a happy man with it.
Im a happy man with it.
![](https://cimg7.ibsrv.net/gimg/passionford.com-vbulletin/1500x2000/37a535c0_116d_4d52_9ec2_d04e4aea085a_3ef8853a8a8bda3f6524647676fdfa4ca5ae43ef.jpeg)
![](https://cimg2.ibsrv.net/gimg/passionford.com-vbulletin/2000x1504/4f4a07ed_b6b1_449b_9fd3_476f4cf0d93b_2170e78b5df1c07d0672a0b4ac9bd5cbf394ca83.jpeg)
The following users liked this post:
Minirotty (02-02-2018)
#720
Lucifer II - 666
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Thanks bud cant beat recaro lol
Made a 2nd bank fuel rail using my new lathe & mill. Will be fitting one on the van as enerald K6 runs secondry injector rail along side coil on plugs.
Impressed with how it turbed out.
Made a 2nd bank fuel rail using my new lathe & mill. Will be fitting one on the van as enerald K6 runs secondry injector rail along side coil on plugs.
Impressed with how it turbed out.
![](https://cimg0.ibsrv.net/gimg/passionford.com-vbulletin/2000x1527/2543b481_75dd_4ddd_8656_6c563b60ff95_4459041fff546d644fc28c34cb4a6a88c2dacdd5.jpeg)
![](https://cimg2.ibsrv.net/gimg/passionford.com-vbulletin/2000x1379/32ee8f9f_b79d_42a2_8e6e_4ae87509883a_db98b85456bdc8090c7f7d76a42811762a4bd151.jpeg)
![](https://cimg3.ibsrv.net/gimg/passionford.com-vbulletin/2000x1504/2d7ba2f4_6f24_43ac_8eb6_a54bbe660851_a53f61831f7bb0105bcca49a59787127b27089d9.jpeg)
![](https://cimg4.ibsrv.net/gimg/passionford.com-vbulletin/2000x1198/0e653226_6469_41e0_b069_f5a6dfd74a6f_c92cb8ed3998ebe18764cf064a385e37da1cb057.jpeg)
![](https://cimg5.ibsrv.net/gimg/passionford.com-vbulletin/2000x1667/ad0d8449_a5f1_4bdb_b7c2_e3e889df8cd3_9f7bb5a10cd70c03ecf86369644162997eb7b6b4.jpeg)
![](https://cimg6.ibsrv.net/gimg/passionford.com-vbulletin/2000x1342/d32b2424_8e06_425a_9754_3d4dfaff27d9_e0f17af3ebcbb12e31c3587f256a960d80cd649a.jpeg)