Dazrsturbo Series 2 89 Spec ERST Project ALL FINISHED AND NOW FOR SALE
25-02-2012, 05:00 PM
#202
RS Sees Daylight!
25/2/12
THE RS SEES DAY LIGHT!!!
Got the car out of the garage this morning after fitting the front wheel bearings and hubs ect. Looked so good in the sunlight!
Its back in the garage now ready for fuel and brake lines and fitting if the fuel tank.
Front ends abit high due to no engine weight! also front bumper was just placed on
THE RS SEES DAY LIGHT!!!
Got the car out of the garage this morning after fitting the front wheel bearings and hubs ect. Looked so good in the sunlight!
Its back in the garage now ready for fuel and brake lines and fitting if the fuel tank.
Front ends abit high due to no engine weight! also front bumper was just placed on
03-03-2012, 05:38 PM
#207
Brake Pipes 3/3/12
Made a start on the brake pipes today. Got most of the front ones done and ran the two to the rears. Im just unsure which connection the lines run to from the front, theres a side and top connection on the rear compensators which one do they connect to? anyone know?
08-03-2012, 08:48 PM
#209
Fuel Lines and other bits 8/3/12
Hi all. got a few new parts for the car this week. managed to track down a mint fuel pump cradle and pump for a good price, Also got two brand new Ford steel fuel lines ( wont say how much i payed for these lol :rlmao: ) so i got those fitted along with the rear brake lines. Lines just need a good finishing off to look spot on. i got a front mount intercooler all brand new in the box for 200 quid which i thought was a bargain. Last but not least i piked up a set of chrome seat belt anchors for 14 quid so was pretty chuffed with those, got one fitted and they look real good. Wont be any updates for a week now as im off to scotland. 
pics arnt great as had to use phone!
pics arnt great as had to use phone!
09-03-2012, 09:03 PM
#214
15000
Join Date: Jan 2012
Location: Ipswich, Suffolk
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
25-03-2012, 12:34 PM
#219
update 25/3/12
hello, just a quick update on some new goodies i have for the car. First up is a mint brand new headertank the type the car left the factory with not the later clear jobbie. Sump gasket and crank seals, Baileys swirl pot, Braided Oil hose, Chrome pulley and chrome rocker cover which needs a good clean lol. cant wait to get all this fitted. building the engine up this week so will update later!
26-03-2012, 12:56 PM
#222
PassionFord Regular
Join Date: Mar 2012
Location: Bo'ness In The Garage Carmac Autos
Posts: 415
Likes: 0
Received 3 Likes
on
3 Posts
What a topper
Makes me wish id never sold mine got half way through restro then got to busy to finish it
Never Mind Im sure I will find another hopefully Got my son to help me now
Makes me wish id never sold mine got half way through restro then got to busy to finish it
Never Mind Im sure I will find another hopefully Got my son to help me now
26-03-2012, 02:22 PM
#223
Virgin
Join Date: Mar 2012
Location: Slough
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Loving the work mate. Doing the same to mine so I know how much work goes into it. I guess it must be me but the front end looks a little high compared to the rear a part from that, I am really jealous. 
28-03-2012, 02:38 PM
#226
update 28/3/12
just a quick update, got a new light ford badge fitted to the tailgate so thats finished off now. Also received my new sump so will get that fitted asap, just popped a quick pic in of how teh bottom end is going together. Ordered a cam today so should see that friday!
02-04-2012, 06:15 PM
#227
engine bay/ engine Update 2/4/12
Finally got round to fitting my header tank today, very pleased with the result! picked some new washer jet pipe clips up too so got those fitted, looks nice and tidy now.
The bottom end of the engine is now almost finished, very happy! I got a new cam and pulley so the head is now being built, Piking my flywheel up from the engine centre tomorrow hopefully as iv had it refaced. Engine should be in very soon all going well!!
The bottom end of the engine is now almost finished, very happy! I got a new cam and pulley so the head is now being built, Piking my flywheel up from the engine centre tomorrow hopefully as iv had it refaced. Engine should be in very soon all going well!!
11-05-2012, 05:31 PM
#239
update 11/5/12
updates!!
Jut a few pics of whats been happening. Engine bay is almost done just a few more bits and pieces to fit and abit of wiring ect. the intercooler is all fitted up now so the bumper will be fitted asap.Got my interior door handles refurbished and im really happy with the results! the interior is all in and has just a few little jobs that need doing to complete. going to clean up the exhaust system this weekend and get that all fitted. so not too much more to do now! getting my new refurbed wheels some rubber fitted to them tomorrow so after iv done all the brakes il fit those. more updates soon!!!!
Jut a few pics of whats been happening. Engine bay is almost done just a few more bits and pieces to fit and abit of wiring ect. the intercooler is all fitted up now so the bumper will be fitted asap.Got my interior door handles refurbished and im really happy with the results! the interior is all in and has just a few little jobs that need doing to complete. going to clean up the exhaust system this weekend and get that all fitted. so not too much more to do now! getting my new refurbed wheels some rubber fitted to them tomorrow so after iv done all the brakes il fit those. more updates soon!!!!
28-05-2012, 08:36 PM
#240
update 28/5/12
hi all, been slow on the updates. got my new tyres put on my new wheels. got a nice set of refurbed wheels at a nice price. got my exhaust system cleaned up and fitted too. also got round to fitting some new headlamp fixings as the old ones were rusty. bumper is all fitted nicley now as is the bonnet catch, had to mod it slightly tho as it caught on the intercooler, all sorted now. just a few more little jobs to do now and im taking her for an mot. YES I NEED A NEW BONNET STAY LOL
