Dazrsturbo Series 2 89 Spec ERST Project ALL FINISHED AND NOW FOR SALE
hello all i thought i would start a project thread on my Series 2 ERST.
I have copied my past updates from the rsnorfolk forum to share my thread on here. Here it is when i picked the car up on the 24/5/10 http://i9.photobucket.com/albums/a10.../1730848-2.jpg http://i9.photobucket.com/albums/a10.../1730848-3.jpg http://i9.photobucket.com/albums/a10.../1730848-1.jpg http://i9.photobucket.com/albums/a10.../1730848-4.jpg http://i9.photobucket.com/albums/a10.../1730848-5.jpg http://i9.photobucket.com/albums/a10.../1730848-9.jpg |
looks clean whats your plans for it
|
June 19th 2010
Well tonight i made a start on the boot area as there is some dreaded rust!!! the wheel well is pretty bad and i thought the other holes wernt going to be as bad...... oh how i was wrong! 1x new chassis leg needed! il let the pics do the talking. Scraped off the original sound deadening http://i9.photobucket.com/albums/a10...0/000_0017.jpg Wheel Well http://i9.photobucket.com/albums/a10...0/000_0018.jpg Big Hole *:'( http://i9.photobucket.com/albums/a10...0/000_0019.jpg Also heres how standard n unlifeless it looks underneath http://i9.photobucket.com/albums/a10...0/000_0020.jpg http://i9.photobucket.com/albums/a10...0/000_0021.jpg |
June 21st 2010
well tonight i braved it for the worst and stripped out the interior. i was quite suprised when i got all the carpet removed, the floor wasnt in much of a bad state, it has deffo had past repairs but they are too a good standard which is good! no bird shit welding here! a good tidy up and a full inside respray and jobs a goodun! i then turned my attention to the sunroof.... hmm i really wish i hadn't! it wouldnt open for a start so i knew it deffo was rottern! and it was!! i managed to wind it open a little but the whole mechanism is shot! Check out the pic of the original for speaker i took out of the car... no wonder it wasnt working lol *:listen: http://i9.photobucket.com/albums/a10...0/000_0024.jpg http://i9.photobucket.com/albums/a10...0/000_0025.jpg http://i9.photobucket.com/albums/a10...0/000_0026.jpg :o http://i9.photobucket.com/albums/a10...0/000_0028.jpg http://i9.photobucket.com/albums/a10...0/000_0027.jpg |
June 24th
well i got bk to norwich today after my few days away! so tonight i thought id get the rest of the sunroof out. the 2 bolts that hold the glass to the frame were so rust they werent coming out! the frame was mega rusty so it kind of fell apart! http://i9.photobucket.com/albums/a10...0/000_0029.jpg http://i9.photobucket.com/albums/a10...0/000_0030.jpg |
July 10th 2010
right well i went to the salvage yard this morning at 8.30 to beat the heat and rape a mk4 escort i had heard they had got in. it was untouched so plenty to be taken! got a near perfect complete sunroof (as mine did a vanshing trick! ha!) it just had a few rust spots on the runners, glass ect perfect! i also picked up a mint set of dash clocks, so my rev counter actually works now! got some better condition interior handles and a few other bits n bobs. Pics below. NEW SUNROOF http://i9.photobucket.com/albums/a10...0/000_0037.jpg http://i9.photobucket.com/albums/a10...0/000_0038.jpg WHAT WAS LEFT OF THE OLD ONE! http://i9.photobucket.com/albums/a10...0/000_0039.jpg DASH CLOCKS http://i9.photobucket.com/albums/a10...0/000_0042.jpg OTHER BITS, TAILGATE SEAL, HAZARD LIGHT CAP, HANDLES http://i9.photobucket.com/albums/a10...0/000_0040.jpg http://i9.photobucket.com/albums/a10...0/000_0045.jpg http://i9.photobucket.com/albums/a10...0/000_0041.jpg |
July 25th 2010
AT LAST i finally have a replacement wheel well for the escort! spent a good part of yday morning up the scrapyard cutting this jem out! just gotta fit it now! http://i9.photobucket.com/albums/a10...0/000_0058.jpg clean up underside http://i9.photobucket.com/albums/a10...0/000_0057.jpg http://i9.photobucket.com/albums/a10...0/000_0059.jpg http://i9.photobucket.com/albums/a10...02010/hole.jpg |
July 31st 2010
woke up eairly this morning to head to the scrapyard once again. got a jem of a tailgate rust and rot free! complete with glass, wiper, covers and correct spoiler for the year! mint!!!! http://i9.photobucket.com/albums/a10...0/000_0064.jpg http://i9.photobucket.com/albums/a10...0/000_0065.jpg |
September 1st 2010
hello all! been a while since iv done an update as iv been away in america! while i was away i had the drivers side rear arch repaired, the car is now off the road for a full makeover, i spent a few hours yeasterday doing a few bits. got the new tailgate on and a few bits removed. pics below Arch Before The Repair http://i9.photobucket.com/albums/a10...00816-0729.jpg http://i9.photobucket.com/albums/a10...00816-0729.jpg http://i9.photobucket.com/albums/a10...00816-0729.jpg Arch After and Tailgate Fitted http://i9.photobucket.com/albums/a10...00831-1727.jpg http://i9.photobucket.com/albums/a10...00831-1727.jpg |
September 11th 2010
did abit more on the car today, removed the n/s wing and and gave the inside a clean up. few minor repairs needed but nothing major! o/s wing is to be removed in the week. few pics... http://i9.photobucket.com/albums/a10...r/000_0068.jpg http://i9.photobucket.com/albums/a10...r/000_0067.jpg http://i9.photobucket.com/albums/a10...r/000_0069.jpg http://i9.photobucket.com/albums/a10...r/000_0070.jpg |
September 14th 2010
Started to strip the engine out for the re build How it sits atm http://i9.photobucket.com/albums/a10...00914-2103.jpg |
September 26th 2010
been working on the car this weekend, been welding up unwanted holes in the engine bay and repairing the inner wings. Few pics to show abit of rot that was removed... more updates soon. Shitty Bit Removed http://i9.photobucket.com/albums/a10...00926-1116.jpg New Piece In http://i9.photobucket.com/albums/a10...00926-1221.jpg |
September 29th 2010
got another piece repaired tonight, the front panel corner where it meets the wing was pretty crappy so i replaced it.. heres a few pics. im pretty happy with it, just needs finishing off now. Crap Cut Out http://i9.photobucket.com/albums/a10...00929-2007.jpg New Piece In http://i9.photobucket.com/albums/a10...00929-2101.jpg New and Old http://i9.photobucket.com/albums/a10...00929-2102.jpg |
October 6th 2010
went and picked up my new metering unit tonight.. and im proper happy with it! much better than the one that came off the car. its a fully refurbished unit. also i decided to smooth out the holes on the front panel at the weekend, few pics... http://i9.photobucket.com/albums/a10...01006-2135.jpg http://i9.photobucket.com/albums/a10...01006-2134.jpg http://i9.photobucket.com/albums/a10...01006-2134.jpg http://i9.photobucket.com/albums/a10...01006-2134.jpg http://i9.photobucket.com/albums/a10...01003-1459.jpg |
November 1st 2010
Been a while since i have posted anything, got the box and other stuff out of the bay, decided to ditch the abs system, not far off getting the bay in some primer soon. then its time for new wings and other bits. few pics... Bay http://i9.photobucket.com/albums/a10...r/000_0020.jpg Inside..... *:-[ http://i9.photobucket.com/albums/a10...r/000_0022.jpg |
November 23rd 2010
hello all been a while!!! iv been working on the bay for a while now and its finally almost ready. also got my stuff back from the powder coaters, very happy with them! i will post some pics up of the bay tomorrow! heres some of the parts and my metering unit showing off its new painted bracket! slowly coming along! *:P http://i9.photobucket.com/albums/a10...c/000_0026.jpg http://i9.photobucket.com/albums/a10...c/000_0024.jpg http://i9.photobucket.com/albums/a10...c/000_0023.jpg |
December 10th 2010
well the weather has been rottern and not much has been happening coz its so cold! while iv been tucked away indoors iv been building up the metering unit, few pics below. Bay at present http://i9.photobucket.com/albums/a10...01124-2114.jpg Metering Unit http://i9.photobucket.com/albums/a10...c/000_0044.jpg |
January 17th 2011
been a while since i last posted, been working on the car and its slowly getting done, i started the year by removing the old drivers sill to find the inner sill rottern, that was repaired and a whole new sill was fitted, the drivers floor was next on the list, rottern and full of holes it had to go. Whole new floor pan was fitted and here is the finished result, just got the rear floor to fix up as needs resealing and a few holes welded nothing major which is good! My new wings turned up this week too! more pics of progress soon! http://i9.photobucket.com/albums/a10...1/IMG_0018.jpg http://i9.photobucket.com/albums/a10...1/IMG_0017.jpg |
Originally Posted by gouch1
(Post 5299101)
looks clean whats your plans for it
want to keep the interior and exterior as standard as possible with a few changes under the bonnet. Underside restro too. |
Looking good!
|
Looking good mate the only trubble with the escort is rust:wall:..But keep at it as it's worth it in the end:king:Ive been doing mine for about a year and it is still not done yet as money ran out but now that's sorted ive got to pull my finger out of my bum and do it as i miss driving it good luck with the build mate:top:
|
yeah rust is deffo the issue! im not giving up with it! macdoodle where in norfolk are you???
|
Im in harleston mate not far from norwich.But the one thing i have found out is you can soon spend a lot of money on them the car cost me about £2000 and i have nearly spent that again on it and it still is not on the road yet as you can see by my restro https://passionford.com/forum/restor...n-back-on.html
but fingers x with in the next 3 months it should be:top: |
oh yeah harleston i kno where you are. im over in norwich. yeah i know what you mean about spending money!
|
Looking good fella.Its nice to see its been restored and not scrapped.
|
Where did you get your powder coating done & how cheap are they cheer's mate :grin:
|
looks good mate will be a minter when your finished
|
cheers for the comments. powdercoating was done through my work so was cheaper. but i gt a quote from a powdercoaters in norwich to do all thos bits and they wanted 70 to blast and paint.
|
19th January 2011
Along way off putting these in the car yet but came across them and had to buy. and a bargain at £10! http://i9.photobucket.com/albums/a10...1/IMG_0023.jpg http://i9.photobucket.com/albums/a10...1/IMG_0025.jpg |
Who are the powdercoaters in norwich and which scrapyard did you go to. Cheers.:top:
|
i use hainford hall scrapyard. mastercote is the coaters, in rackheath,norwich
|
Cheer's mate :grin::grin::grin:
|
Looking good mate, keep at it! i find if im getting annoyed i just walk away and leave it for a few weeks then come back, crack on and get it finished! gonna be minted when its done :)
|
yeah i do the same, just walk away for a few hours n then get back on it.
|
update 25th january
25th January 2011
Yesterday i cut the rotted wheel well out of the car ready for the new one to be fitted, while i was at it i stripped the fuel pump cradle off and the petrol tank, New cradle is gunna be needed but the tank is in good nick just needs a nice lick of paint. few pics below, last pic shows what i have to tackle underneath! http://i9.photobucket.com/albums/a10...1/IMG_0042.jpg http://i9.photobucket.com/albums/a10...1/IMG_0050.jpg http://i9.photobucket.com/albums/a10...1/IMG_0045.jpg |
Keep up the good work mate :grin: :grin: this will be a sound S2 when it's all done at least when you chop all the rot out and and replace with better it will last for age's :ban-split: :ban-split:KEEP IT UP :ban-split: :ban-split:
|
Cheers dude, hows yours comming on?
|
Originally Posted by dazrsturbo
(Post 5309256)
Cheers dude, hows yours comming on?
|
good work fella.
i can see where this is going. gonna be mintier than a polo mint :top: |
Excellent work so far mate, keep going!!!
|
All times are GMT. The time now is 02:46 AM. |
© 2024 MH Sub I, LLC dba Internet Brands