Dazrsturbo Series 2 89 Spec ERST Project ALL FINISHED AND NOW FOR SALE
13-11-2011, 06:52 PM
#126
shell arrives home
cheers for the comments chaps.
Heres a few pics of the shell when it returned home to me a few weeks ago. very happy with the outcome. Will take better pics asap as me camera batteries ran out so i had to use me phone.
Heres a few pics of the shell when it returned home to me a few weeks ago. very happy with the outcome. Will take better pics asap as me camera batteries ran out so i had to use me phone.
13-11-2011, 07:36 PM
#127
progress update 1
heres what iv built up so far. Tailgate is almost finished with just the spoiler to go and then the inside covers can be fitted. rear light in and looking way better than the tinted ones which were in the car to start with. go some of the door rubbers in and fitted a new set of strikers which has made a big improvement from the tatty items that were on before. iv tidied the wiring behind the dash up and got rid of any unwanted junk. New sound deadening has been laid and the carpet is in.
Under the bonnet iv fitted a few new clips, the restored brake servo unit , blower motor and the ecus. Iv started on the loom but am waiting on some new clips to arrive to finish this!
Heres a few pics...
Under the bonnet iv fitted a few new clips, the restored brake servo unit , blower motor and the ecus. Iv started on the loom but am waiting on some new clips to arrive to finish this!
Heres a few pics...
15-11-2011, 09:16 PM
#130
few new parts
got a few new parts in the post today, got some new wiring loom clips, new set of fixings for the front wiper mechanism (see pics of how shagged the old ones were) and last but not least got my new polybushes for the rear of the car. this week should see the fitting of the rear suspension and hopefully the spoiler.
Im having a new headlining made atm to replace the tatty as fook one that was in the car. couldn't find the original perforated material so gone for a light grey material which is going to look awesome with the 90 spec interior.
Im having a new headlining made atm to replace the tatty as fook one that was in the car. couldn't find the original perforated material so gone for a light grey material which is going to look awesome with the 90 spec interior.
few more bits done 17/11/11
21-11-2011, 09:57 AM
#138
Will it ever end !!!!!!!
Dont know if you have tried to fit these yet but I got the same ones for mine from ebay and they were an absolute nightmare to fit and i could only actually get one of them to fit and that was after some serious trimming as well - they are basically too big to fit so i went along the route of getting genuine ones from Ford and they just popped in easy.
You will have to let me know how you get on with them.
p.s. you will also need about 15 of these to do a whole engine bay.
You will have to let me know how you get on with them.
p.s. you will also need about 15 of these to do a whole engine bay.
Last edited by s2turbsZVH; 21-11-2011 at 09:58 AM.
21-11-2011, 01:18 PM
#139
Dont know if you have tried to fit these yet but I got the same ones for mine from ebay and they were an absolute nightmare to fit and i could only actually get one of them to fit and that was after some serious trimming as well - they are basically too big to fit so i went along the route of getting genuine ones from Ford and they just popped in easy.
You will have to let me know how you get on with them.
p.s. you will also need about 15 of these to do a whole engine bay.
You will have to let me know how you get on with them.
p.s. you will also need about 15 of these to do a whole engine bay.
Yep your right about them being too big! what a nightmare. i used gen clips where i could and re drilled the holes a little bigger to get them to fit.
21-11-2011, 08:41 PM
#140
Will it ever end !!!!!!!
Keep the pics coming
!!
02-12-2011, 05:37 PM
#143
december 2nd suspension
Hello all, been a while since an update. iv had the nasty sickness bug which put me out of action for abit! got abit done today on the rear suspension, got one side built up. just need to get a nut for the tie rod to finish it off. pretty happy with it so far!
bit of a diffrence here!
bit of a diffrence here!
12-12-2011, 10:24 PM
#146
small update 12/12/11
well things have gone abit slow this week as im waiting on parts to arrive to finish off the rear suspension. so in the mean time iv fitted the screws ect to the body kit to finish it off as its been bonded on. and i also got a new rear decal so i put that on too. i think i put it on a tad bit low but im happy with how it looks. more updates soon!!
13-12-2011, 02:42 PM
#147
Too many posts.. I need a life!!
iTrader: (2)
Join Date: Jan 2010
Location: norfolk
Posts: 566
Likes: 0
Received 0 Likes
on
0 Posts
keep up the good work daz she's starting to look a sweet S2 
mine's been put on hold at mo as my partner has now had my little boy so fringers X i will be getting back on with it soon keep the post's coming
mine's been put on hold at mo as my partner has now had my little boy so fringers X i will be getting back on with it soon keep the post's coming
14-12-2011, 09:58 PM
#148
few new parts
just a small update. fitted my new handbrake link cable tonight. old one was a little worst for wear. also got a new handbrake cable which il be fitting when the clips turn up in the post. i started to fit up the new brake shoes, the fitting kit i got wasn't quite right so i cleaned up and used some of the bits that were on the car and the springs ect that i could use out of the new kit, il get some pics of my progress soon!!
18-12-2011, 01:58 PM
#152
headling is in!
well yesterday i had the headlining put into the car. my old one was nakard so i had a new one made. it isnt the perforated material but is a very nice shade of grey. really happy with how it has turned out! the interior can finally go in!!
Also a big shout out to baggy1979 for hooking me up with a re plated steering column. looks ace!
Also a big shout out to baggy1979 for hooking me up with a re plated steering column. looks ace!
Last edited by dazrsturbo; 18-12-2011 at 02:07 PM.
18-12-2011, 02:49 PM
#155
Too many posts.. I need a life!!
iTrader: (2)
Join Date: Jan 2010
Location: norfolk
Posts: 566
Likes: 0
Received 0 Likes
on
0 Posts
That's a good price as it look's well made and fitted 
how much longer before it's finished as you are makeing alot of progress in a short space of time
how much longer before it's finished as you are makeing alot of progress in a short space of time
18-12-2011, 03:16 PM
#158
Too many posts.. I need a life!!
iTrader: (2)
Join Date: Jan 2010
Location: norfolk
Posts: 566
Likes: 0
Received 0 Likes
on
0 Posts
Mine's at a stand still at the mo as i had a little bash in my partner's astra and that was my only way to get where mine is but finger's X it should be back just before christmas then i can get back on it i just wish mine was in the stage your's is
