Series 1 4x4 cosworth
#526
PassionFord Post Whore!!
iTrader: (2)
Joined: Jan 2010
Posts: 5,904
Likes: 26
From: in someone elses garage
Do you know what car the rear floor pan came out of?
As the one 4x4 rear diff cradle is different to the three door one.
You'll need to find that out before you can get rear arms and arb.
This is a 4x4 rear cradle i fitted to robs cossie so he could run the bigger arb
4x4 diff cradle has the one two bulges for the arb to mount to and the other three door one is flat.
Hope this helps
As the one 4x4 rear diff cradle is different to the three door one.
You'll need to find that out before you can get rear arms and arb.
This is a 4x4 rear cradle i fitted to robs cossie so he could run the bigger arb
4x4 diff cradle has the one two bulges for the arb to mount to and the other three door one is flat.
Hope this helps
#527
Thread Starter
Series 1 4x4 cossie
iTrader: (1)
Joined: Mar 2008
Posts: 2,925
Likes: 43
From: Bonnie Scotland !! Or offshore in Africa!!!!
Yeah mate, having a look through mines the same, i know it came out a saph, saw the rest of it in alys yard, dont know about 4x4 but by the pics it looks exactly the same. Thanks for checking
#535
Thread Starter
Series 1 4x4 cossie
iTrader: (1)
Joined: Mar 2008
Posts: 2,925
Likes: 43
From: Bonnie Scotland !! Or offshore in Africa!!!!
trawling ebay for some trailing arms......will these ones be ok?
http://www.ebay.co.uk/itm/SIERRA-REA...item53e8b9f497
http://www.ebay.co.uk/itm/SIERRA-REA...item53e8b9f497
#537
PassionFord Post Whore!!
iTrader: (2)
Joined: Jan 2010
Posts: 5,904
Likes: 26
From: in someone elses garage
Cutch there 3dr cossie ones do you notice the little rod sticking out on the same side as where the wheel mounts?
Did you find out what rear diff crossmember you've had fitted to the shell?
If it's 3dr then these are for you
if its 2wd saff or 4x4 saff then you need the anti roll bar rods to be on the inside of the arms
Did you find out what rear diff crossmember you've had fitted to the shell?
If it's 3dr then these are for you
if its 2wd saff or 4x4 saff then you need the anti roll bar rods to be on the inside of the arms
#538
Thread Starter
Series 1 4x4 cossie
iTrader: (1)
Joined: Mar 2008
Posts: 2,925
Likes: 43
From: Bonnie Scotland !! Or offshore in Africa!!!!
scratch that I just bought two from Gray at RS Classics. Will be winging their way to me tomorrow! yeah i have a saff cross member, cant see the rod your talking about??
#539
PassionFord Post Whore!!
iTrader: (1)
Joined: Jun 2003
Posts: 5,847
Likes: 0
From: Under the Missus ( . )( . )
this is the one i listed and you can see the antiroll bar drop links to the inner edges of the spring cup next to brake pipe locator
The rod whizz is on about is ringed in red and where the 3dr antirollbar mounts
The rod whizz is on about is ringed in red and where the 3dr antirollbar mounts
Last edited by 3drstretch; 04-09-2011 at 05:47 PM.
#540
Thread Starter
Series 1 4x4 cossie
iTrader: (1)
Joined: Mar 2008
Posts: 2,925
Likes: 43
From: Bonnie Scotland !! Or offshore in Africa!!!!
Ah i thought that might be it but i could hardly see it. cheers mate how much were you looking for your anyways! in fact dont tell me......i have already paid for mine and i will probably kick myself!
#543
Thread Starter
Series 1 4x4 cossie
iTrader: (1)
Joined: Mar 2008
Posts: 2,925
Likes: 43
From: Bonnie Scotland !! Or offshore in Africa!!!!
Cant wait mate, really cant wait. hopefully get my beam etc done this week and put it on next week?
bet it was cheap, wasnt it........no dont tell me........no, tell me.......no dont!!! it would have been a bit to post anyway!
#549
Thread Starter
Series 1 4x4 cossie
iTrader: (1)
Joined: Mar 2008
Posts: 2,925
Likes: 43
From: Bonnie Scotland !! Or offshore in Africa!!!!
I thought about the cup as thats where mine were rotten, will talk to ally about getting them welded up mate. thanks for the pics.