T26 WRC - "RE-IMAGINED" 550bhp+ Prodrive S8 WRC
#602
Boost Junkie
Thread Starter
#611
Boost Junkie
Thread Starter
Took the old girl out for a drive last Saturday and upon coming home I gave her the usual inspection. Found some oil mist on my inner wing that I identified as PAS fluid.
On investigating further I found that my HP PAS line was leaking a small amount of fluid through the core of the hose.
I removed it before it failed, caused a fire or worse.
I took it to my hydraulics shop for a second opinion. They were very helpful as always and put the failure down to heat, and the hose being used slightly outside its rated pressure.
The shop made me up a brand new heavy duty hose there and then free of charge.
I've also been cutting the car up again. Although I'll let the photos do the talking here.
More to come soon
On investigating further I found that my HP PAS line was leaking a small amount of fluid through the core of the hose.
I removed it before it failed, caused a fire or worse.
I took it to my hydraulics shop for a second opinion. They were very helpful as always and put the failure down to heat, and the hose being used slightly outside its rated pressure.
The shop made me up a brand new heavy duty hose there and then free of charge.
I've also been cutting the car up again. Although I'll let the photos do the talking here.
More to come soon
#616
Boost Junkie
Thread Starter
Quick snap now it all done on the exterior.
Bonnet removed and stripped for paint.
Now sporting the full on street racer look. Tempted to go for a Fast & Furious style drive. Haha.
Bonnet removed and stripped for paint.
Now sporting the full on street racer look. Tempted to go for a Fast & Furious style drive. Haha.
#624
Boost Junkie
Thread Starter
Lol, hello Thomas
Got a new addition for the car today.
4ltr Lifeline fully plumbed in extinguisher. This is in addition to the 2.25ltr handheld extinguisher in front of the passenger seat.
Got a new addition for the car today.
4ltr Lifeline fully plumbed in extinguisher. This is in addition to the 2.25ltr handheld extinguisher in front of the passenger seat.
#625
Boost Junkie
Thread Starter
Some of you know the inside is having a few changes and a freshen up. First to arrive is an all new bespoke made gauge pod for the dash top that aims 3 meter at the driver.
This has been made from the original clock housing so fitment is OEM.
View from my drivers seat.
My previous flocked carbon one is for sale.
This has been made from the original clock housing so fitment is OEM.
View from my drivers seat.
My previous flocked carbon one is for sale.
#626
Boost Junkie
Thread Starter
A couple of my parts needed reflocking after 6 years but in fear of a poor colour match on the new VS old I decided to rip it all out and start again.
Also a nice opportunity to tidy wiring and run the extinguisher pipework with the dash now out of the way.
Also a nice opportunity to tidy wiring and run the extinguisher pipework with the dash now out of the way.
#627
Boost Junkie
Thread Starter
Spent the morning tidying up wiring and generally making parts cleaner to use and nicer to get to should I need to at a later date.
Also got the tank bolted up. I went to get a nice bulkhead fitting today which will allow me to do all the plumbing in the car while the dash is out. Then I can pop the scuttle panel off and plumb in the nozzles whenever I want.
Also got the tank bolted up. I went to get a nice bulkhead fitting today which will allow me to do all the plumbing in the car while the dash is out. Then I can pop the scuttle panel off and plumb in the nozzles whenever I want.
#630
Boost Junkie
Thread Starter
Extinguisher all plumbed in cabin side, bracket made and cable fitted.
Also the second of my interior pieces is nearly done. Still in primer, but fits nice.
Huge thanks to my mate Ian for his work on the plastic pieces. Superb quality as always.
Also the second of my interior pieces is nearly done. Still in primer, but fits nice.
Huge thanks to my mate Ian for his work on the plastic pieces. Superb quality as always.
#634
Boost Junkie
Thread Starter
Plans include a cage and various other little bits n bobs. No track days booked as yet but for now im enjoying it as for what I built it. A hugely capable fast road blast