mk6 Escort GTi Turbo, breaking soon.... :(
#125
Advanced PassionFord User
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Originally Posted by pau1rs
looking good...
see the car in the flesh!!! see ya driving down north street to the a12 about 8 tonight!!!
looked sweet mate!!!![Smokin](https://passionford.com/forum/images/smilies/icon_smokin.gif)
see the car in the flesh!!! see ya driving down north street to the a12 about 8 tonight!!!
looked sweet mate!!!
![Smokin](https://passionford.com/forum/images/smilies/icon_smokin.gif)
![Clap](https://passionford.com/forum/images/smilies/9c-clap.gif)
was off to me mates, doing a bit of running in mileage
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
#126
Part of the Furniture
Join Date: May 2003
Location: Sunny Devon
Posts: 178
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
did you get to the bottom of the cause of your "rattle"
car looks sweet as
can't wait to see it a shows
dash looks well nice what it cost ya to have it flocked?
car looks sweet as
![Big Grin](https://passionford.com/forum/images/smilies/icon_mrgreen.gif)
![Big Grin](https://passionford.com/forum/images/smilies/icon_mrgreen.gif)
![Big Grin](https://passionford.com/forum/images/smilies/icon_mrgreen.gif)
![Banana](https://passionford.com/forum/images/smilies/banana_dance.gif)
dash looks well nice what it cost ya to have it flocked?
#127
Part of the Furniture
Join Date: May 2003
Location: Sunny Devon
Posts: 178
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
did you get to the bottom of the cause of your "rattle"
car looks sweet as
can't wait to see it a shows
dash looks well nice what it cost ya to have it flocked?
car looks sweet as
![Big Grin](https://passionford.com/forum/images/smilies/icon_mrgreen.gif)
![Big Grin](https://passionford.com/forum/images/smilies/icon_mrgreen.gif)
![Big Grin](https://passionford.com/forum/images/smilies/icon_mrgreen.gif)
![Banana](https://passionford.com/forum/images/smilies/banana_dance.gif)
dash looks well nice what it cost ya to have it flocked?
#132
Advanced PassionFord User
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
jaypen, yeah i did, bsicaly the pistons where glancing the head
so had em machined down a bit, still slightly rattly but i think thats due to the oil atm... well i hope so neway lol
whitneyd, steady on fella
i aint fitted it yet, shud be some time soon tho
n cheers to everyone else, ruuning a car in is such an ordeal
![Wall](https://passionford.com/forum/images/smilies/wall.gif)
whitneyd, steady on fella
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
n cheers to everyone else, ruuning a car in is such an ordeal
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
#135
Advanced PassionFord User
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Originally Posted by sime73
well done
didn't have any trouble when u disconnected the PATS then ?
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
didn't have any trouble when u disconnected the PATS then ?
![Clap](https://passionford.com/forum/images/smilies/9c-clap.gif)
n jimmy anything over 200bhp will be good with me
![Big Grin](https://passionford.com/forum/images/smilies/icon_biggrin.gif)
should be acheivable, pulls well on boost at 4psi atm
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
#136
Part of the Furniture
Join Date: May 2003
Location: Sunny Devon
Posts: 178
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
howz the running in going any probs??,i know how you feel m8 running a new engine in is an ordeal
done 600 miles in mine now,getting it "set up" on the 14th may
take it easy best things come to those who wait!!...if i wait any longer i will be starting to draw my pension L.OL
real street sleeper,nice & suttle
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
done 600 miles in mine now,getting it "set up" on the 14th may
![Content](https://passionford.com/forum/images/smilies/content.gif)
![Content](https://passionford.com/forum/images/smilies/content.gif)
take it easy best things come to those who wait!!...if i wait any longer i will be starting to draw my pension L.OL
real street sleeper,nice & suttle
![Smokin](https://passionford.com/forum/images/smilies/icon_smokin.gif)
![Smokin](https://passionford.com/forum/images/smilies/icon_smokin.gif)
#137
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Hello!
Nice looking car m8! And being a mk6 turbo, thats sweet
Im starting to build my own Zetec turbo escort soon enough, although the base car will be mk5 1.6 cvh
Anyway, sepcs are gonna be wild...well when the car is finnished some day. But something like this: 2.0l zetec, accralite pistons, burton con rods, custom exhaust and inlet manifolds, ported and polished head, gt28 turbo, custom livemap management, stage2+ bc gearbox, ect ect. But as said the project hasnt even started yet, just waiting to get rip everything off from my escy
Nice looking car m8! And being a mk6 turbo, thats sweet
![Big Grin](https://passionford.com/forum/images/smilies/icon_biggrin.gif)
![Red Faced](https://passionford.com/forum/images/smilies/icon_redface.gif)
![Big Grin](https://passionford.com/forum/images/smilies/icon_mrgreen.gif)
#138
Advanced PassionFord User
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
jaypen, its slow aint it lol!!!
jus done a few long distance runs, starting on the round town stop start stuff, done 300+ so far, gonna do 500 then change the oil to 5/30 and see if it clears the little rattle under load ive still got
then a few more miles and back to ahmed for the injectors, fuel pump n mapping
jus done a few long distance runs, starting on the round town stop start stuff, done 300+ so far, gonna do 500 then change the oil to 5/30 and see if it clears the little rattle under load ive still got
![Sad](https://passionford.com/forum/images/smilies/icon_sad.gif)
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
#139
Part of the Furniture
Join Date: May 2003
Location: Sunny Devon
Posts: 178
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
get the ford 5/30w oil been told its good,as you may know wrong oil in a zetec will make it rattle, not run right etc
i put in a morris "running in" oil,done 5 miles drained it & put some good old mineral in ,running in oil was like porriage!!!
i am running 5/30w,got a rattle but i am convienced its the cam followers,ordering a new set in the morning & fitting them tomorrow night will let you know if it stops the "rattle"
what chip & injectors are you going running, what map sensor?
glad the running in is going well.
i put in a morris "running in" oil,done 5 miles drained it & put some good old mineral in ,running in oil was like porriage!!!
i am running 5/30w,got a rattle but i am convienced its the cam followers,ordering a new set in the morning & fitting them tomorrow night will let you know if it stops the "rattle"
what chip & injectors are you going running, what map sensor?
glad the running in is going well.
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
#140
Advanced PassionFord User
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
yeah i was dubious about the oil but ill get it out asap.
mine seems to go when its warmed up, but its 'just' there if u know what i mean
injectors im not 100% on, as thats up to ahmed, above beiges tho and high impedance for the fez management and a 2.5 bar map sensor
mine seems to go when its warmed up, but its 'just' there if u know what i mean
injectors im not 100% on, as thats up to ahmed, above beiges tho and high impedance for the fez management and a 2.5 bar map sensor
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
#141
Part of the Furniture
Join Date: May 2003
Location: Sunny Devon
Posts: 178
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
fitted new set of followers yesterday,still a little bit of noise there put that down to the new parts want "bedding in",as i only went round the block after i fitted them!
gona go out put a few miles on it over bank holiday w-end.
engine still pinking a little hopefully get that sorted when it goes on rollers,can't see it being the timing as i have had that set up with a dial gauge down through the spark plug hole.
gona go out put a few miles on it over bank holiday w-end.
![Banana](https://passionford.com/forum/images/smilies/banana_dance.gif)
![Banana](https://passionford.com/forum/images/smilies/banana_dance.gif)
engine still pinking a little hopefully get that sorted when it goes on rollers,can't see it being the timing as i have had that set up with a dial gauge down through the spark plug hole.
![Big Grin](https://passionford.com/forum/images/smilies/icon_biggrin.gif)
#147
Advanced PassionFord User
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
well ive changed the oil, still no improvement on noise,
its smoking like an arse, but goes well
so... after fitp its all coming apart again and back to the engineers for a strip down to try n find out whats going on![Sad](https://passionford.com/forum/images/smilies/icon_sad.gif)
maybe next year
its smoking like an arse, but goes well
so... after fitp its all coming apart again and back to the engineers for a strip down to try n find out whats going on
![Sad](https://passionford.com/forum/images/smilies/icon_sad.gif)
maybe next year
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
#150
Advanced PassionFord User
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
as the engineers didnt do the best of jobs rebuilding the lump, its coming out again for another (and hopefully correct this time) rebuild
so we kicked it off tonite in the rain, was at fitp yesterday, hopefully get it done for ford fair![Grin](https://passionford.com/forum/images/smilies/icon_smile.gif)
![](http://ubernealie.users.btopenworld.com/images/rebuild/DSC00796.JPG)
![](http://ubernealie.users.btopenworld.com/images/rebuild/DSC00797.JPG)
car pulled right into the garage and the door brought down to stave off the wetness
one last dying shot....
![](http://ubernealie.users.btopenworld.com/images/rebuild/DSC00798.JPG)
fannymoulds gone
![](http://ubernealie.users.btopenworld.com/images/rebuild/DSC00799.JPG)
![](http://ubernealie.users.btopenworld.com/images/rebuild/DSC00802.JPG)
the weather and darkness got the better of us, jus need to break the mounts etc n lift the fooker out now
![](http://ubernealie.users.btopenworld.com/images/rebuild/DSC00805.JPG)
![](http://ubernealie.users.btopenworld.com/images/rebuild/DSC00806.JPG)
so we kicked it off tonite in the rain, was at fitp yesterday, hopefully get it done for ford fair
![Grin](https://passionford.com/forum/images/smilies/icon_smile.gif)
car pulled right into the garage and the door brought down to stave off the wetness
one last dying shot....
![Sad](https://passionford.com/forum/images/smilies/icon_sad.gif)
fannymoulds gone
the weather and darkness got the better of us, jus need to break the mounts etc n lift the fooker out now
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
#152
Advanced PassionFord User
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Originally Posted by Twins
![Surprised](https://passionford.com/forum/images/smilies/shocked.gif)
![Clap](https://passionford.com/forum/images/smilies/9c-clap.gif)
was running about in it for a while. managed not to kill it tho lol!
soul destroying redoing work eh?
![Sad](https://passionford.com/forum/images/smilies/icon_sad.gif)
hopefully wont be too long before shes back on the road, have to have a link up at rs meet or summit i reallllly wanna mooch round urs
![Content](https://passionford.com/forum/images/smilies/content.gif)
#153
10K+ Poster!!
iTrader: (1)
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Oi, and where were you yesterday??
Spoke to Daz for a bit, but he said that you were far to busy to come and speak to the likes of me
Not really PMSL!! I see you chatting to a couple of fellas, so i left you too it as i was walking around with the misses.
Maybe Southend again eh?
![Rolling Eyes](https://passionford.com/forum/images/smilies/icon_rolleyes.gif)
Spoke to Daz for a bit, but he said that you were far to busy to come and speak to the likes of me
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
Not really PMSL!! I see you chatting to a couple of fellas, so i left you too it as i was walking around with the misses.
Maybe Southend again eh?
#154
Advanced PassionFord User
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
lmao!!! ossry dude, id got me chair out when daz went to meet you and raging cattle would not have moved me from that spot how fooked i was pmsl!!!
i had a wander round for a bit but didnt notice the PF stand
but tbh i didnt look hard enuff probly
shud have come n butted in dude, i probly wanted saving.... dodgy northern ppl
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
i had a wander round for a bit but didnt notice the PF stand
![Red Faced](https://passionford.com/forum/images/smilies/icon_redface.gif)
shud have come n butted in dude, i probly wanted saving.... dodgy northern ppl
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
#155
PassionFord Post Troll
Join Date: May 2004
Location: Robin Hood Country!!
Posts: 3,038
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Looked absolutley fantastic at FITP Chris, best mk6 interior ive ever seen. Lovin the flocked dash! Top work fella, im sure itll be back and chattering very soon!!
![Clap](https://passionford.com/forum/images/smilies/9c-clap.gif)
![Clap](https://passionford.com/forum/images/smilies/9c-clap.gif)
#158
Advanced PassionFord User
![Default](https://passionford.com/forum/images/icons/icon1.gif)
good luck mate...
mines apart again after a headgasket change a month ago!!! really test`s ya patience!!!
but will always come back bigger and stronger!!!
see ya using company tools on ya car too!!!!
mines apart again after a headgasket change a month ago!!! really test`s ya patience!!!
but will always come back bigger and stronger!!!
see ya using company tools on ya car too!!!!
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![Big Grin](https://passionford.com/forum/images/smilies/icon_mrgreen.gif)
#159
Advanced PassionFord User
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Originally Posted by pau1rs
see ya using company tools on ya car too!!!!
![Big Grin](https://passionford.com/forum/images/smilies/icon_mrgreen.gif)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![Big Grin](https://passionford.com/forum/images/smilies/icon_mrgreen.gif)
![Confused](https://passionford.com/forum/images/smilies/icon_confused.gif)
![Wink](https://passionford.com/forum/images/smilies/icon_wink.gif)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
soul destroying aint it, feeling of accomplishment then ripping the fooekr to bits again
![Sad](https://passionford.com/forum/images/smilies/icon_sad.gif)