F2 Maxi Build Lucifer II - RL7's and a BIG Turbo!
#802
Lucifer II - 666
Thread Starter
Cheers
My new fibreglass boot!!!!!!!!! so chuffed to have got these made now.
Thanks to Phil at PBFProducts - SportingFords trader.
My new fibreglass boot!!!!!!!!! so chuffed to have got these made now.
Thanks to Phil at PBFProducts - SportingFords trader.
#804
Lucifer II - 666
Thread Starter
His work is perfect mate, he also made my bonnet, wouldn't use anyone else now.
#805
Lucifer II - 666
Thread Starter
Didn't really touch L2 this weekend as its been mental and doing some stuff on van ended up in A&E lol
Put tank back together and used new alum key bolts, looks loads better now.
Put tank back together and used new alum key bolts, looks loads better now.
#806
Lucifer II - 666
Thread Starter
Long road trip today with Kieron and Mick to collect everyones boots! Thanks to the lads for today.
Here me boot, rediculously light too!!! perfect fit.
Love it!
Here me boot, rediculously light too!!! perfect fit.
Love it!
#808
Lucifer II - 666
Thread Starter
I don't know mate, don't do dead lines now but I am on it lol loads of progress to come soon!
#809
Lucifer II - 666
Thread Starter
Got my inlet today and trial fitted my 52's on, needs very minimal work and the trumpers need the usualy flating of edges to fit strate, will get on it asap.
Chuffed to bits with it.
Chuffed to bits with it.
#812
Lucifer II - 666
Thread Starter
Cheers lads.
#813
Lucifer II - 666
Thread Starter
My mate wrapped these for me, his idea! not to sure on um myself and probably wont be fitting them.
#814
Lucifer II - 666
Thread Starter
had a fellow RS enthusiast visit my unit today to collect his boot and he said he found L2 insperational, so I decided to give myself a bit of insperation! porn pic's -
#816
Lucifer II - 666
Thread Starter
Thanks bud, gona be a few weeks before more updates but will have the engine in bay next month if all goes to plan.
#818
Lucifer II - 666
Thread Starter
Hoping for next month mate
Got to weld in my GrpA mounts first using a mock up block and empty gear box.
Got to weld in my GrpA mounts first using a mock up block and empty gear box.
#820
Lucifer II - 666
Thread Starter
Thanks bud, gives me something to look at when not able to get to unit lol
#822
Lucifer II - 666
Thread Starter
Thanks bud
#823
Lucifer II - 666
Thread Starter
rear beam update -
Originally Posted by SamT
managed to do a small amount on the beam 2day, i'll finish it one day i promise lol
Milling down some spacers
snug fit
some mock up
More bits done to the bracket
cut some more tube and mitred the ends for a nice fit
bolted up
i'll try and do some more tomorrow
Milling down some spacers
snug fit
some mock up
More bits done to the bracket
cut some more tube and mitred the ends for a nice fit
bolted up
i'll try and do some more tomorrow
#825
Lucifer II - 666
Thread Starter
Cheers bud, I have still to buy a suitable rear anti roll bar for it yet, I know I can purchase a sierra one that';ll fit for now that's bladed.
Idealy I'd like WRC bladed adjustable item but they aint cheap lol
Idealy I'd like WRC bladed adjustable item but they aint cheap lol
#826
Lucifer II - 666
Thread Starter
Sam's been busy again today!
Originally Posted by SamT
got in the garage this afternoon.
Second horizontal tube cut.
diagnol cut
then same for the otherside
welded the inserts in
Welded the bracket onto the main tube
started welded the tubes on
where i left it. need to remove it from the jig so i can fully weld the tubes on and weld on the diagnols
Second horizontal tube cut.
diagnol cut
then same for the otherside
welded the inserts in
Welded the bracket onto the main tube
started welded the tubes on
where i left it. need to remove it from the jig so i can fully weld the tubes on and weld on the diagnols
Last edited by Minirotty; 07-03-2012 at 07:38 PM.
#827
Lucifer II - 666
Thread Starter
How good does this look off of the jig!!!
Originally Posted by SamT
Lame update, but i welded on the left hand tube not diagnol though, was out most of the day and ran out of gas, so need a refill before i can do anymore, but its off the jig now and is looking good
tubes placed on just for pics lol
tubes placed on just for pics lol
#828
10K+ Poster!!
iTrader: (9)
Looking good mate,
Although as a bit of constructive criticism id recommend putting adjustable bushes in so the arms are adjustable in situ, as by the looks of yours you have to undo the rose joint completely and remove from the bracket then turn and re fit every time to adjust it,
These are the kind of thing you want to fit
Although as a bit of constructive criticism id recommend putting adjustable bushes in so the arms are adjustable in situ, as by the looks of yours you have to undo the rose joint completely and remove from the bracket then turn and re fit every time to adjust it,
These are the kind of thing you want to fit
#829
Lucifer II - 666
Thread Starter
Alrite mate, those bushes you've posted up shouldn't be need on the rear beem due to it not really being made for adjustment in that area. The bushes are in situ to allow for the beem to have more independence and not static like the standard beem.
Tow in and out and camber will be achieved with shims etc on the hub face of the beem.
Where I do need those bushes you've posted up though is in my ZOO front arms, crap design of bushes he's placed in as I will need to remove the arm every time I need to adjust it and setting up will be a nightmare.
How much would 4 of those be?
Tow in and out and camber will be achieved with shims etc on the hub face of the beem.
Where I do need those bushes you've posted up though is in my ZOO front arms, crap design of bushes he's placed in as I will need to remove the arm every time I need to adjust it and setting up will be a nightmare.
How much would 4 of those be?
#831
Lucifer II - 666
Thread Starter
Cheers, they're now on my shopping list
#832
Lucifer II - 666
Thread Starter
Started modifying my dash panel readyfor RaceTech2 dash and swithces, never done fibreglassing before so bare with me lol
Got to do filler work on it next.
Got to do filler work on it next.
#834
Lucifer II - 666
Thread Starter
That's Sam for you mate, he's ability to learn is amazing, self taught welder.
#835
Lucifer II - 666
Thread Starter
To show how light the boot is my mate held it with one finger -
#837
Lucifer II - 666
Thread Starter
lol very light mate.
#838
Lucifer II - 666
Thread Starter
Not realy an update but some chat re- me car.
Been working on a few cars up at my unit past few weeks and few mates been looking over L2.
One tuck the piss cause I have cotten sheets under car cover (Ginge) lol and another who paints told me I needs to get a good layer of protection on to the paint even though it's in storage because the covers were putting more and more swirl marks into the paint due to them being taken on and off.
So popped to Halfords today lol for polish! got the three stage Maguires stuff and went up and gave it a wipe over after taking family out for dinner.
Hers is a photo from other day showing paint not looking to great -
Now heres some from today after the three stages -
Only did the front and the passenger side, when I tried to put the sheets and car cover back on on my own it was a nightmare as it all kept sliding off as the paints that smooth
Been working on a few cars up at my unit past few weeks and few mates been looking over L2.
One tuck the piss cause I have cotten sheets under car cover (Ginge) lol and another who paints told me I needs to get a good layer of protection on to the paint even though it's in storage because the covers were putting more and more swirl marks into the paint due to them being taken on and off.
So popped to Halfords today lol for polish! got the three stage Maguires stuff and went up and gave it a wipe over after taking family out for dinner.
Hers is a photo from other day showing paint not looking to great -
Now heres some from today after the three stages -
Only did the front and the passenger side, when I tried to put the sheets and car cover back on on my own it was a nightmare as it all kept sliding off as the paints that smooth
#839
Advanced PassionFord User
Stunning Kev, now get it finished!!!!
#840
Lucifer II - 666
Thread Starter
It'll get there Jon, it's a project, these things take time lol