My 397BHP Zetec Turbo 3dr. Its over...
#371
Wahay!! I've lost my Virginity!!
Join Date: Jul 2005
Location: Essex
Posts: 87
Likes: 0
Received 0 Likes
on
0 Posts
Dan,
I'm not as clued up as i'd like with zetec's but have you aimed to increase the bore size with smaller crowned pistons or are they meant to be that size?
What to spec then???
I'm not as clued up as i'd like with zetec's but have you aimed to increase the bore size with smaller crowned pistons or are they meant to be that size?
What to spec then???
#373
I've found that life I needed.. It's HERE!!
Join Date: Jul 2004
Location: Cumbria/Preston
Posts: 1,294
Likes: 0
Received 0 Likes
on
0 Posts
You know...seing the block and head together like that with the flash going off the way it did...it would look pretty damn tidy with the head in white enamel! What colour's the car going to be? If white, that would look bloody clean! A ceramic coated exhaust to go with it!
#374
Lee Fordham
hello mate, the pistons are 0.5mm oversize, so its more like a 2.05 litre lol
they are low comp tho, should be 7.8:1 as thats what i asked for, but the pistons do sit 2.5mm lower than the deck height at TDC, whereas std pistons sit 0.5mm above the block height at TDC
smitsturbo
Give dave at urban racing a ring mate, he sorted me the wheels out. i dont have their number off hand tho
heeman10
lol the head is silver, and no, the car aint gonna be white lol
its going to primary designs for a manifold and system when i get it back, so hopefully they ceramic coat the manifold too
hello mate, the pistons are 0.5mm oversize, so its more like a 2.05 litre lol
they are low comp tho, should be 7.8:1 as thats what i asked for, but the pistons do sit 2.5mm lower than the deck height at TDC, whereas std pistons sit 0.5mm above the block height at TDC
smitsturbo
Give dave at urban racing a ring mate, he sorted me the wheels out. i dont have their number off hand tho
heeman10
lol the head is silver, and no, the car aint gonna be white lol
its going to primary designs for a manifold and system when i get it back, so hopefully they ceramic coat the manifold too
#376
lil update, i got a call at 2.30 today asking me to pop down to the bodyshop to sort out the fitment of the bias pedal box, i said i can pop down next tursday as i will be out the office till then...
they guy says err, i mean NOW!
so off i trot down there lol
darren has spent the last 2 days working on it and it looks shit hot!
he has rebuilt the arches now to look like they should lol, and he has pretty much finished blending it all in.
he has also fitted the mounts for the drivers seat, and still to do the passenger side.
and then we get onto the pedal box
what a complete CUNT it is to that fucker to fit
still, i think we have come up with a solution, so fingers crossed all will be good.
and the reason why i had to go down today?
because monday/tuesday the whole car will be in primer!!
ooooooooooooh yes!
i did take some piccys, but didnt get back to the office till 7pm so not done owt with them yet.
so you will have to wait till thurs/friday - where hopefully ill have some of it in primer too!
i cant wait, it scoming on now!
BIG UP TO DARREN AT WESTON ACCIDENT REPAIR CENTRE - hes my hero lol
they guy says err, i mean NOW!
so off i trot down there lol
darren has spent the last 2 days working on it and it looks shit hot!
he has rebuilt the arches now to look like they should lol, and he has pretty much finished blending it all in.
he has also fitted the mounts for the drivers seat, and still to do the passenger side.
and then we get onto the pedal box
what a complete CUNT it is to that fucker to fit
still, i think we have come up with a solution, so fingers crossed all will be good.
and the reason why i had to go down today?
because monday/tuesday the whole car will be in primer!!
ooooooooooooh yes!
i did take some piccys, but didnt get back to the office till 7pm so not done owt with them yet.
so you will have to wait till thurs/friday - where hopefully ill have some of it in primer too!
i cant wait, it scoming on now!
BIG UP TO DARREN AT WESTON ACCIDENT REPAIR CENTRE - hes my hero lol
#382
PassionFord Post Whore!!
Join Date: Jul 2004
Location: Wiltshire, Bath, chippenham area!
Posts: 7,428
Likes: 0
Received 4 Likes
on
4 Posts
any news fudgery-gar? PICS or Stay STFU
PS: hope you are getting the upper spoiler/whale tail sprayed too,
i Promise you will want it on when you see the car withouth it
PS: hope you are getting the upper spoiler/whale tail sprayed too,
i Promise you will want it on when you see the car withouth it
#383
cheers guys
actually vickers you queer! im not getting the 500 spoiler painted.
i have got another spoiler for it now, not gonna give too much away but its about as tall as the roof!
anyway, more bodyshop pics.
it should hopefully be in primer now
seat subframe mounts
half of the pedal box bracket (was a RIGHT CUNT trying to it right!)
obv nees welding in but Darren was just measuring up
rear glass removed and all bits ground off for poly carb windows
plates welded over un needed holes
bodykit all blended in
small dent filled lol
and photobucket is being gay and wont upload the others...
actually vickers you queer! im not getting the 500 spoiler painted.
i have got another spoiler for it now, not gonna give too much away but its about as tall as the roof!
anyway, more bodyshop pics.
it should hopefully be in primer now
seat subframe mounts
half of the pedal box bracket (was a RIGHT CUNT trying to it right!)
obv nees welding in but Darren was just measuring up
rear glass removed and all bits ground off for poly carb windows
plates welded over un needed holes
bodykit all blended in
small dent filled lol
and photobucket is being gay and wont upload the others...
#390
PassionFord Post Whore!!
Join Date: Jul 2004
Location: Wiltshire, Bath, chippenham area!
Posts: 7,428
Likes: 0
Received 4 Likes
on
4 Posts
Fudgeeeee.. Remember the night we got them Arches off
Ryan , outside Lewis' ??
he explained to us why a lot of 3dr arches are cut to shit like that didnt he?? hope mateys hard work with thearches dont get
ruined by the big wheels
coming on though
Ryan , outside Lewis' ??
he explained to us why a lot of 3dr arches are cut to shit like that didnt he?? hope mateys hard work with thearches dont get
ruined by the big wheels
coming on though
#391
Part of the Furniture
Originally Posted by fudgeass
yep, hopefully the inside and cage will be painted by today, and the outside primered.
they didnt want to paint the outside until the cage goes back in just incase it gets scratched
they didnt want to paint the outside until the cage goes back in just incase it gets scratched
#396
PassionFord Post Whore!!
Join Date: Jul 2004
Location: Wiltshire, Bath, chippenham area!
Posts: 7,428
Likes: 0
Received 4 Likes
on
4 Posts
Originally Posted by mk1racer
you are simply just a cunt
fudgee. 17s are big enough when the car is designed to take 15s!
+ having it as silly low as i expect you wil run it