Daniel-1986

couple little odd things done to the car

smoked the headlights and got some Heko wind deflectors





also got some crystal indicators and smoked them with the excess tint film I had lying around



then fitted side lights to indicators just to be different lol

Slaney21

iTrader: (1)

What side bulbs are in your headlights matey? Looking at getting some cree bulbs as sidelights but fear they might be too bright.

cheers

Slaney21

iTrader: (1)

Sorry should of mentioned i was referring to the ones in this pic

Daniel-1986

I took the sidelight bulbs out the headlights and routed them to the indicators instead, the holders are still there to be used but tucked inside the headlight housing

I got these ones fitted

http://www.ebay.co.uk/itm/1210965131...84.m1439.l2649

Glenn_

iTrader: (1)

They look well.

Daniel-1986

Gonna be buying these on friday

Daniel-1986

Been a busy body today, had a scratching/grindi noise coming from the drivers side wheel despite changin pretty much evetything so changed the last thing today which was the wheel bearing so hoping that noise gone now

sridgett

Nice car mate

LIFE'S SHORT SO FLOOR IT.

Daniel-1986

Cheers, ive color coded the dashboard and im just waiting for my US rear lights, honeycomb grills and coulple other little goodies to arrive

Daniel-1986

US lights fitted without modifying but was lucky they came with the loom for them





still go the original indicator plug



cant get the bulbs in amber so had to use granville amber light paint

Colin_P

You could get some diadem bulbs in there.

You probably know this but they are chrome when off but orange when on.

sridgett

The cars lookin smart mate.

LIFE'S SHORT SO FLOOR IT.

Daniel-1986

Ive tried amber 501 bulbs but they dont work the indicators flash like a bulb has gone, im using the american bulbs that came with the lights which dont flash kike a bulb has gone

Glenn_

iTrader: (1)

Them back lights look well.

Daniel-1986

I never had to modify the lights for the bulb holders since these SVT/ZX3 lights luckily came with its own loom so chopped the reverse loom off and connected to my indicator loom without removing the plug and the flash rates the same, the only downside is although u can get the bulbs in this country I don't think you can get them in amber hence the tint paint to the bulb

one picture i never put up was how i connected to the SVT reverse loom to my indicator loom whilst still retaining the UK indicator plug

Daniel-1986

now got smoked facelift headlights fitted and bumper indicators rewired as DRLs and bought some -40mm springs and got a spare splitter in the shed waiting to go on



I had a spare set of front shocks in the shed so swapped the springs over and just waiting to fit them when I got time


cars nearly to how I want it