rs1600i caught fire today
#324
PassionFord Post Whore!!
#326
PassionFord Post Whore!!
To be honest this car needs you to finish it, MOT it, TAX it, enjoy it for a small while.
Meantime am sure a Mag feature crop up..
If you sell now the car will not be the same.
Meantime am sure a Mag feature crop up..
If you sell now the car will not be the same.
#327
Shizzle My Nizzle
Thread Starter
iTrader: (1)
Join Date: Aug 2006
Location: ESSEX
Posts: 3,755
Likes: 0
Received 0 Likes
on
0 Posts
Here is what it looked like in febuary 2009
And its home
really
3 seats
And dont even get me started on the engine rebuild
Just dont know if the cars good enough? I mean its a hell of a story, but dont know if id like to put my name to the car?
Ive been bombarded with emails last night already asking me how much the car is etc.
After a nights sleep I realise no matter what happens, I have to MOT it.
Last edited by Lee Ivatt; 11-07-2009 at 07:45 AM.
#330
Shizzle My Nizzle
Thread Starter
iTrader: (1)
Join Date: Aug 2006
Location: ESSEX
Posts: 3,755
Likes: 0
Received 0 Likes
on
0 Posts
No worries, sorry to waffle on a bit, but hopefully gave you enough info to get an idea!
Been stripping the paint off the bonnet this moring and also preping it and just gave it a coat of primer.
My mrs just came out and suggested maybe i should break the car rather than try and sell it?
Hadnt thought of that, could sell it as a complete car less engine and loom and ideal for some one to whack in a RST lump. And also then sell the engine and all its bits as one unit.
Ive spent over Ł1000 alone just rebuilding the engine!
I told her I think if im gna put it up for sale Im loosing like Ł2500 but Just gona have to swallow that i think if i go this route?
Been stripping the paint off the bonnet this moring and also preping it and just gave it a coat of primer.
My mrs just came out and suggested maybe i should break the car rather than try and sell it?
Hadnt thought of that, could sell it as a complete car less engine and loom and ideal for some one to whack in a RST lump. And also then sell the engine and all its bits as one unit.
Ive spent over Ł1000 alone just rebuilding the engine!
I told her I think if im gna put it up for sale Im loosing like Ł2500 but Just gona have to swallow that i think if i go this route?
Last edited by Lee Ivatt; 12-07-2009 at 09:04 AM.
#334
Shizzle My Nizzle
Thread Starter
iTrader: (1)
Join Date: Aug 2006
Location: ESSEX
Posts: 3,755
Likes: 0
Received 0 Likes
on
0 Posts
Having second thoughts now. I did this this afternoon.
Then sat in the drivers seat holding the 4 spoke wheel and came over all soppy. Just had a thought....how nice it would be to drive it round the village, and just have that proud feeling of "look how far you (the car) and I have been through
:thumbsup:
Dash in
Bracket refinished
Then sat in the drivers seat holding the 4 spoke wheel and came over all soppy. Just had a thought....how nice it would be to drive it round the village, and just have that proud feeling of "look how far you (the car) and I have been through
:thumbsup:
Dash in
Bracket refinished
#335
Glennvestite
iTrader: (1)
Join Date: Jul 2006
Location: Darlington county durham
Posts: 62,764
Received 1,044 Likes
on
998 Posts
I totaly agree with you mate.Get it finished mate.Even if you do sell it you could always keep in touch with the new owner and go and visit the car and give it cuddles lol.
#342
Shizzle My Nizzle
Thread Starter
iTrader: (1)
Join Date: Aug 2006
Location: ESSEX
Posts: 3,755
Likes: 0
Received 0 Likes
on
0 Posts
Seriously:
2k plastic primer Rover hurricane grey in base cost with 5% satin matt flatting agent
Arrh well suppose so, the fire was 5 weeks ago today, 1.5 of them weeks I was away working in france.
So yeh, I guess ive done pretty well then
#343
PassionFord Post Whore!!
Gettin there mate, once the grafix are on, MOT'd Tax etc (by this wednesday the way your carrying on ) you will have a mahoosive grin.
If this was put in a mag as a feature then i would deffo buy it even after following this thread
Last edited by wirralphil; 12-07-2009 at 09:02 PM.
#345
not knocking your painting (as it loads better than mine!), but have you thought about flatting/polishing it up before you fit it up as its looks really orange peely/flat. Or are you in a rush to get it together?
#347
BANNED
BANNED
iTrader: (1)
Join Date: Dec 2007
Location: Milton Keynes
Posts: 1,314
Likes: 0
Received 0 Likes
on
0 Posts
Please dont sell or break her Lee....... The effort and work that you have put into her would be heart breaking to pull her to bits to sell or even sell her how she is.
As you say mate..... Sitting back holding onto the 4 spoke steering wheel in such a rare and fantastic car, well that would conclude any doubts of selling or breaking her to be erased!
Once again mate, thank you for your help on doing my roof. Gave it a polish last night, its come up like new! I manged to get the car Ł125 cheaper because of the roof, cost in materials to do the roof Ł36......nice little saving there
As you say mate..... Sitting back holding onto the 4 spoke steering wheel in such a rare and fantastic car, well that would conclude any doubts of selling or breaking her to be erased!
Once again mate, thank you for your help on doing my roof. Gave it a polish last night, its come up like new! I manged to get the car Ł125 cheaper because of the roof, cost in materials to do the roof Ł36......nice little saving there
#348
easy tiger! Like i was saying, i wasnt knocking it and havent seen it in the flesh, but that last picture looks WELL orange peely. Might be my gay monitor at work.
THIS IS NOT A CRITICSM POST
THIS IS NOT A CRITICSM POST
Last edited by boXXer; 13-07-2009 at 11:56 AM.
#351
Shizzle My Nizzle
Thread Starter
iTrader: (1)
Join Date: Aug 2006
Location: ESSEX
Posts: 3,755
Likes: 0
Received 0 Likes
on
0 Posts
No not had a chance flat out with work, done 2 days work in a day today!
Will have tommrow morning off to spend a bit of time on it........Polishing the ...uhhh hummmm......paint before puting on the decals.
As for running, Im probably gna try in vain to test for 12+ on the coil, then if no luck will have to pay someone to take a look as I REALLY dont know how to test and repair the broken link, where ever that is.
My guess is the coils i bought of off a guy Seriesoneturbo forum are actually duff ones
Or the loom side of my sensor wire, i havnt repaired properly?
Or the ecu,
or maybe im just not getting alive feed to the coils in the 1st place
#354
Shizzle My Nizzle
Thread Starter
iTrader: (1)
Join Date: Aug 2006
Location: ESSEX
Posts: 3,755
Likes: 0
Received 0 Likes
on
0 Posts
Im not sure, one more thing on the check list.
Its sitting well home and held buy the proper black metal sensor wire/gbox cover with the rubber spacer on it, so I assume so? Ill have to check the workshop manual for the correct gap and measure it!
Right just been out and given the front end a mop, havnt gone too crazy as the paint on bonnet is only 24hrs old!
Please excuse the white "mopping overspray" on the plastic and wheels. I look like a spoty albino also covered in the stuff
Im generally pleased with the finish, obviously its not perfect, but then I never wanted that from the start. The idea has always been do have a smart tidy car, but one that you can use with out fearing a stone chip or dirt in the wheel arches!
I couldnt resist pulling out these bad boys
The gap between the bonnet edge and decal I have done at 10mm, I cant remember if this is correct or not, but i got carried away in the excitment
Starting to look like she did 5 weeks ago /
Its sitting well home and held buy the proper black metal sensor wire/gbox cover with the rubber spacer on it, so I assume so? Ill have to check the workshop manual for the correct gap and measure it!
Right just been out and given the front end a mop, havnt gone too crazy as the paint on bonnet is only 24hrs old!
Please excuse the white "mopping overspray" on the plastic and wheels. I look like a spoty albino also covered in the stuff
Im generally pleased with the finish, obviously its not perfect, but then I never wanted that from the start. The idea has always been do have a smart tidy car, but one that you can use with out fearing a stone chip or dirt in the wheel arches!
I couldnt resist pulling out these bad boys
The gap between the bonnet edge and decal I have done at 10mm, I cant remember if this is correct or not, but i got carried away in the excitment
Starting to look like she did 5 weeks ago /
#357
How??
Join Date: May 2009
Location: Grangemouth (Twinned with Deliverance)
Posts: 633
Likes: 0
Received 0 Likes
on
0 Posts
Top work Lee mate. Bet you will be well chuffed when she is running again!! Credit to you mate you hung in there when many the rest of us would have packed it off to the great scrap yard in the sky!!
#358
Shizzle My Nizzle
Thread Starter
iTrader: (1)
Join Date: Aug 2006
Location: ESSEX
Posts: 3,755
Likes: 0
Received 0 Likes
on
0 Posts
The car is booked in to the auto electrictian on monday.
I know its the easy way out, but the time i spend fucking around and still not getting anywhere and just more pissed off with the car. I may as well go earn the money and pay a professional to do it in half the time and do it right!
Good news is tho, this weekend im giving the car the once over.
Providing Lee (Reynolds) can kindly sort me out on the clutch cable in time. The car should be back wednesday next week, running ...............and therefore MOT ready!!!!!
So potentially the car could be on the road one week from now!